Ariete 2718 Xclean Robot Vacuum Cleaner User Manual

Introdução

Thank you for choosing the Ariete 2718 Xclean Robot Vacuum Cleaner. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new robot vacuum. Please read this manual thoroughly before using the appliance and keep it for future reference.

Instruções importantes de segurança

To reduce the risk of fire, electric shock, or injury, always follow basic safety precautions when using your robot vacuum cleaner:

• Leia todas as instruções antes de usar o aparelho.
• Este aparelho não se destina ao uso por pessoas (incluindo crianças) com capacidades físicas, sensoriais ou mentais reduzidas, ou com falta de experiência e conhecimento, a menos que tenham recebido supervisão ou instruções sobre o uso do aparelho de uma pessoa responsável pela sua segurança.
• As crianças devem ser supervisionadas para garantir que não brinquem com o aparelho.
• Do not operate the vacuum cleaner in areas with flammable or combustible liquids, such as gasoline, or in areas where they may be present.
• Não pegue nada que esteja queimando ou soltando fumaça, como cigarros, fósforos ou cinzas quentes.
• Mantenha cabelos, roupas largas, dedos e todas as partes do corpo longe de aberturas e peças móveis.
• Use somente conforme descrito neste manual. Use somente os acessórios recomendados pelo fabricante.
• Não use com cabo ou plugue danificado. Se o aparelho não estiver funcionando como deveria, tiver sido derrubado, danificado, deixado ao ar livre ou caído na água, devolva-o a um centro de serviços.
• The robot is equipped with anti-fall sensors to prevent it from falling down stairs. However, always ensure the area around stairs is clear and well-lit for optimal sensor performance.

Conteúdo da embalagem

Carefully unpack your robot vacuum cleaner and check that all items are present and in good condition. If any items are missing or damaged, please contact customer support.

• Ariete 2718 Xclean Robot Vacuum Cleaner
• Base de carregamento
• Adaptador de energia
• Controle remoto
• Escovas laterais (2 pares)
• Filtro HEPA (pré-instalado)
• Primary Filter (pre-installed)
• Caixote de lixo
• Escova de limpeza

Image: All included accessories for the Ariete 2718 Xclean Robot Vacuum Cleaner, including the dustbin, side brushes, HEPA and primary filters, remote control, and a small cleaning brush.

Produto acimaview

Familiarize-se com os principais componentes do seu robô aspirador.

Aspirador de pó robô

• Main Body: Houses the motor, dustbin, and control electronics.
• Side Brushes: Sweep debris into the vacuum's path.
• Driving Wheels: Allow the robot to move across various surfaces.
• Universal Wheel: Provides directional movement.
• Dustbin: Collects dirt and debris.
• Control Panel/LCD Display: Shows status and allows manual operation.
• Charging Contacts: Connects with the charging base for power.
• Anti-Drop Sensors: Detects edges and stairs.
• Anti-Collision Sensors: Detects obstacles to prevent bumping.

Base de carregamento

• Charging Contacts: Connect with the robot's charging contacts.
• Power Indicator: Shows charging status.
• Power Port: Connects to the power adapter.

Configurar

1. Instalação das escovas laterais

Align the side brushes with the corresponding posts on the bottom of the robot and press firmly until they click into place.

2. Positioning the Charging Base

Place the charging base against a wall in an open, uncluttered area. Ensure there is at least 1 meter (3 feet) of clear space on both sides and 2 meters (6 feet) in front of the charging base. Plug the power adapter into the charging base and then into a wall outlet.

3. Carregamento inicial

Place the robot vacuum onto the charging base, ensuring the charging contacts on the robot align with those on the base. The robot will begin charging automatically. For first-time use, charge the robot for approximately 5 hours until fully charged. A full charge provides up to 1.5 hours (90 minutes) of cleaning time.

Image: The Ariete 2718 Xclean Robot Vacuum Cleaner docked on its charging base, which is connected to a power outlet, indicating the charging process.

