Introdução
Thank you for choosing the Beurer BF 220 Body Composition Digital Scales. This manual provides important information regarding the setup, operation, maintenance, and troubleshooting of your new scales. Please read these instructions carefully before first use and keep them for future reference.
The Beurer BF 220 scales are designed to measure body weight, body fat, body water, and muscle rate, providing a comprehensive overview da sua composição corporal.
Informações de segurança
- Always place the scales on a firm, level surface to ensure accurate measurements.
- Do not use the scales in areas with high humidity or near water.
- The scales are for personal use only and not intended for medical or commercial purposes.
- Limpe as balanças com anúncioamp cloth; do not use abrasive cleaning agents.
- Mantenha fora do alcance de crianças.
- Individuals with pacemakers or other medical implants should not use the body composition analysis function. Consult your doctor before use.
- A capacidade máxima de carga é de 180 kg. Não ultrapasse esse limite.
Conteúdo da embalagem
- 1 x Beurer BF 220 Body Composition Digital Scales
- 1 x Manual de Instruções
- Batteries (not always included, check product packaging)
Configurar
1. Instalação da bateria
Locate the battery compartment on the underside of the scales. Insert the required batteries, ensuring correct polarity (+/-). Close the battery compartment securely.
2. Unit Selection (Kg/Lb/St)
After battery installation, or by pressing a dedicated button (often on the underside or near the display), you can select your preferred unit of measurement: kilograms (kg), pounds (lb), or stones (st). The scales feature a Kg/Lb/St selector.
3. Colocação Inicial
Place the scales on a hard, flat, and stable surface. Avoid carpets or uneven flooring, as this can affect accuracy.
Instruções de operação
Pesagem Básica
- Step onto the scales barefoot. The scales will automatically turn on due to the "Automatic start" feature.
- Stand still until your weight is displayed and stabilizes.
- The scales will automatically turn off after a few seconds of inactivity ("Automatic stop").
Medição da composição corporal
The Beurer BF 220 scales can determine weight, body fat, body water, and muscle rate using bioelectrical impedance analysis (BIA). For accurate results, ensure your feet are clean and make good contact with the brushed stainless steel electrodes.
- Step onto the scales barefoot.
- Wait for your weight to be displayed.
- The scales will then proceed to measure and display your body fat, body water, and muscle rate sequentially.
- For consistent results, measure at the same time of day, preferably in the morning before breakfast or exercise.
Manutenção
Limpeza
Clean the scales regularly with a slightly damp cloth. Do not use harsh or abrasive cleaning agents, as these can damage the surface or electrodes. Do not immerse the scales in water.
Armazenar
Store the scales in a dry, cool place. Avoid extreme temperatures and direct sunlight. If not in use for an extended period, it is recommended to remove the batteries to prevent leakage.
Solução de problemas
| Problema | Possível causa | Solução |
|---|---|---|
| "Err" or "OL" displayed | Sobrecarga ou erro de medição. | The maximum load capacity is 180 kg. Ensure the weight does not exceed this limit. Step off and then back on the scales. |
| Leituras imprecisas | Scales on an uneven surface, low battery, or movement during measurement. | Place scales on a firm, level surface. Replace batteries if low. Stand still during measurement. |
| Sem exibição | As pilhas estão descarregadas ou inseridas incorretamente. | Verifique a polaridade da bateria e substitua-a, se necessário. |
| Body composition not measured | Feet not making proper contact with electrodes, or user has medical implants. | Ensure feet are clean and make full contact with the stainless steel electrodes. If you have medical implants, this function may not work or is not recommended. |
Especificações
- Modelo: Beurer BF 220
- Funções de medição: Weight, Body Fat, Body Water, Muscle Rate
- Mostrar: XXL white illuminated LCD screen, 40 mm number size
- Material da superfície: Safety glass (32 x 32 cm, 8mm thick)
- Eletrodos: Aço inoxidável escovado
- Capacidade de carga: 180 kg
- Precisão de leitura: 100 g
- Dimensões: Aproximadamente 32 x 32 x 2.5 cm (C x L x A)
- Características: Automatic start and stop, Kg/Lb/St selector, Overload indicator, Backlit Display
- Peso do item: 2.3 quilos
- Código GTIN: 04211125748135
Garantia e Suporte
For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official Beurer webGuarde seu comprovante de compra para eventuais solicitações de garantia.
For further assistance, you may contact Beurer customer service directly.