Ushio BC8852 CFL Bulb Instruction Manual

Introdução

This manual provides essential information for the safe and effective use of your Ushio BC8852 Compact Fluorescent Lamp (CFL). Please read these instructions carefully before installation and operation. Retain this manual for future reference.

Image: Ushio BC8852 CFL Bulb. This image displays the compact fluorescent lamp, highlighting its spiral design and G24q-2 base.

Informações de segurança

Sempre siga as precauções básicas de segurança ao usar produtos elétricos para reduzir o risco de incêndio, choque elétrico e ferimentos pessoais.

• Certifique-se de que a energia esteja desligada no disjuntor antes da instalação, remoção ou inspeção.
• Do not use in fully enclosed fixtures unless specified for CFL use, as this can shorten bulb life.
• Avoid touching the bulb with bare hands during operation or immediately after turning off, as it may be hot.
• Do not use with standard dimmer switches unless the bulb and fixture are specifically rated for dimmable CFLs. This bulb is dimmable.
• Dispose of broken bulbs according to local regulations, as they contain small amounts of mercury.

Configuração e instalação

1. Verificar compatibilidade: Ensure your fixture is designed for a G24q-2 base and 18-watt CFL bulbs.
2. Desligar: Before installation, turn off the power to the fixture at the main circuit breaker or fuse box.
3. Remova a lâmpada antiga (se aplicável): If replacing an existing bulb, allow it to cool completely. Gently twist and pull the old bulb straight out from the socket.
4. Instalar nova lâmpada: Align the 4 pins of the Ushio BC8852 bulb with the slots in the G24q-2 socket. Gently push the bulb straight into the socket until it is firmly seated. Do not force the bulb.
5. Restaurar energia: Após a lâmpada estar instalada com segurança, restabeleça a energia na luminária.

Image: Energy Efficiency Label for Ushio BC8852. This label provides details on the bulb's energy consumption and light output, confirming its specifications.

Instruções de operação

The Ushio BC8852 CFL bulb operates like a standard light bulb once installed correctly.

• Ligar/Desligar: Use the fixture's switch to turn the light on or off.
• Tempo de aquecimento: CFLs may take a short period to reach full brightness, especially in colder environments. This is normal operation.
• Recurso regulável: This bulb is designed to be dimmable. Ensure your fixture and dimmer switch are compatible with dimmable CFLs for optimal performance. Using an incompatible dimmer may cause flickering or damage to the bulb.

Manutenção

The Ushio BC8852 CFL bulb requires minimal maintenance.

• Limpeza: Certifique-se de que a energia esteja desligada e a lâmpada esteja fria antes de limpá-la. Limpe a lâmpada delicadamente com um pano macio e seco. Não use produtos de limpeza líquidos ou materiais abrasivos.
• Substituição: Replace the bulb when it reaches the end of its operational life (approximately 10,000 hours) or if it begins to flicker or fail. Follow the installation steps for replacement.

Solução de problemas

Especificações

Garantia e Suporte

The manufacturer's warranty information for the Ushio BC8852 CFL Bulb is indicated as "Not applicable." For any product inquiries or support, please refer to the retailer or the original point of purchase.