Maylit USB TV Bias Light for 40-60

Maylit RGB TV LED Backlight Strip (8.2ft for 40-60 inch TVs) Instruction Manual

1. Introdução

This manual provides instructions for the installation, operation, and maintenance of your Maylit RGB TV LED Backlight Strip. This USB-powered LED strip is designed to enhance your viewing experience by providing bias lighting for 40-60 inch televisions, reducing eye strain and adding ambient light to your room.

2. O que está na caixa

  • 8.2ft RGB LED Strip Light
  • USB Power Cable with Integrated Controller
  • IR Remote Control (Batteries included)
  • Fixing Buckles (for additional securing)
Contents of the Maylit TV LED Backlight kit, including LED strip, USB cable, remote control, and fixing buckles.

Image: Components included in the Maylit TV LED Backlight kit.

3. Especificações

Número do modeloUSB TV Bias Light for 40-60
Comprimento da tira de LED8.2 pés (2.5 metros)
Tamanho de TV recomendado40-60 polegadas
Fonte de energiaUSB 5V (TV USB port)
Tipo de luzRGB 5050 LEDs
Número de fontes de luz60
O quetage2.5 watts
Método de controleControle Remoto IR
Distância do controle remoto8-10 metros
Características especiais16 Colors, 4 Dynamic Modes, Dimmable, 180-degree foldable
Lighting Facts for the LED strip, showing brightness, energy cost, life, light appearance, and energy used.

Image: Detailed lighting facts for the LED strip.

4. Instruções de configuração

  1. Limpe a superfície: Ensure the back of your TV is clean and dry for optimal adhesive performance.
  2. Colocação do plano: Before removing the adhesive backing, temporarily position the LED strip around the back edges of your TV to determine the best layout. The strip is 180-degree foldable for corners.
  3. Fixe a tira de LED: Peel off the adhesive backing and carefully press the LED strip onto the back of your TV. Use the provided fixing buckles for additional security, especially at corners or if the adhesive needs reinforcement.
  4. Conecte a energia: Plug the USB connector into a 5V USB port on your TV. The product is powered by the TV's USB 5V interface. Ensure the USB interface current is 1A for proper operation.
  5. Luzes de teste: Once connected, the lights should turn on. Use the IR remote control to test different colors and modes.
Diagram showing how to install the LED strip on the back of a TV and connect it to a USB 2.0 5V 1A port.

Image: Visual guide for installing the LED strip and connecting to the TV's USB port.

A television displaying a vibrant landscape with the Maylit LED backlight creating a warm, yellow bias light effect on the wall behind it.

Imagem: Example of the LED backlight effect behind a TV.

Vídeo: Um excessoview of the Maylit TV LED Backlight, demonstrating its features and installation process for 40-60 inch TVs.

5. Instruções de operação

The Maylit RGB TV LED Backlight is controlled using the included IR remote control.

5.1 Funções de controle remoto

  • LIGADO/DESLIGADO: Ligue ou desligue as luzes.
  • Seleção de cores: Escolha entre 16 cores estáticas.
  • Ajuste de brilho: Increase or decrease the brightness of the selected color.
  • Modos dinâmicos: Select from 4 dynamic modes (Flash, Strobe, Fade, Smooth) for various lighting effects.
An image showing the IR remote control for the LED strip, highlighting its 16 color options, 8-level dimming, and 4 dynamic modes.

Image: The IR remote control with buttons for color selection, dimming, and dynamic modes.

A living room scene with a TV displaying colorful lighting effects, illustrating the Flash, Strobe, Fade, and Smooth dynamic modes of the LED strip.

Image: Demonstration of the Flash, Strobe, Fade, and Smooth dynamic lighting modes.

Video: A demonstration of the ambiance created by the TV LED lights, showcasing various color changes and effects.

6. Manutenção

  • Limpeza: Gently wipe the LED strip with a dry, soft cloth if dust accumulates. Do not use liquid cleaners.
  • Verificação adesiva: Periodically check the adhesive to ensure the strip remains securely attached. Reapply fixing buckles if necessary.
  • Armazenar: If removing the strip for extended periods, carefully peel it off and store it in a cool, dry place.

7. Solução De Problemas

  • As luzes não acendem:
    • Ensure the USB cable is securely plugged into a functional 5V USB port on your TV.
    • Verify the TV's USB port provides at least 1A current. Some older TV USB ports may not provide sufficient power.
    • Verifique a bateria do controle remoto.
  • Controle remoto não funciona:
    • Ensure there are no obstructions between the remote and the IR receiver on the USB cable.
    • Replace the remote control battery if necessary.
  • Lights flickering or inconsistent colors:
    • This may indicate insufficient power. Try plugging the USB into a different TV USB port or a dedicated 5V/1A (or higher) USB wall adapter.
    • Ensure the connections between the LED strip and the USB controller are secure.

8. Informações de segurança

  • Este produto foi projetado somente para uso interno.
  • Do not cut the LED strip unless explicitly instructed by the manufacturer, as this may damage the product and void the warranty.
  • Mantenha fora do alcance de crianças.
  • Avoid exposing the LED strip to excessive heat or moisture.

9. Garantia e Suporte

For warranty information or technical support, please refer to the product packaging or contact Maylit customer service directly. Keep your purchase receipt for warranty claims.