PerTronix 1847V Ignitor Electronic Ignition Conversion Kit for Bosch 4 Cylinder Engines

Introdução

This manual provides detailed instructions for the installation, operation, and maintenance of your PerTronix 1847V Ignitor Electronic Ignition Conversion Kit. This kit is designed to replace traditional mechanical points in Bosch 4-cylinder distributors, enhancing ignition performance and reliability.

Produto acimaview

The PerTronix 1847V Ignitor is an electronic ignition system that eliminates the need for mechanical points and condenser. It utilizes a Hall Effect integrated circuit and rotating cobalt magnets to provide precise, stable timing and increased spark energy.

Figura 1: Complete PerTronix 1847V Ignitor kit showing the electronic module, magnetic sleeve, wiring, and mounting hardware.

O que está na caixa:

• Ignitor Electronic Module (1847V)
• Magnetic Sleeve
• Chicote de fios com conectores
• Mounting Plates and Screws
• Instruções de instalação (consulte este manual)

Principais características

• Points Replacement: Converts mechanical points ignition to a reliable electronic system.
• Desempenho aprimorado: Delivers double the voltage to spark plugs, improving horsepower, fuel economy, and extending spark plug life.
• Sem manutenção: Epoxy molded design resists dirt, oil, grease, and moisture, eliminating the need for routine adjustments.
• Precise Timing: Utilizes cobalt magnets and a Hall Effect circuit for stable, adjustment-free timing with improved accuracy.
• Design compacto: Fits entirely within the distributor, maintaining a classic under-hood appearance without external ignition boxes.
• Ampla aplicação: Suitable for various automotive, marine, industrial, and agricultural applications using compatible Bosch 4-cylinder distributors.

Compatibilidade

The PerTronix 1847V Ignitor Electronic Ignition Conversion Kit is specifically designed for use with Bosch 4-Cylinder Distributors. Verify your distributor type before installation.

Informações de segurança

AVISO: Este produto pode expô-lo a produtos químicos, incluindo chumbo, que é conhecido no estado da Califórnia por causar câncer e defeitos congênitos ou outros danos reprodutivos. Para obter mais informações, vá para www.P65Warnings.ca.gov.

Always disconnect the vehicle's battery before performing any electrical work. Ensure proper grounding and follow all local safety regulations. Wear appropriate personal protective equipment (PPE) during installation.

Configuração e instalação

Installation of the PerTronix Ignitor kit requires basic mechanical and electrical knowledge. If you are unsure about any step, consult a qualified mechanic.

1. Preparação:
   • Disconnect the vehicle's battery (negative terminal first).
   • Remova a tampa do distribuidor e o rotor.
   • Carefully remove the existing mechanical points and condenser from the distributor.
2. Install Ignitor Module:
   • Mount the Ignitor module in the position previously occupied by the points. Secure it using the provided mounting plates and screws.
   

   Figura 2: Fechar-se view of the Ignitor module mounted within a distributor, showing its compact fit.

   
   Figura 3: The Ignitor module with its mounting plate, illustrating how it secures into the distributor.
3. Install Magnetic Sleeve:
   • Slide the magnetic sleeve over the distributor shaft, ensuring it sits securely over the cam lobes. This sleeve replaces the function of the points cam.
   • Observação: Some installations may require minor modification to the rotor or distributor shaft for proper fitment of the magnetic sleeve. Refer to specific vehicle service manuals if needed.
4. Conexões de fiação:
   • Connect the Ignitor's red wire to the positive (+) side of the ignition coil.
   • Connect the Ignitor's black wire to the negative (-) side of the ignition coil.
   • Certifique-se de que todas as conexões estejam seguras e livres de corrosão.
5. Reassembly and Initial Start-up:
   • Reinstall the rotor and distributor cap.
   • Reconnect the vehicle's battery (positive terminal first).
   • Start the engine and check for proper operation.
   • Verify ignition timing using a timing light and adjust as necessary according to your vehicle's specifications.

For detailed wiring diagrams and specific vehicle instructions, always refer to the official PerTronix installation guide provided with your product or available on the manufacturer's website.

Operação

Once installed, the PerTronix 1847V Ignitor operates automatically, providing a consistent and powerful spark. No user adjustments are required during normal operation. The system continuously monitors engine speed and position to deliver optimal ignition timing.

Manutenção

The PerTronix 1847V Ignitor is designed to be a maintenance-free ignition system. Unlike traditional points, there are no mechanical components to wear out or adjust. The epoxy-molded construction protects the internal electronics from environmental factors such as dirt, oil, grease, and moisture.

Regularly inspect wiring connections for security and signs of wear or corrosion. Ensure the distributor cap and rotor are in good condition.

Solução de problemas

If you experience issues after installing your PerTronix Ignitor, consider the following common troubleshooting steps:

• No Spark/Engine Not Starting:
  • Verify all wiring connections are correct and secure (red to coil +, black to coil -).
  • Verifique o volume adequadotage at the ignition coil and Ignitor module.
  • Ensure the magnetic sleeve is correctly seated on the distributor shaft and rotates freely.
  • Inspect the distributor cap and rotor for cracks or carbon tracking.
  • Confirm the ignition coil is compatible with electronic ignition systems.
• Rough Idling/Poor Performance:
  • Re-check ignition timing with a timing light and adjust to vehicle specifications.
  • Ensure spark plug wires are correctly routed and in good condition.
  • Verify spark plug gaps are set correctly.
• Operação intermitente:
  • Verifique se há conexões soltas ou fiação danificada.
  • Ensure the Ignitor module is securely mounted and not vibrating.

For further assistance, contact PerTronix customer support.

Especificações

Figura 4: Feature comparison table for PerTronix Ignitor, Ignitor II, and Ignitor III electronic ignition systems. This product is the original Ignitor.

Informações de garantia

The PerTronix 1847V Ignitor Electronic Ignition Conversion Kit comes with a Garantia limitada de 30 meses. This warranty covers defects in materials and workmanship under normal use. For specific terms and conditions, please refer to the warranty documentation included with your product or visit the official PerTronix website.

Suporte ao cliente

For technical assistance, installation questions, or warranty claims, please contact PerTronix customer support directly. Refer to the contact information provided on the product packaging or the official PerTronix website.