Introdução
The Strymon El Capistan dTape Echo pedal is designed to emulate the natural warmth and unique sonic characteristics of classic tape delay units. Utilizing advanced SHARC DSP technology, it offers three distinct tape machine styles and a wide range of adjustable parameters, along with bonus features like onboard spring reverb and a sound-on-sound looper. This manual provides detailed instructions for setting up and operating your El Capistan pedal.
Principais características
- Five tape adjustment and tone shaping knobs: Time, Mix, Tape Age, Repeats, Wow & Flutter.
- Ultra low noise, high performance 24-bit 96kHz A/D and D/A converters.
- 115dB typical signal to noise ratio.
- Super high performance DSP in a compact form factor.
- True Bypass (electromechanical relay switching).
Configurar
To set up your Strymon El Capistan pedal, follow these steps:
- Conexão de energia: Connect a 9V DC power supply (center-negative, 100mA minimum) to the 9VDC input jack on the rear of the pedal. Ensure the power supply meets the specified requirements to prevent damage.
- Conexão de entrada: Connect your instrument (e.g., guitar) to the INPUT jack on the rear of the pedal using a standard 1/4-inch instrument cable.
- Conexão de saída: Connect the LEFT OUT and/or RIGHT OUT jacks to your amplifier or audio interface using 1/4-inch instrument cables. For mono operation, use the LEFT OUT jack. For stereo operation, use both LEFT OUT and RIGHT OUT.
- Expression Pedal (Optional): An optional expression pedal can be connected to the EXP jack for real-time control over various parameters.
Instruções de operação
The El Capistan offers a comprehensive set of controls to shape your tape echo sound. Familiarize yourself with the primary and secondary functions of each control.
Controles Primários
- TEMPO: Controls the delay time of the echo repeats.
- MISTURA: Adjusts the wet/dry ratio of the effect. Turn clockwise for more effect, counter-clockwise for less.
- TAPE AGE: Controls the bandwidth of the tape, simulating the degradation of older tape.
- REPETE: Controls the feedback of the delay, determining the number of repeats.
- Uau e vibração: Controls the amount of mechanically related tape speed fluctuations, adding vintage personagem.
- TAPE HEAD Switch: Selects between three tape head configurations: Fixed, Multi, and Single.
- Interruptor de MODO: Selects between three different tape machine modes (A, B, C), each with unique characteristics.
- Pedal TAP: Tap twice to set the delay time. Hold to engage the Sound-on-Sound Looper.
- BYPASS do pedal: Envolve ou ignora o efeito.
Secondary Controls (Hidden Parameters)
The El Capistan features secondary functions accessible by holding both footswitches while powering on, or by holding the TAP footswitch and turning a knob. Refer to the full user manual for detailed instructions on accessing and adjusting these parameters.
- TIME (Secondary): Controls the spring reverb mix.
- MIX (Secondary): Controls a +/- 3dB boost/cut.
- REPEATS (Secondary): Controls the tape bias.
- TAPE AGE (Secondary): Controls the low-end contour.
- WOW & FLUTTER (Secondary): Controls the amount and severity of tape irregularities.
Manutenção
To ensure the longevity and optimal performance of your El Capistan pedal:
- Mantenha o pedal limpo e livre de poeira. Use um pano macio e seco para a limpeza.
- Evite expor o pedal a temperaturas extremas, umidade ou luz solar direta.
- Do not attempt to open the enclosure or modify the internal components, as this will void the warranty.
- Always use the correct power supply (9V DC, center-negative, 100mA minimum) to prevent electrical damage.
Solução de problemas
| Problema | Possível causa | Solução |
|---|---|---|
| Sem som ou sinal fraco | Incorrect cable connections, faulty cables, incorrect power supply, pedal not engaged. | Check all cable connections (input/output). Ensure cables are not damaged. Verify power supply specifications. Press the BYPASS footswitch to engage the effect. |
| Ruído ou zumbido indesejado | Loop de terra, fonte de alimentação defeituosa, interferência de outros componentes eletrônicos. | Use an isolated power supply. Try a different power outlet. Move the pedal away from other electronic devices. |
| Effect not working as expected | Incorrect knob settings, secondary functions engaged unintentionally. | Review the operating instructions for knob functions and switch settings. Reset the pedal to factory defaults if necessary (refer to the full user manual for this procedure). |
| Footswitch unresponsive | Internal issue, debris under footswitch. | Ensure the pedal is powered correctly. If the issue persists, contact Strymon support. |
Especificações
- Marca: Strymon
- Nome do modelo: El Capistán
- Número do modelo: Elcapistan
- Estilo: Delay, Looper, Reverb
- Cor: Black, Gray, Silver
- Volumetage: 9 Volts
- Ampidade: 100 Miliamps
- Efeitos de saída de áudio: Atraso
- Tipo de controles: Botão
- Fonte de energia: Elétrico com fio
- Interface de hardware: Áudio de 1/4 de polegada
- Formato do sinal: Analógico
- Dimensões do item: 8 x 8 x 5 polegadas
- Tipo de conector: Conector de áudio de 1/4 de polegada (6.35 mm)
- Código UPC: 852636007232
- Componentes incluídos: Sound-on-Sound Looper, Onboard Spring Reverb
Garantia e Suporte
Strymon products are designed for reliability and performance. For warranty information, product registration, or technical support, please visit the official Strymon webou entre em contato com o departamento de atendimento ao cliente. Guarde seu comprovante de compra para eventuais solicitações de garantia.