RAB Lighting FFLED39 Future Flood LED Light User Manual

1. Produto acabadoview

The RAB Lighting FFLED39 Future Flood LED Light is a high-performance, energy-efficient outdoor floodlight designed for various applications. This hardwired fixture features a durable bronze finish and provides cool white illumination.

Figure 1: RAB Lighting FFLED39 Future Flood LED Light

Principais características:

• Poder: 39-watt LED
• Temperatura de cor: 5100K Branco Frio
• Vida útil: 100,000 hours based on LM-80 tests
• LEDs: Three multi-chip 13-watt high-performance LEDs
• Óptica: NEMA type 7H x 6V with Air-flow technology heatsink
• Refletor: Semi-specular anodized aluminum
• Juntas: silicone de alta temperatura
• Terminar: Bronze chip and fade-resistant polyester powder coat
• Volumetage: 120-volt to 277-volt operation

2. Informações de segurança

Read all instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or other hazards. Keep this manual for future reference.

• Segurança elétrica: Installation must be performed by a qualified electrician in accordance with all national and local electrical codes. Ensure power is disconnected at the circuit breaker before installation or servicing.
• Aterramento: The fixture must be properly grounded to prevent potential electric shock.
• Montagem: Ensure the mounting surface is structurally sound and capable of supporting the fixture's weight (approximately 10.23 lbs).
• Temperatura de operação: Não utilize o equipamento fora da faixa de temperatura especificada.
• LEDs: Do not stare directly into the LED light source when the fixture is operating, as this may cause eye damage.

3. Instalação

This floodlight is designed for wall mounting and requires hardwired installation. Professional installation is recommended.

Ferramentas necessárias:

• Chave de fenda (Phillips e ponta chata)
• Descascadores de fios
• Alicate
• Drill (if mounting surface requires pilot holes)
• Chave ajustável

Opções de montagem:

The FFLED39 supports various mounting options. The standard fixture comes with a wall mount. Optional accessories may include slipfitter mounts or other specialized brackets.

Figura 2: Example of a Slipfitter Mount (optional accessory)

Etapas de instalação:

1. Desconecte a energia: Turn off power at the circuit breaker before beginning installation. Verify power is off using a voltage testador.
2. Preparar a superfície de montagem: Securely attach the mounting bracket to the desired wall location. Ensure the bracket is level and firmly fastened.
3. Conexões de fios:
   • Connect the black wire from the fixture to the hot (L) wire from the power supply.
   • Connect the white wire from the fixture to the neutral (N) wire from the power supply.
   • Connect the green or bare copper wire from the fixture to the ground wire from the power supply.
   • Utilize conectores de fios apropriados e certifique-se de que todas as conexões estejam seguras.
4. Montagem do dispositivo: Attach the FFLED39 fixture to the mounting bracket. Secure it with the provided screws or bolts.
5. Ajustar mira: Loosen the adjustment screws on the fixture to aim the light as desired. Tighten the screws firmly once the desired angle is achieved.
6. Restaurar energia: Turn on power at the circuit breaker. Test the fixture for proper operation.

4. Operação

The RAB Lighting FFLED39 is a hardwired floodlight. Its operation is typically controlled by an external switch or a photocell (if installed).

Operação padrão:

• Once installed and wired, the fixture will illuminate when power is supplied via the connected wall switch or control system.
• Ensure the power source is within the specified 120-277V range.

Photocell Control (Optional):

If a photocell is integrated or installed with the fixture, the light will automatically turn on at dusk and off at dawn, based on ambient light levels.

Figura 3: Example of a Photocell (optional accessory)

5. Manutenção

The FFLED39 LED floodlight is designed for minimal maintenance due to its long-life LED components and durable construction.

Limpeza:

• Exterior: Limpe periodicamente a parte externa da luminária com um pano macio e seco.amp Use um pano para remover sujeira, poeira e detritos. Não utilize produtos de limpeza abrasivos ou solventes.
• Lente: Gently wipe the lens with a clean, soft cloth to ensure maximum light output.

Inspeção:

• Inspecione periodicamente a luminária para verificar se há sinais de danos, conexões soltas ou desgaste.
• Ensure all mounting hardware remains tight and secure.
• If any damage is observed, disconnect power and contact a qualified electrician for repair or replacement.

6. Solução De Problemas

If you experience issues with your FFLED39 floodlight, refer to the following troubleshooting guide:

If the problem persists after following these steps, contact RAB Lighting customer support or a qualified electrician.

7. Especificações

Detailed technical specifications for the RAB Lighting FFLED39 Future Flood LED Light:

Figure 4: Indication of 100,000-hour LED lifespan

8. Garantia e Suporte

Garantia do fabricante:

The RAB Lighting FFLED39 Future Flood LED Light is covered by a Garantia do fabricante de 1 anos a partir da data da compra. Esta garantia cobre defeitos de materiais e de fabricação sob uso e serviço normais.

The warranty does not cover damage resulting from improper installation, accident, misuse, abuse, negligence, or unauthorized modification or repair.

Suporte ao cliente:

For technical assistance, warranty claims, or further information, please contact RAB Lighting customer support. Refer to the official RAB Lighting website para informações de contato atualizadas.