AOLIKES 902035 600mAh Replacement Battery User Manual

1. Introdução

This manual provides essential information for the safe and effective use of your AOLIKES 902035 600mAh Replacement Lithium-ion Battery. Please read this manual thoroughly before installation and use.

Imagem 1.1: Topo view of the AOLIKES 902035 600mAh Lithium-ion Battery, displaying its model number and voltage especificações.

2. Produto acabadoview

The AOLIKES 902035 is a 3.7V rechargeable Lithium-ion battery designed as a replacement for various portable electronic devices.

Principais características:

• Volumetage: 3.7V nominal, 4.2V fully charged.
• Capacidade: 600mAh (2.22Wh).
• Modelo: PL902035.
• Proteção: Built-in battery protection circuit module (PMC) to prevent overdischarge and short circuit.
• Conector: Genuine JST Connector Ph1.25, 2-Pin.

Imagem 2.1: Lateral view of the AOLIKES 902035 battery, highlighting the attached JST 2-Pin connector.

3. Configuração e instalação

Follow these steps for proper installation of the replacement battery:

1. Preparação: Ensure the device is powered off and disconnected from any power source before beginning the replacement process.
2. Old Battery Removal: Carefully remove the old battery from your device. Note its orientation and wiring.
3. Verificação de polaridade: Before connecting the new battery, compare its wiring with the old battery. The red wire on the AOLIKES 902035 battery connects to the positive (+) power pole, and the black wire connects to the negative (-) power pole. Ensure correct polarity to prevent damage to the device or battery.
4. Conexão: Connect the JST 2-Pin connector of the new battery to the corresponding port on your device's circuit board.
5. Posicionamento seguro: Place the new battery securely within the device's battery compartment.
6. Remontagem: Reassemble your device carefully.

Imagem 3.1: Detalhada view of the JST 2-Pin connector, showing its dimensions for compatibility verification.

4. Instruções de operação

Once installed, the battery operates as a standard power source for compatible devices. For optimal performance:

• Carga inicial: It is recommended to fully charge the battery before its first use in the device.
• Carregamento: Use a charger compatible with 3.7V Lithium-ion batteries. Avoid overcharging or using incompatible chargers.
• Descarga: Avoid completely draining the battery to 0% charge, as this can reduce its lifespan.
• Temperatura: Operate the battery within recommended temperature ranges (typically 0°C to 45°C for charging, -20°C to 60°C for discharging).

5. Manutenção e armazenamento

• Limpeza: Keep battery contacts clean and free from dust or debris. Use a dry, soft cloth for cleaning.
• Armazenar: If storing the battery for an extended period, charge it to approximately 50% and store in a cool, dry place away from direct sunlight and extreme temperatures.
• Verificação Ordinária: Periodically check the battery for any signs of swelling, leakage, or damage. Discontinue use immediately if any issues are observed.

6. Solução De Problemas

7. Especificações

8. Safety Warnings and Disposal

• Do not disassemble, puncture, short circuit, or expose the battery to fire or high temperatures.
• Mantenha fora do alcance de crianças.
• Do not use if the battery appears damaged, swollen, or leaking.
• Descarte as baterias de forma responsável, de acordo com as normas locais. Não as descarte no lixo doméstico.