Anchor Audio AN-30 AC Powered Speaker Monitor User Manual

1. Produto acabadoview

The Anchor Audio AN-30 is a compact and powerful AC-powered speaker monitor designed for clear audio reproduction in various settings. Its robust construction and efficient design make it suitable for presentations, small events, and personal monitoring.

Anchor Audio AN-30 AC Powered Speaker Monitor, front view

Figura 1.1: Frente view of the Anchor Audio AN-30 speaker monitor, showcasingraças ao seu design compacto e à grade do alto-falante.

Principais características:

AC powered for continuous operation.
Delivers 109 dB of clear sound output.
Equipped with a 30W ampmais vivo.
Capable of reaching crowds of 50+ people.
Lightweight design, weighing only 2.5 lbs.

2. Guia de configuração

This section provides instructions for setting up your AN-30 speaker monitor.

2.1 Conteúdo da caixa:

Anchor Audio AN-30 Speaker Monitor
AC Adapter (if included with your specific package)

2.2 Connecting the Speaker:

Traseira view of Anchor Audio AN-30 showing DC In, Power switch, Line In, Line Out, and Line In ports

Figure 2.1: Rear panel of the AN-30, illustrating the various input and output connections.

Conexão de energia: Locate the "DC IN" port on the rear panel. Connect the provided AC adapter to this port and then plug the adapter into a standard AC power outlet.
Entrada de áudio: The AN-30 features multiple audio input options:
- Entrada de linha (RCA): Use the RCA (red and white) inputs for connecting audio sources such as CD players, mixers, or other line-level devices.
- Line In (1/4" Jack): Use the 1/4" (6.35mm) jack for connecting instruments, microphones (with appropriate pre-amplification), or other audio equipment.
Connect your audio source to the desired input.
Saída de áudio (opcional): The "LINE OUT" RCA ports allow you to daisy-chain multiple AN-30 units or send the audio signal to another ampmais vital ou dispositivo de gravação.
Ligar: Once all connections are secure, flip the "POWER" switch to the ON position. The power indicator light (if present) should illuminate.

3. Instruções de operação

Follow these steps for optimal performance of your AN-30 speaker monitor.

Figura 3.1: Frente view of the AN-30, highlighting the speaker and brand logo.

Controle de volume: Adjust the volume knob on the rear panel to achieve the desired audio level. Start with the volume low and gradually increase it to prevent sudden loud sounds.
Audio Source Playback: Begin playing audio from your connected source.
Monitoramento: Position the AN-30 speaker monitor to direct sound towards your intended audience or monitoring position. Its compact size allows for versatile placement.
Desligar: When finished, turn the "POWER" switch to the OFF position before disconnecting the AC adapter or audio cables.

4. Manutenção

Proper care and maintenance will ensure the longevity and optimal performance of your AN-30 speaker monitor.

Limpeza: Use a soft, dry cloth to wipe down the exterior of the unit. For stubborn dirt, a slightly damp cloth can be used, but ensure no moisture enters the speaker grille or ports. Avoid abrasive cleaners or solvents.
Armazenar: Store the unit in a cool, dry place away from direct sunlight and extreme temperatures. If storing for extended periods, disconnect all cables.
Manuseio: Always handle the speaker with care. Avoid dropping or subjecting it to strong impacts, which can damage internal components.
Ventilação: Ensure the speaker's vents are not obstructed during operation to prevent overheating.

5. Solução De Problemas

This section addresses common issues you might encounter with your AN-30 speaker monitor.

Problema	Possível causa	Solução
Sem saída de som	A alimentação não está conectada ou o aparelho está desligado. Volume muito baixo. Conexão de entrada de áudio incorreta. Faulty audio cable or source.	Certifique-se de que o adaptador CA esteja conectado e o interruptor de energia esteja LIGADO. Aumente o volume. Verify audio source is connected to the correct input (Line In). Test with a different audio cable or source.
Som distorcido	Sinal de entrada muito alto (distorção). Volume muito alto. Alto-falante danificado.	Reduce the output volume from your audio source. Lower the volume on the AN-30. If distortion persists at low volumes, contact support.
Sem indicador de energia	Adaptador CA desconectado ou com defeito. A tomada elétrica não está funcionando.	Check AC adapter connection to unit and wall outlet. Teste a tomada elétrica com outro dispositivo. Certifique-se de que o interruptor de energia esteja ligado.

6. Especificações

Detailed technical specifications for the Anchor Audio AN-30 AC Powered Speaker Monitor.

Recurso	Especificação
Marca	Áudio âncora
Modelo	AN-30
Potência máxima de saída do alto-falante	30 Watts
Tecnologia de Conectividade	Auxiliary (RCA, 1/4" Jack)
Modo de saída de áudio	Estéreo
Tipo de montagem	Freestanding
Dimensões do produto	6.5 x 5.5 x 5.5 polegadas
Peso do item	2.6 libras
Fabricante	Anchor Audio, Inc

7. Garantia e Suporte

Anchor Audio products are designed for reliability and performance. For specific warranty details, please refer to the warranty card included with your product or visit the official Anchor Audio website.

Suporte ao cliente:

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Anchor Audio customer support:

Website: www.anchoraudio.com
Telefone: Consulte o website para números de contato regionais.

Please have your product model (AN-30) and serial number ready when contacting support.