Introdução
The OptiMATE 7 Ampmatic TM-255 is an advanced, fully automatic 12V battery charger and maintainer designed for various lead-acid battery types, including AGM, GEL, and STD. It features a 9-step charging program to optimize battery performance and extend battery life. This manual provides essential information for the safe and effective use of your OptiMATE 7 Ampmatic charger.
Principais características:
- Battery Saving Capability: Recovers neglected 12V lead-acid batteries from as low as 0.5 Volts.
- AmpControle de carga automática: Automatically adjusts charging current (3 to 400Ah) to suit the battery size and condition for efficient charging.
- Volume da Célulatage Balanceamento: Prepares new batteries for initial use and optimizes overall battery performance.
- Operação automática: Connect and forget functionality with continuous monitoring and maintenance.
- Maior duração da bateria: Provides 24/7 protection against discharge and maintains optimal battery health.
- Aplicação versátil: Suitable for motorcycles, cars, trucks, marine craft, and RVs.
- Design durável: Fully sealed case offers protection against spills and light rain.
Instruções importantes de segurança
Leia e compreenda todas as instruções de segurança antes de usar o carregador. O não cumprimento dessas instruções pode resultar em choque elétrico, incêndio ou ferimentos graves.
- Ventilação: Always operate the charger in a well-ventilated area. Batteries can produce explosive gases.
- Proteção para os olhos e o rosto: Wear appropriate eye and face protection when working near batteries.
- É proibido fumar/proibir faíscas: Do not smoke or allow sparks or flames in the vicinity of the battery or charger.
- Disconnect AC First: Always disconnect the AC power cord from the outlet before connecting or disconnecting the DC output leads to/from the battery.
- Conexão adequada: Conecte o positivo (vermelho) clamp to the positive (+) battery terminal and the negative (black) clamp to the negative (-) battery terminal or vehicle chassis away from the battery.
- Uso interno: Este carregador foi projetado para uso interno. Não o exponha à chuva ou umidade excessiva.
- Crianças: Mantenha o carregador e a bateria fora do alcance das crianças.
- Damaged Charger: Do not operate the charger if it has been dropped, damaged, or shows any signs of malfunction. Contact Tecmate support.
Conteúdo da embalagem
Verifique se todos os itens estão presentes na embalagem:
- OptiMATE7 Ampmatic Battery Charger (Model TM-255)
- Battery clip set (for temporary connection)
- Fused ring terminal set (for permanent connection)
- Manual de Instruções (este documento)
Image: OptiMATE 7 Ampmatic TM-255 Battery Charger with included battery clips and ring terminals.
Configuração e conexão
- Prepare a bateria: Ensure the battery terminals are clean and free of corrosion. If it's a serviceable battery, check fluid levels and top up with distilled water if necessary (do not overfill).
- Selecione o método de conexão:
- Battery Clips: For temporary connection. Ensure a secure connection to the battery terminals.
- Terminais de anel: For permanent connection. Attach the ring terminals to the battery posts and route the cable away from moving parts.
- Conectar à bateria:
- Conecte o VERMELHO (+) charger lead to the POSITIVO (+) terminal da bateria.
- Conecte o PRETO (-) charger lead to the NEGATIVO (-) battery terminal. If charging a battery installed in a vehicle, connect the black lead to the vehicle chassis away from the battery and fuel line.
- Conecte à energia CA: Plug the charger's AC power cord into a standard wall outlet (100-240V AC). The charger will automatically begin its diagnostic and charging process.
Image: Illustration of connecting the OptiMATE 7 Ampmatic charger to a 12V battery using battery clips.
Instruções de operação
The OptiMATE 7 Ampmatic operates automatically through a 9-step program. Once connected to the battery and AC power, it will initiate the charging process.
9-Step Charging Program Overview:
- Step 1: Program Selection: Automatic selection for 12V batteries.
- Step 2: Save (0.5V): Alto voltage desulphation mode for severely neglected batteries.
- Step 3: Save (1.5V): Baixo voltage desulphation mode.
- Step 4: Save (2V): Pulse desulphation mode.
- Etapa 5: Ampmatic Charge: Bulk charge phase, current adjusted based on battery condition.
- Step 6: Absorption: Vol constantetage charge to ensure full charge.
- Step 7: Cell Voltage Balanceamento: Optimizes individual cell voltage for new or deeply discharged batteries.
- Step 8: Test: Checks battery charge retention and overall health.
- Step 9: OptiMATE Maintenance: Float charge mode to maintain the battery at optimal voltage sem cobrar a mais.
The charger's LEDs will indicate the current charging stage and battery status. Refer to the charger's label for specific LED interpretations.
Maintenance and Long-Term Storage
The OptiMATE 7 Ampmatic is designed for long-term connection to maintain batteries. For optimal battery life and charger performance:
- Conexão contínua: The charger can remain connected to the battery indefinitely, providing intelligent maintenance charging.
- Limpeza da bateria: Periodically inspect battery terminals for corrosion and clean them if necessary.
- Fluid Levels (for serviceable batteries): For batteries with removable caps, check electrolyte levels monthly during long-term maintenance and top up with distilled water if needed.
- Charger Condition: Keep the charger clean and dry. Avoid covering it during operation to ensure proper ventilation.
Solução de problemas
| Problema | Possível causa | Solução |
|---|---|---|
| Charger not turning on / No LEDs active. | No AC power; poor battery connection; severely discharged battery (below 0.5V). | Check AC outlet and power cord. Ensure secure connection to battery terminals. If battery is below 0.5V, it may be unrecoverable. |
| Charger stays in "Save" mode for extended periods. | Battery is deeply sulphated or damaged. | Allow the charger to continue. If it doesn't progress after 24 hours, the battery may be beyond recovery. |
| Battery not reaching full charge. | Incorrect battery type selected (not applicable for Ampmatic); internal battery fault; poor connection. | Ensure connections are secure. Have the battery professionally tested for internal faults. |
| Charger indicates fault (specific LED pattern). | Short circuit; reverse polarity; internal charger fault. | Disconnect immediately. Check for short circuits or reverse polarity. If problem persists, contact Tecmate support. |
For further assistance, please refer to the official Tecmate website ou entre em contato com o suporte ao cliente.
Especificações técnicas
| Modelo | TM-255 |
| Marca | Tecmate |
| Vol de entradatage | 240 Volts AC (compatible with 100-240V AC) |
| Volume de saídatage | 12 Volts CC |
| Classificação atual | 10 Amps |
| Capacidade da bateria | 3 to 400 Ah (Ampmatic control) |
| Tipos de bateria | 12V Lead-Acid (AGM, GEL, STD, Deep Cycle, Starter) |
| Etapas de carregamento | 9-step automatic program |
| Peso do item | 3.23 libras (aproximadamente 1.46 kg) |
| Dimensões da embalagem | 12.83 x 8.27 x 3.35 polegadas (aproximadamente 32.6 x 21 x 8.5 cm) |
| Classificação do gabinete | Fully sealed case (protection against spillage and light rain) |
Garantia e Suporte
The OptiMATE 7 Ampmatic TM-255 is manufactured by Tecmate. For warranty information, technical support, or service inquiries, please visit the official Tecmate website ou entre em contato com o departamento de atendimento ao cliente.
Fabricante: Tecmate
Website: www.tecmate.com
Guarde o comprovante de compra para reclamações de garantia.