Stihl MS 201

Stihl MS 201 TC-M Chainsaw Instruction Manual

Model: MS 201 TC-M | Cutting Length: 35 cm

1. Informações de segurança

Operating a chainsaw can be dangerous if proper safety precautions are not followed. Always read and understand the entire instruction manual before operating the Stihl MS 201 TC-M chainsaw. Failure to follow safety instructions can result in serious injury or death.

Equipamento de Proteção Individual (EPI)

  • Proteção para a cabeça: Wear a safety helmet with face and hearing protection.
  • Proteção para os olhos: Sempre use óculos de segurança ou óculos de proteção.
  • Proteção das mãos: Use luvas de trabalho resistentes.
  • Proteção para as pernas: Use calças ou perneiras de proteção para motosserra.
  • Proteção para os pés: Wear safety boots with steel toes and non-slip soles.

Fuel Handling Safety

  • Always mix and handle fuel in a well-ventilated area, away from ignition sources.
  • Utilize apenas recipientes de combustível aprovados.
  • Não fume durante o reabastecimento.
  • Limpe imediatamente qualquer combustível derramado.

2. Produto acabadoview

The Stihl MS 201 TC-M is a powerful and compact gasoline-powered chainsaw designed for professional tree care and pruning. It features a 35 cm cutting length and is equipped with advanced engine technology for efficient operation.

Stihl MS 201 TC-M Chainsaw, top-side view

Figura 2.1: Vista superior view of the Stihl MS 201 TC-M chainsaw, highlighting the ergonomic handle and engine housing.

Stihl MS 201 TC-M Chainsaw, side view with Stihl logo

Figura 2.2: Lateral view of the Stihl MS 201 TC-M chainsaw, showing the Stihl branding and engine components.

3. Configuração

Desembalagem e montagem

  1. Remova cuidadosamente todos os componentes da embalagem.
  2. Inspect for any shipping damage. If damaged, do not use and contact your dealer.
  3. Verifique se todas as peças listadas na lista de embalagem estão presentes.

Bar and Chain Installation

Proper installation of the guide bar and saw chain is crucial for safe and efficient operation.

  1. Certifique-se de que o freio da corrente esteja desativado.
  2. Remove the chain sprocket cover by loosening the nuts.
  3. Coloque a barra guia sobre os montantes.
  4. Fit the saw chain around the sprocket and into the guide bar groove. Ensure the cutting edges face forward on the top of the bar.
  5. Replace the chain sprocket cover and hand-tighten the nuts. Do not fully tighten yet.
  6. Adjust chain tension (refer to 'Chain Tension Adjustment' in Section 5).
  7. Fully tighten the chain sprocket cover nuts.
Stihl MS 201 TC-M Chainsaw, close-up of chain and bar

Figura 3.1: Close view of the chainsaw's chain and guide bar, illustrating proper assembly.

Fuel and Chain Oil Filling

The MS 201 TC-M operates on a gasoline-oil mixture and requires chain lubricant.

  • Combustível: Use a high-quality unleaded gasoline mixed with Stihl 2-stroke engine oil at the recommended ratio (typically 50:1). Refer to the fuel tank cap for specific ratios.
  • Óleo de Corrente: Fill the chain oil tank with high-quality bar and chain lubricant. Do not use waste oil.

Ensure both caps are securely tightened after filling.

4. Instruções de operação

Iniciando a Motosserra

  1. Coloque a motosserra sobre uma superfície firme e nivelada.
  2. Acione o freio de corrente empurrando o protetor de mão dianteiro para a frente.
  3. Set the master control lever to the cold start position (choke).
  4. Hold the chainsaw firmly with one hand on the front handle and place your foot on the rear handle.
  5. Pull the starter cord slowly until resistance is felt, then pull briskly until the engine fires briefly.
  6. Move the master control lever to the half-throttle position.
  7. Puxe a corda de arranque novamente até o motor ligar.
  8. Blip the throttle to disengage the half-throttle and return to idle.
  9. Desengate o freio da corrente antes de iniciar as operações de corte.

Stopping the Chainsaw

To stop the engine, move the master control lever to the STOP position.

Operação do freio de corrente

The chain brake is a critical safety feature. It can be engaged manually by pushing the front hand guard forward or automatically by inertia during kickback. Always ensure the chain brake is functional before each use.

5. Manutenção

Regular maintenance ensures the longevity and safe operation of your Stihl MS 201 TC-M chainsaw.

Ajuste da Tensão da Corrente

Correct chain tension is vital. A loose chain can derail, and an overly tight chain can cause premature wear to the bar and chain, and reduce engine power.

  1. Loosen the nuts on the chain sprocket cover.
  2. Using the tensioning screw, adjust the chain until it fits snugly against the underside of the guide bar, but can still be pulled around by hand.
  3. Lift the tip of the guide bar slightly while tightening the nuts on the chain sprocket cover.
  4. Check tension again.

Afiação de corrente

A sharp chain is essential for efficient and safe cutting. Sharpen the chain regularly or have it professionally sharpened.

Limpeza do filtro de ar

Clean the air filter regularly to maintain engine performance and prevent damage. Remove the filter cover and clean the filter element with warm soapy water or compressed air. Replace if damaged.

Inspeção de velas de ignição

Inspect the spark plug for wear and proper gap. Replace if electrodes are worn or fouled. Refer to the specifications for the correct spark plug type and gap.

Manutenção da barra guia

Regularly clean the guide bar groove and oil holes. Flip the guide bar periodically to ensure even wear.

6. Solução De Problemas

This section addresses common issues you might encounter with your Stihl MS 201 TC-M chainsaw.

ProblemaPossível causaSolução
O motor não liga.Sem combustível, procedimento de partida incorreto, vela de ignição suja, filtro de combustível entupido.Check fuel level, follow starting instructions, clean/replace spark plug, check fuel filter.
O motor funciona, mas a corrente não se move.Freio da corrente acionado, problema na embreagem.Disengage chain brake. If problem persists, contact service.
Baixo desempenho de corteCorrente cega, tensão incorreta da corrente, guia da corrente gasta.Afie a corrente, ajuste a tensão da corrente, inspecione/substitua a barra guia.
Vibração excessivaLoose components, damaged chain/bar, engine issue.Check all fasteners, inspect chain/bar for damage, contact service if engine related.

7. Especificações

Key technical specifications for the Stihl MS 201 TC-M chainsaw:

  • Número do modelo: MS 201
  • Fonte de energia: Gasolina
  • Comprimento de corte: 35 centímetros
  • Peso do item: 3.85 kg (8.49 libras)
  • Dimensões do produto: 37 x 10 x 37 cm (14.57 x 3.94 x 14.57 polegadas)
  • Material: Plástico (carcaça)
  • Fabricante: STIHL
  • GTIN (UPC): 00795711953546

8. Garantia e Suporte

For warranty information, please refer to the warranty card included with your product or contact your authorized Stihl dealer. Keep your proof of purchase for warranty claims.

For technical support, spare parts, or service, please contact your local authorized Stihl service center. Only use genuine Stihl replacement parts and accessories.