Cadence Acoustic S Q693 300W 6-Inch X 9-Inch 3-Way Q Series Coaxial Car Speakers

Introdução

Thank you for choosing Cadence Acoustic S Q693 3-Way Coaxial Car Speakers. These speakers are designed to deliver high-quality audio performance in your vehicle. This manual provides essential information for proper installation, operation, and maintenance to ensure optimal performance and longevity of your speakers.

Informações de segurança

Please read all safety instructions carefully before installing and operating the speakers. Failure to follow these guidelines may result in injury or damage to the product or vehicle.

• Sempre desconecte o terminal negativo da bateria do veículo antes de iniciar qualquer trabalho elétrico.
• Ensure proper wiring polarity to prevent damage to the speakers and ampmais vivo.
• Não instale alto-falantes em locais que obstruam o funcionamento do veículo ou os recursos de segurança.
• Evite expor as caixas de som à umidade excessiva ou a temperaturas extremas.
• Consulte um instalador profissional se tiver dúvidas sobre qualquer parte do processo de instalação.
• Operate audio systems at safe volume levels to prevent hearing damage.

Conteúdo da embalagem

Verifique se todos os itens estão presentes na embalagem:

• 2 x Cadence Acoustic S Q693 6x9-Inch 3-Way Coaxial Car Speakers
• 2 x Speaker Grilles (if included)
• Acessórios de montagem (parafusos, clipes)
• Cabo de alto-falante (se incluído)
• Manual do usuário (este documento)

Configuração e instalação

Proper installation is crucial for optimal sound quality and speaker longevity. If you are not experienced with car audio installation, it is recommended to seek professional assistance.

1. Verificações de pré-instalação

• Confirm the speakers fit the intended mounting location (e.g., door panels, rear deck). The top-mount depth is 3.25 inches.
• Ensure your vehicle's audio system (head unit, amplifier) is compatible with 4 ohms impedance speakers.
• Gather necessary tools: screwdrivers, wire strippers, crimpers, drill (if needed), electrical tape, multimeter.

2. Montagem dos alto-falantes

1. Remova cuidadosamente os alto-falantes ou painéis de acabamento existentes do local de montagem desejado.
2. Position the new Cadence Q693 speaker in the opening. Mark the screw holes if new holes are required.
3. Drill pilot holes if necessary, ensuring not to damage any vehicle wiring or components behind the mounting surface.
4. Fixe a caixa de som utilizando os parafusos de montagem fornecidos. Não aperte em excesso.

3. Conexões de fiação

Connect the speaker wires to your vehicle's audio system. Pay close attention to polarity.

• Identify the positive (+) and negative (-) terminals on the speaker and the corresponding wires from your amplifier ou unidade principal.
• Connect the positive speaker terminal to the positive output wire from your audio source.
• Connect the negative speaker terminal to the negative output wire from your audio source.
• Certifique-se de que todas as conexões estejam seguras e isoladas para evitar curtos-circuitos.

Figura 1: Cadence Acoustic S Q693 6x9-inch 3-Way Q Series Coaxial Car Speaker. This image displays the speaker's front view, highlighting its orange polypropylene cone, black rubber surround, and the central assembly which integrates the midrange and tweeter, protected by an orange-accented grille.

Instruções de operação

Once installed, your Cadence Q693 speakers are ready for use. Follow these general guidelines for optimal audio experience.

• Inicialização inicial: After installation, reconnect the vehicle's battery. Turn on your head unit at a low volume.
• Controle de volume: Gradually increase the volume to a comfortable listening level. Avoid pushing the speakers to distortion, as this can cause damage.
• Configurações de áudio: Adjust bass, treble, and balance settings on your head unit or amplifier to suit your personal preference. These speakers are designed for a balanced sound profile.
• Período de amaciamento: New speakers may require a short break-in period (typically 10-20 hours of normal use) to achieve their full sound potential. During this time, avoid playing them at extremely high volumes.

Manutenção

Regular care will help maintain the performance and appearance of your speakers.

• Limpeza: Use a soft, dry cloth to wipe down the speaker grilles and frames. For stubborn dirt, a slightly damp cloth can be used, but ensure no moisture enters the speaker cone or voice coil area.
• Evite produtos químicos: Do not use harsh cleaning agents, solvents, or abrasive materials, as these can damage the speaker's finish and components.
• Proteção Ambiental: While designed for automotive use, protect speakers from direct exposure to extreme sunlight, dust, and moisture when possible, especially if installed in open-air environments.

Solução de problemas

Se você tiver problemas com suas caixas de som, consulte os problemas e soluções comuns a seguir:

If the problem persists after attempting these solutions, contact Cadence customer support or a qualified car audio technician.

Especificações

Key technical specifications for the Cadence Acoustic S Q693 speakers:

• Tipo de alto-falante: 6x9-Inch 3-Way Coaxial Car Speakers
• Manuseio de energia: Peak: 300 watts per pair / RMS: 120 watts per pair
• Material do cone: Polypropylene cone with Rubber surround
• Tweeter: 1/2-Inch semi-dome PEI tweeter
• Impedância: 4 ohms
• Resposta de frequência: 55-20,000 Hz
• Sensibilidade: 90 dB
• Profundidade de montagem superior: 3.25 polegadas
• Dimensões do produto: 19.05 x 17.78 x 19.05 cm (7.5 x 7 x 7.5 polegadas)
• Peso do item: 2.25 quilos (4.96 lbs)
• Número do modelo: Q693

Garantia e Suporte

Cadence products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or service, please refer to the warranty card included with your purchase or visit the official Cadence website. Guarde o comprovante de compra para solicitações de garantia.

For further assistance, please contact Cadence customer service.