4. Preparando a área de limpeza

Before starting a cleaning cycle, remove any obstacles such as power cords, small rugs, toys, or other items that could entangle the robot or obstruct its path. The robot can navigate over low-pile carpets and hard floors.

Operando o Robô

Ligar/desligar

To power on the robot, press the main power switch located on the side of the unit. The LCD display will illuminate. To power off, press the switch again.

Iniciando um ciclo de limpeza

Press the 'CLEAN' button on the robot's control panel or the remote control to start an automatic cleaning cycle. The robot will begin cleaning and select the most appropriate mode for the area.

Image: A user's hand pressing the 'CLEAN' button on the top panel of the Ariete 2718 Xclean Robot Vacuum Cleaner to initiate a cleaning cycle.

Modos de limpeza

The Ariete 2718 Xclean offers 6 cleaning modes, selectable via the remote control or the robot's control panel:

• Modo Automático: The robot cleans randomly, adjusting its path based on obstacles and room layout.
• Corners Mode: The robot focuses on cleaning along walls and in corners.
• Modo de programação: Allows you to set a delayed start time for cleaning.
• Along the Wall Mode: The robot follows walls to ensure edge-to-edge cleaning.
• Modo Destaque: O robô limpa uma área concentrada em um padrão espiral, ideal para locais muito sujos.

Image: The Ariete 2718 Xclean Robot Vacuum Cleaner actively cleaning a tiled floor in a living space, demonstrating its ability to navigate around furniture.

Usando o controle remoto

The remote control allows you to manually direct the robot, select cleaning modes, and initiate or pause cleaning cycles from a distance. Refer to the remote control diagram for button functions.

Delayed Start / Programming

To program a delayed start, use the 'PLAN' button on the robot or the remote control. You can set the robot to start cleaning after a specified number of hours. The robot does not have a real-time clock for daily scheduling, but rather a timer for delayed activation.

Automatic Return to Charging Base

When the battery level is low, the robot will automatically return to its charging base to recharge. Ensure the charging base is accessible and unobstructed.

Manutenção

A manutenção regular garante o desempenho ideal e prolonga a vida útil do seu robô aspirador.

1. Esvaziando a lata de lixo

The dustbin has a capacity of 300 ml and should be emptied after each cleaning cycle or when full. To empty:

1. Pressione o botão de liberação do recipiente de lixo e puxe-o para fora.
2. Abra a tampa da lixeira e descarte os detritos coletados.
3. Feche a tampa e insira novamente o compartimento de pó no robô até ouvir um clique.

Image: A hand demonstrating the removal of the dustbin from the Ariete 2718 Xclean Robot Vacuum Cleaner for emptying or cleaning.

2. Limpeza de filtros

The robot uses a primary filter and a HEPA filter. These should be cleaned regularly to maintain suction power.

• Remova o caixote do lixo.
• Take out the primary filter and HEPA filter.
• Tap the filters gently to remove dust. Do not wash the HEPA filter with water. The primary filter can be rinsed with water if heavily soiled, but ensure it is completely dry before reinstallation.
• Reinstale os filtros e o recipiente de pó.

3. Limpeza das escovas laterais

Periodically check the side brushes for tangled hair or debris. Remove any obstructions by hand or using the provided cleaning brush. If brushes are worn, replace them with new ones.

4. Sensores de limpeza

Wipe the anti-drop sensors (located on the bottom of the robot) and anti-collision sensors (located on the front bumper) with a clean, dry cloth to ensure they function correctly.

Image: The Ariete 2718 Xclean Robot Vacuum Cleaner approaching a staircase, illustrating the function of its anti-fall sensors to prevent accidental drops.

5. Cuidados com a bateria

To prolong battery life, ensure the robot is regularly charged. If storing the robot for an extended period, fully charge it and then power it off. Recharge every 3 months to prevent deep discharge.

Solução de problemas

Se você encontrar problemas com seu robô aspirador, consulte os problemas e soluções comuns a seguir:

Especificações

Garantia e Suporte

For warranty information or technical support, please refer to the warranty card included with your product or visit the official Ariete website. Do not attempt to repair the appliance yourself, as this may void the warranty.