Lepro 11-inch 24W Flush Mount LED Ceiling Light User Manual

1. Informações de segurança

Leia atentamente todas as instruções antes da instalação e utilização. Guarde este manual para futuras consultas.

• Segurança elétrica: Always turn off the power at the circuit breaker before beginning any electrical work. Ensure proper grounding. If you are unsure about electrical installations, consult a qualified electrician.
• Somente para uso interno: This fixture is designed for indoor use.
• Resistência à água: The light fixture has an IP54 water-resistant and dustproof rating, making it suitable for damp locations like bathrooms and kitchens. However, it is not designed for direct water immersion.
• Não regulável: This LED ceiling light is não pode ser escurecido. Do not connect it to a dimmer switch, as this may damage the fixture.
• Aquecer: Embora as luzes LED produzam menos calor do que as lâmpadas tradicionais, assegure-se de que haja ventilação adequada ao redor da luminária.
• Crianças: Keep packaging materials away from children to avoid danger of suffocation.

2. Produto acabadoview

The Lepro 11-inch Flush Mount LED Ceiling Light provides efficient and bright illumination for various indoor spaces. Its slim design integrates seamlessly with modern interiors.

• Modelo: PR1500035-WW
• Tamanho: 11 inches (28 cm) diameter, 1.97 inches (5 cm) height.
• Poder: 24 Watts
• Brilho: 2400 Lúmens
• Temperatura de cor: 3000 Kelvin (Branco Quente Suave)
• Resistência à água: IP54 (à prova d'água e à prova de poeira)
• Vida útil: Mais de 20,000 horas
• Material: Plástico
• IRC: >80 (Color Rendering Index)
• Equivalente: Approximately 200W incandescent equivalent.
• Eficiência Energética: Saves up to 88% on energy compared to traditional lighting.

Figure 2.1: The Lepro 11-inch LED Ceiling Light providing warm and cozy illumination in a living room setting.

Figure 2.2: The ceiling light illuminating a modern kitchen, showcasing its broad light distribution.

Figure 2.3: The IP54 waterproof design makes this light suitable for bathroom environments.

Figure 2.4: The 24W LED light offers significant energy savings compared to two 100W incandescent bulbs.

Figure 2.5: Product dimensions showing 11-inch diameter and 1.97-inch height, ideal for low ceilings.

3. Guia de instalação

Follow these steps for safe and proper installation of your Lepro LED Ceiling Light. Ensure power is off before starting.

1. Desligue a energia: Localize o disjuntor que controla a luminária e desligue a energia. Verifique se a energia está realmente desligada usando um multímetro.tage testador.
2. Remove Mounting Bracket: Gently pull the spring tabs on the light fixture and remove the mounting bracket from the back of the lamp corpo.
3. Measure Hole Spacing: Use the removed mounting bracket to measure the appropriate hole spacing for your ceiling type. The bracket supports a minimum distance of 2.7 inches and a maximum distance of 4 inches for mounting holes.
4. Instale o suporte de montagem:
   • Para teto de madeira: Use the provided screws to directly fix the mounting bracket to the wooden ceiling.
   • For Cement Ceiling: Drill two holes at the measured spacing, insert the plastic anchors, then fix the mounting bracket with screws.
   • For Junction Box: Align the mounting bracket with the existing holes on your junction box and secure it with the provided screws.
5. Preparar a fiação: Open the waterproof wiring compartment on the light fixture.
6. Fios de conexão: Insert the household electrical wires into the electrical connections labeled 'N' (Neutral) and 'L' (Live) on the fixture. Ensure a secure connection.
7. Fiação segura: Straighten out the wires, place the rubber sealant into position, and close the wiring compartment securely.
8. Monte o Lamp: Align the light fixture with the installed mounting bracket. Pull the lamp's spring tabs and latch it onto the bracket, pushing the light firmly against the ceiling until it clicks into place.
9. Restaurar energia: Ligue novamente a energia no disjuntor.

Figure 3.1: Visual guide for installing the ceiling light, showing bracket removal, wire connection, and final mounting.

4. Instruções de operação

This Lepro LED Ceiling Light is designed for simple operation.

• Ligar/desligar: Use a standard wall switch to turn the light fixture on or off.
• Não regulável: As noted in the safety information, this fixture is not dimmable. It will operate at full brightness when switched on.

5. Manutenção

The Lepro LED Ceiling Light requires minimal maintenance due to its integrated LED design and durable construction.

• Limpeza: Certifique-se de que a energia esteja desligada antes de limpar. Limpe a luminária com um pano macio, seco ou levemente úmido.amp pano. Não use produtos químicos agressivos ou produtos de limpeza abrasivos.
• Sem necessidade de substituição da lâmpada: The LED lights are integrated and designed to last over 20,000 hours, eliminating the need for bulb replacement.
• Inspeção: Periodically check the fixture for any signs of damage or loose connections. If any issues are found, turn off the power and consult a qualified professional.

6. Solução De Problemas

If you encounter issues with your Lepro LED Ceiling Light, refer to the following common troubleshooting steps:

7. Especificações

8. Garantia e Suporte

This Lepro LED Ceiling Light comes with a Garantia de 2 ano do fabricante.

For further assistance, product information, or to explore other Lepro products, please visit the official Lepro Store:

Visit the Lepro Store