1. Introdução
Thank you for choosing the Zerone LP-838 Small Power Amplifier. This manual provides essential information for the safe and efficient operation of your device. Please read these instructions thoroughly before use and retain them for future reference.
2. Produto acabadoview
2.1 Principais Características
- Design compacto e portátil.
- RCA and 3.5mm audio input compatibility.
- High-power audio amplifier chip for 2.1 channel output.
- Adjustable Treble, Bass, and Volume controls.
- Durable all-aluminum alloy shell for electromagnetic interference reduction.
2.2 Identificação do Componente
Figure 1: Front Panel Controls and Inputs
This image displays the front panel of the LP-838 amplifier. From left to right, it features a power switch, a bass volume knob, a 3.5mm MP3 input jack, and three rotary knobs for Treble, Bass, and Master Volume control. The unit also supports RCA audio input, as indicated by the text overlay.
Figura 2: Conexões do painel traseiro
This image shows the rear panel of the LP-838 amplifier. On the left are the RCA audio input jacks (red for right, white for left). In the center are the spring-clip speaker terminals for connecting left and right speakers. On the right is the DC 12V/3A power input jack and a 'Q.C. PASSED' stamp, indicating quality control.
Painel frontal:
- Chave POWER: Alterna o amplifier on / off.
- BASS VOLUME Knob: Ajusta o nível de graves da saída de áudio.
- Entrada MP3: Entrada de 3.5 mm para conectar dispositivos de áudio portáteis.
- Botão TREBLE: Ajusta a resposta de alta frequência.
- Botão BASS: Ajusta a resposta de baixa frequência.
- Botão VOLUME: Controla o volume geral de saída.
Painel traseiro:
- AUDIO INPUT (RCA): Red and white RCA jacks for connecting audio sources (e.g., DVD players, computers).
- SPEAKER OUTPUTS (+R -R +L -L): Spring-clip terminals for connecting passive speakers. Ensure correct polarity (+ to + and - to -).
- Entrada CC 12V/3A: Power input jack for connecting the external power adapter (not included).
3. Configuração
- Conectar alto-falantes: Connect your passive speakers to the SPEAKER OUTPUT terminals on the rear panel. Ensure the positive (+) terminal of the amplifier connects to the positive (+) terminal of the speaker, and the negative (-) terminal of the amplifier connects to the negative (-) terminal of the speaker. The amplifier supports speakers with an impedance of 4-8 Ohms.
- Conectar fonte de áudio:
- For RCA input: Connect your audio source (e.g., CD player, TV, computer) to the RCA AUDIO INPUT jacks on the rear panel using an RCA cable.
- For 3.5mm input: Connect your portable audio device (e.g., smartphone, MP3 player) to the MP3 input jack on the front panel using a 3.5mm audio cable.
- Conecte a energia: Connect a compatible DC 12V/3A power adapter (not included) to the DC 12V/3A input jack on the rear panel. Plug the power adapter into a wall outlet.
Important: Ensure all connections are secure before powering on the ampmais vivo.
4. Instruções de operação
- Ligar: Flip the POWER switch on the front panel to the 'ON' position. The power indicator light will illuminate.
- Selecione Entrada: O amplifier automatically uses the active input. If both RCA and 3.5mm inputs are connected, the 3.5mm input may take precedence.
- Ajustar volume: Start with the VOLUME knob set to a low level. Begin playing audio from your source, then slowly increase the VOLUME knob to your desired listening level.
- Ajustar tom: Use the TREBLE and BASS knobs to fine-tune the high and low frequencies according to your preference. The BASS VOLUME knob provides additional control over the bass output.
- Desligar: When finished, turn the VOLUME knob down to its minimum setting, then flip the POWER switch to the 'OFF' position.
5. Manutenção
- Limpeza: Use um pano macio e seco para limpar a parte externa do ampAmplificador. Não utilize produtos de limpeza líquidos ou solventes.
- Ventilação: Garantir o amplifier is placed in a well-ventilated area to prevent overheating. Do not block the ventilation slots.
- Armazenar: When not in use for extended periods, disconnect the power adapter and store the amplifier in a cool, dry place.
6. Solução De Problemas
| Problema | Possível causa | Solução |
|---|---|---|
| Sem energia | Adaptador de energia não conectado ou com defeito; interruptor de energia desligado. | Ensure power adapter is securely connected and functional. Flip power switch to ON. |
| Nenhuma saída de som | Incorrect audio input connection; speaker wires loose or incorrect polarity; volume too low; audio source issue. | Check audio input cables and connections. Verify speaker wire connections and polarity. Increase volume. Test audio source with another device. |
| Som distorcido | Volume too high; incorrect tone settings; faulty audio source or cable. | Reduce volume. Adjust Treble and Bass knobs. Test with a different audio source or cable. |
| Zumbido ou ruído de zumbido | Ground loop issue; interference from other electronics; faulty cables. | Ensure all components are properly grounded. Move amplifier away from other electronic devices. Try different audio cables. |
7. Especificações
- Marca: Zerone
- Número do modelo: Zeroneq8ae3d902g-02 (LP-838)
- Volumetage: 14.4 Volts (em operação)
- Número de canais: 2
- Impedância do alto-falante: 4-8 Ohms
- Tipo de montagem: Montagem em superfície
- Peso do item: 7.8 onças
- ASIN: B07DM4QJGX
- Código UPC: 763741184919
- Data da primeira disponibilidade: 4 de julho de 2019
8. Informações de garantia
For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your retailer. Warranty coverage typically includes defects in materials and workmanship under normal use.
9. Suporte
If you encounter issues that cannot be resolved using the troubleshooting guide, please contact the retailer or manufacturer for assistance. Provide your product model number (LP-838) and a detailed description of the problem when seeking support.