Rolux SET-120F Electronic Halogen Transformer User Manual

Introdução

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Rolux SET-120F Electronic Halogen Transformer. Please read these instructions thoroughly before installation and retain them for future reference.

Instruções de segurança

• Segurança elétrica: A instalação deve ser realizada por um eletricista qualificado, em conformidade com todos os códigos elétricos locais e nacionais.
• Desconexão de energia: Always disconnect power at the main circuit breaker before installing, servicing, or cleaning the transformer.
• Volumetage Compatibilidade: Garantir o volume de entradatage (230-240V AC) matches your electrical supply.
• Compatibilidade de carga: Do not exceed the maximum load of 120 watts and ensure the minimum load of 35 watts is met.
• Ventilação: Ensure adequate ventilation around the transformer to prevent overheating.
• Condições ambientais: Do not expose the transformer to moisture, extreme temperatures, or corrosive environments.
• Escurecimento: This transformer is dimmable with a phase section dimmer. Ensure the dimmer is compatible with electronic transformers.

Características do produto

• Modelo: SET-120F
• Tipo: Electronic Transformer for Low Voltage (LV) Halogen Lamps
• Vol de entradatage: 230-240V AC, 50Hz
• Volume de saídatage: 11.6 V CA (RMS)
• Faixa de potência: 35-120 Watts
• Regulável: Compatible with phase section dimmers.
• Design compacto: Dimensions approximately 148 x 43 x 18 mm (L x W x H).
• Aprovações: VDE, CE, TÜV approved, SELV, EMC compliant.

Configuração e instalação

Importante: Installation should only be carried out by a qualified professional.

1. Desconexão de energia: Before commencing any work, switch off the main power supply at the circuit breaker.
2. Montagem: Mount the transformer in a suitable, well-ventilated location. The mounting type is typically rack mount or surface mount, ensuring secure attachment.
3. Wiring - Primary (Input): Connect the 230-240V AC mains supply to the primary input terminals marked "PRI" on the transformer. Ensure correct polarity (Live, Neutral).
4. Wiring - Secondary (Output): Connect the 12V halogen lamps to the secondary output terminals marked "SEC". Ensure the total wattage of the connected lamps is within the 35-120 Watt range.
5. Escurecimento: If using a dimmer, ensure it is a phase section dimmer compatible with electronic transformers and installed according to its own instructions.
6. Conexão de energia: Após todas as conexões estarem seguras e verificadas, restabeleça a energia no disjuntor.

Figura 1: Rolux SET-120F Electronic Halogen Transformer. The image displays the transformer unit, clearly showing the "SET120F" model number, "PRI" (Primary) input for 230-240V, and "SEC" (Secondary) output for 12V. Various certifications like CE, SELV, and EMC are also visible on the label.

Instruções de operação

The Rolux SET-120F transformer operates automatically once correctly installed and powered. It converts the 230-240V AC mains voltage to a stable 11.6V AC for your low-voltage halogênio lamps.

• Ligar/desligar: Control the power to the lamps via the main light switch or the connected dimmer.
• Função de escurecimento: If a compatible phase section dimmer is installed, adjust the dimmer control to vary the light output of the halogen lamps.
• Operação normal: The transformer is designed for continuous operation within its specified load and temperature limits.

Manutenção

The Rolux SET-120F Electronic Halogen Transformer requires minimal maintenance.

• Limpeza: Ensure the transformer remains free from dust and debris. Disconnect power before gently wiping the exterior with a dry, soft cloth. Do not use liquid cleaners.
• Inspeção: Periodically inspect the wiring connections for any signs of damage or loosening. Address any issues promptly after disconnecting power.
• Nenhuma peça que possa ser reparada pelo usuário: The transformer contains no user-serviceable parts. Do not attempt to open or repair the unit. Refer any issues to a qualified technician.

Solução de problemas

If you experience issues with your Rolux SET-120F transformer, consult the following table:

Especificações

Garantia e Suporte

For warranty information and technical support, please refer to the specific terms provided by your retailer or contact the manufacturer, Rolux, directly. Keep your proof of purchase for any warranty claims.

Fabricante: Rolex

Modelo: SET-120F