Hama LED Safety Lights (2-pack) Instruction Manual

Introdução

Thank you for choosing the Hama LED Safety Lights. This manual provides essential information for the proper setup, operation, and maintenance of your safety lights. These lights are designed to enhance your visibility in low-light conditions, making them ideal for activities such as running, cycling, or walking, and for increasing the safety of children and pets.

Please read these instructions carefully before using the product and keep them for future reference.

Configurar

1. Desembalagem e Conteúdo

Retire cuidadosamente todos os componentes da embalagem. Verifique se todos os itens estão presentes:

• 2 x Hama LED Safety Lights
• 4 x CR2032 Button Cell Batteries (pre-installed or separate)
• 1 x Small Screwdriver

2. Battery Installation / Replacement

The safety lights operate on CR2032 button cell batteries. If the lights are dim or do not turn on, the batteries may need to be installed or replaced.

1. Locate the small screw on the back of the light unit.
2. Use the provided screwdriver to carefully loosen the screw and open the battery compartment.
3. Insert two CR2032 batteries into each light unit, ensuring the correct polarity (+/-) as indicated inside the compartment.
4. Close the battery compartment and tighten the screw securely. Do not overtighten.

Image: Hama LED Safety Light with its clip open, revealing the internal battery compartment where two CR2032 batteries are inserted.

3. Attaching the Safety Light

The Hama LED Safety Lights feature a robust clip for easy attachment to various items.

• Identify a suitable attachment point such as clothing (shirt, jacket), a belt, a backpack strap, or a pet collar.
• Open the clip by pressing the top and bottom parts together.
• Securely attach the light to your chosen item, ensuring it is firmly gripped by the clip and faces the desired direction for maximum visibility.

Image: A backpack with two Hama LED Safety Lights clipped onto its straps, demonstrating a typical attachment method for enhanced visibility.

Operating the Safety Light

Each Hama LED Safety Light has a single button for controlling its functions.

1. Ligar: Press the button once to turn the light on. It will typically start in the constant light mode.
2. Modos de mudança: Press the button repeatedly to cycle through the available light modes:
   • Luz constante: Provides a steady illumination.
   • Piscando rápido: Rapid blinking for increased attention.
   • Piscando lentamente: Slower blinking pattern.
3. Desligar: After cycling through all modes, pressing the button one more time will turn the light off.

Image: Two Hama LED Safety Lights shown illuminated with a red glow, demonstrating their operational state.

For optimal visibility, position the lights where they are clearly visible to others, especially from the rear or front depending on your activity.

Image: A person running outdoors during sunset, wearing a Hama LED Safety Light clipped to their shorts, illustrating practical use for visibility.

Manutenção

Substituição da bateria

When the light becomes dim or stops working, it is time to replace the batteries. Refer to the "Battery Installation / Replacement" section under Setup for detailed instructions. Always use two fresh CR2032 button cell batteries for each light.

Limpeza

To clean the safety lights, wipe them with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the plastic housing or electronic components. Ensure the lights are completely dry before storage or next use.

Armazenar

Store the safety lights in a cool, dry place when not in use. If storing for an extended period, it is recommended to remove the batteries to prevent leakage and potential damage to the device.

Solução de problemas

• A luz não acende:
  • Check if the batteries are correctly installed with the proper polarity (+/-).
  • Replace the batteries with new CR2032 button cells.
• A luz está fraca:
  • The batteries are likely low. Replace them with new CR2032 button cells.

Especificações

Garantia

Specific warranty terms and conditions for the Hama LED Safety Lights may vary by region and retailer. Please refer to the warranty information provided with your purchase documentation or visit the official Hama website for details regarding your product's warranty coverage.

Apoiar

For further assistance, technical support, or to inquire about replacement parts, please visit the official Hama website or contact Hama customer service directly. You can find more information at Hama's Amazon Store ou seus globais website.