Introdução
This manual provides essential information for the safe installation, operation, and maintenance of your Heathco HZ-5846-WH Motion Activated LED Security Light. This fixture is designed to provide reliable outdoor lighting with energy-efficient LED technology and motion detection capabilities. Please read these instructions thoroughly before installation and retain them for future reference.
Image: Heathco HZ-5846-WH Motion Activated LED Security Light, showing the two adjustable lamp heads and the motion sensor below.
Informações de segurança
AVISO: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installation or servicing. All electrical connections must be in accordance with local codes, ordinances, or the National Electrical Code (NEC).
- Este produto deve ser instalado por um eletricista qualificado.
- Garantir o fornecimento voltage is 120 VAC, 60 Hz.
- Do not attempt to disassemble or modify the fixture. There are no user-serviceable parts inside.
- Avoid looking directly into the LED light source when illuminated, as this may cause eye damage.
- Mount the fixture securely to a structural surface.
Configuração e instalação
The Heathco HZ-5846-WH security light is designed for either wall mount or eave mount installation. Ensure the mounting location provides adequate coverage for the desired detection area and is within reach of the electrical supply.
Etapas de instalação:
- Desconexão de energia: Desligue a energia no disjuntor ou na caixa de fusíveis antes de iniciar a instalação.
- Local de montagem: Select a suitable wall or eave location. The fixture should be mounted at a height that allows for optimal motion detection and light coverage.
- Fiação: Connect the fixture's wires to the household wiring according to local electrical codes. Typically, this involves connecting the black wire to live, white wire to neutral, and green/bare copper wire to ground.
- Dispositivo seguro: Mount the fixture securely to the junction box or mounting surface using the provided hardware.
- Ajuste Lamp Heads and Sensor: O lamp heads and motion sensor are tool-free adjustable. Position them to cover the desired area.
- Restauração de energia: Após a conclusão da instalação e com todas as conexões seguras, restabeleça a energia no disjuntor.
Instruções de operação
Your Heathco HZ-5846-WH security light features a 180-degree motion detection zone and adjustable settings for optimal performance.
Ajuste do sensor de movimento:
- Faixa: The motion sensor can detect movement up to 40 feet. Adjust the sensor's angle to modify the detection range and area. Avoid pointing the sensor at heat sources or moving objects (e.g., trees, traffic) that could cause false triggers.
- Na hora: The light-on time can be adjusted up to 5 minutes. Use the control dial (if present, typically on the sensor unit) to set how long the light remains illuminated after motion is detected.
Substituição manual:
This fixture includes a manual override function. To activate the manual override, quickly turn the light switch OFF then ON. The light will remain ON continuously. To return to motion-activated mode, quickly turn the light switch OFF then ON again. The light will then operate based on motion detection.
Manutenção
The Heathco HZ-5846-WH security light utilizes energy-saving LED technology, meaning you will never need to change a bulb.
- Limpeza: To maintain the appearance and performance of your fixture, periodically clean the lens and housing with a soft, damp pano. Não use produtos de limpeza abrasivos ou solventes.
- Inspeção: Inspecione periodicamente a luminária para verificar se há sinais de danos ou conexões soltas. Se encontrar algum problema, desligue a energia e consulte um eletricista qualificado.
Solução de problemas
Se a sua luz de segurança não estiver funcionando como esperado, consulte os problemas comuns e suas soluções a seguir:
| Problema | Possível causa | Solução |
|---|---|---|
| A luz não acende. | No power; faulty wiring; sensor not detecting motion. | Check circuit breaker; verify wiring connections; adjust sensor angle and range. |
| A luz permanece acesa continuamente. | Manual override activated; constant motion in detection zone; faulty sensor. | Toggle power switch to reset manual override; reposition sensor; contact support if sensor is faulty. |
| Light turns ON/OFF frequently. | Sensor detecting unwanted motion (e.g., trees, traffic, animals). | Adjust sensor angle and sensitivity to exclude unwanted motion sources. |
| O alcance de detecção é baixo. | Sensor obstruído ou mal posicionado. | Clear obstructions; adjust sensor angle for optimal coverage. |
Se as etapas de resolução de problemas não resolverem o problema, entre em contato com o suporte ao cliente.
Especificações
| Recurso | Detalhe |
|---|---|
| Número do modelo | HZ-5846-WH |
| Marca | Globo Elétrico |
| Fonte de luz | LED integrado |
| Brilho | 1250 Lúmens |
| Temperatura de cor | 5296 Kelvin |
| O quetage | 13.73 Watts |
| Ângulo de detecção de movimento | 180 graus |
| Faixa de detecção de movimento | Até 40 pés |
| Adjustable On-Time | Até 5 minutos |
| Fonte de energia | Corded Electric (120 VAC, 60 Hz) |
| Material | Polycarbonate (Shade), Metal (Fixture) |
| Tipo de montagem | Wall Mount or Eave Mount |
| Nível de resistência à água | Impermeável |
| Dimensões (C x L x A) | 7.54" x 6.79" x 6.22" |
| Peso do item | 1.9 libras |
| UPC | 016963158467 |
Image: Dimensions of the Heathco HZ-5846-WH security light, showing length (7.54"), width (6.79"), and height (6.22").
Garantia e Suporte
Informações sobre garantia:
The manufacturer warranty description for this product is Não aplicável. Please refer to your retailer's return policy for details regarding returns or exchanges.
Suporte ao cliente:
For further assistance, technical support, or inquiries regarding your Heathco HZ-5846-WH Motion Activated LED Security Light, please contact Globe Electric customer service. Refer to the product packaging or the Globe Electric website para informações de contato atualizadas.