Introdução
This manual provides essential information for the safe and efficient operation of your Eaton 5PX 3000 2U Rack/Tower LCD Uninterruptible Power Supply (UPS). The Eaton 5PX 3000 is designed to provide reliable power protection for servers, storage, and network equipment. Please read this manual thoroughly before installation and operation.
Informações de segurança
Observe as seguintes precauções de segurança para evitar ferimentos e danos ao UPS ou aos equipamentos conectados:
- Segurança elétrica: Esta unidade contém vol perigosotages. Do not open the UPS enclosure. Servicing should only be performed by qualified personnel.
- Segurança da bateria: Batteries can present a risk of electrical shock and high short-circuit current. Remove watches, rings, or other metal objects before handling batteries. Use tools with insulated handles.
- Ambiente de instalação: Install the UPS in a controlled environment, free from excessive dust, moisture, and extreme temperatures. Ensure adequate ventilation.
- Aterramento: Always connect the UPS to a grounded power outlet.
- Peso: The UPS is heavy. Use proper lifting techniques or assistance during installation to avoid injury.
Conteúdo da embalagem
Verifique se todos os itens estão presentes na embalagem:
- Eaton 5PX 3000 2U Rack/Tower LCD UPS Unit
- Rack mounting kit (rails, screws)
- Tower stand kit
- Cabo USB
- Cabo serial
- Cabo de alimentação de entrada
- Cabos de alimentação de saída
- Guia de início rápido e instruções de segurança
Configurar
1. Instalação Física
The Eaton 5PX 3000 can be installed in a standard 19-inch rack or as a tower unit.
Instalação em rack:
- Attach the rack mounting rails to the rack using the provided hardware.
- Carefully slide the UPS unit onto the installed rails until it is fully seated.
- Secure the front of the UPS to the rack using the provided screws.
Instalação da torre:
- Attach the tower stands to the bottom of the UPS unit.
- Place the UPS on a stable, level surface, ensuring adequate clearance for ventilation.
2. Conectando energia
Connect the UPS to a dedicated, grounded electrical outlet using the supplied input power cord. Ensure the outlet matches the UPS voltage requisitos (120V).
3. Conexão de Equipamentos
Connect your critical equipment (servers, network devices) to the output receptacles on the rear of the UPS. The UPS features 7 outlets with various connector types (L5-30P, 5-20R, L5-30R). Distribute the load evenly across the outlets if possible.
Imagem: Frente view of the Eaton 5PX 3000 2U Rack/Tower LCD UPS, showing the LCD display and front panel controls.
4. Inicialização da alimentação
- After connecting all equipment and the input power, press and hold the power button on the front panel for a few seconds until the LCD display illuminates.
- The UPS will perform a self-test and then display its operational status.
- Allow the UPS batteries to charge for at least 24 hours before relying on them for extended backup power.
Operacional
Exibição LCD sobreview
The front panel LCD provides real-time information about the UPS status, battery charge, load level, and various settings. Use the navigation buttons to scroll through menus and adjust parameters.
Funções básicas
- Ligar/desligar: Press and hold the power button to turn the UPS on or off.
- Alarme mudo: Briefly press any button to silence an active alarm.
- Auto teste: Initiate a battery self-test through the LCD menu to check battery health.
Gerenciamento de bateria
The UPS automatically manages battery charging and discharge. For optimal battery life, avoid frequent deep discharges. The LCD will indicate battery charge level and estimated runtime.
Integração de Software
The Eaton 5PX 3000 supports communication with computers and network management systems via USB or serial ports. Install Eaton's power management software (available from the Eaton website) for advanced monitoring, graceful shutdown of connected devices, and remote management capabilities.
Manutenção
Substituição da bateria
The batteries in your UPS are user-replaceable. The typical lifespan of UPS batteries is 3-5 years, depending on usage and environmental conditions. The UPS LCD or management software will indicate when battery replacement is recommended. Always use genuine Eaton replacement battery modules to ensure compatibility and performance. Refer to the detailed battery replacement instructions in the full product manual or on the Eaton support website.
Limpeza
Periodically clean the exterior of the UPS with a soft, dry cloth. Ensure ventilation openings are free from dust and obstructions to maintain proper airflow and cooling.
Atualizações de Firmware
Eaton may release firmware updates to improve performance or add features. Check the Eaton support website periodically for available updates and follow the provided instructions for installation.
Solução de problemas
This section addresses common issues you might encounter with your Eaton 5PX 3000 UPS.
| Problema | Possível causa | Solução |
|---|---|---|
| O nobreak não liga. | Sem alimentação de entrada; bateria não conectada ou descarregada. | Check power cord connection and wall outlet. Ensure internal battery connectors are secure. Allow batteries to charge. |
| O nobreak emite bipes continuamente. | On battery power; Overload; Battery fault | Check input power. Reduce connected load. Perform a battery self-test or consider battery replacement. |
| Autonomia curta da bateria | Overload; Old batteries; Batteries not fully charged | Reduce connected load. Replace batteries if they are old. Allow batteries to charge for 24 hours. |
| LCD shows an error code | Internal fault; Specific issue | Refer to the full user manual for a list of error codes and their corresponding solutions. Contact technical support if the issue persists. |
Especificações
Key technical specifications for the Eaton 5PX 3000 2U Rack/Tower LCD UPS (Model: 5PX3000RT2U):
- Marca: Comer
- Número do modelo: 5PX3000RT2U
- Fator de forma: Rack/Torre (2U)
- O quetage: 3000 Watts
- Potência máxima: 2700 Watts
- Potência de saídatage: 2430 Watts
- Volumetage: 120 Volts
- Vol de entradatage: 120 Volts (CA)
- Volume de saídatage: 120 Volts (CA)
- Corrente de saída: 20.25 Amps
- Faixa de frequência: 47-53 Hz and 56.5-63.5 Hz
- Número de saídas: 7
- Tipo de conector: L5-30P, 5-20R, L5-30R
- Tipo de plugue de alimentação: Tipo B - 3 pinos (América do Norte)
- Composição da célula da bateria: Chumbo ácido
- Runtime (typical): 20 minutes (at half load)
- Material do gabinete: Liga de aço
- Cor: Preto
- Peso do item: 0.01 Pounds (Note: This weight is likely incorrect in the source data and should be verified with actual product specifications)
Garantia e Suporte
Informações de garantia
Eaton provides a standard warranty for the 5PX 3000 UPS. The specific terms and duration of the warranty may vary by region and purchase date. Please refer to the warranty card included with your product or visit the official Eaton webPara informações detalhadas sobre a garantia e o registro, acesse o site.
Suporte Técnico
For technical assistance, troubleshooting beyond this manual, or to inquire about replacement parts, please contact Eaton customer support. Support contact information can be found on the official Eaton website ou na documentação fornecida com o seu UPS.