ECOELER 6-inch Dimmable LED Disk Light Instruction Manual

1. About Your ECOELER LED Disk Light

The ECOELER 6-inch Dimmable LED Disk Light is a high-quality, energy-efficient lighting solution designed for various indoor applications. This fixture provides bright, warm white illumination and features a low-profile design for seamless integration into your ceiling.

• Alta qualidade: Features a 7.3-inch round metal light cover for corrosion protection and rust prevention. Equipped with high-quality LED chips, it delivers 1000 lumens at 16.5 watts, ensuring well-balanced light with no flickering and an estimated lifespan of 50,000 hours.
• Smooth Dimmable: Offers a full range of seamless dimming from 5% to 100%, allowing precise control over brightness for any situation, from a soft night glow to bright task lighting.
• Baixo Profile Projeto: The ultra-thin 0.9-inch design provides a sleek look, ideal for spaces with low ceilings or for achieving a modern aesthetic.
• Amplas aplicações: Adequado para damp locations, making it perfect for entrances, living rooms, bedrooms, kitchens, dens, and covered outdoor areas.
• Segurança Assegurada: ETL and FCC listed, ensuring compliance with safety and quality standards.

2. Conteúdo da embalagem

Verifique se todos os componentes estão presentes antes de iniciar a instalação:

• LED Disk Light Fixture (4 units)
• E26 Adapter and Spring Clips
• Installation Screws (Short and Long)
• Porcas de Arame
• Manual de instruções

3. Informações de segurança

Please read and understand all instructions before installing or operating this product. Failure to do so may lead to electric shock, fire, or other hazards that could cause injury or property damage.

• AVISO: Risco de choque elétrico. Desconecte a energia no fusível ou disjuntor antes de instalar ou fazer manutenção.
• AVISO: Risk of fire. Use only in circuits rated for 120V AC.
• Este produto deve ser instalado de acordo com o código de instalação aplicável por uma pessoa familiarizada com a construção e operação do produto e os riscos envolvidos.
• Certifique-se de que todas as conexões elétricas estejam seguras e corretas.
• Do not modify the fixture or use it for any purpose other than its intended use.
• Não manuseie o aparelho com as mãos molhadas.
• Adequado para damp localizações.

4. Instruções de instalação

The ECOELER LED Disk Light can be installed into either a standard junction box or a recessed can (5-inch or 6-inch).

4.1. Junction Box Installation

1. Desligue a alimentação: Certifique-se de que a energia esteja desligada no disjuntor antes de começar.
2. Remova a lente: Gently twist the light lens counter-clockwise to remove it from the fixture base.
3. Conecte a fiação: Connect the supply wires from the junction box to the fixture wires using the provided wire nuts (black to black, white to white, ground to ground).
4. Attach fixture to junction box: Align the fixture base with the junction box and secure it using the provided screws.
5. Reattach lens: Twist the lens clockwise onto the fixture base until secure.
6. Restaure a energia: Ligue novamente o disjuntor.

4.2. Recessed Can Installation

1. Desligue a alimentação: Certifique-se de que a energia esteja desligada no disjuntor antes de começar.
2. Remova a lente: Gently twist the light lens counter-clockwise to remove it from the fixture base.
3. Install E26 adapter: Enrosque o adaptador E26 no soquete embutido existente.
4. Conecte a fiação: Connect the fixture wires to the E26 adapter wires using the provided wire nuts (black to black, white to white).
5. Install spring clips: Attach the spring clips to the designated slots on the fixture base.
6. Push disk into can: Carefully push the LED disk light into the recessed can until the spring clips hold it securely in place, flush with the ceiling.
7. Reattach lens: Twist the lens clockwise onto the fixture base until secure.
8. Restaure a energia: Ligue novamente o disjuntor.

5. Instruções de operação

The ECOELER LED Disk Light is designed for simple operation and offers smooth dimming capabilities.

5.1. Ligar/Desligar

Acione a luz usando um interruptor de parede padrão conectado ao circuito da luminária.

5.2. Função de escurecimento

This fixture is compatible with most standard LED dimmers, allowing for smooth brightness adjustment from 5% to 100%. To dim the light, use a compatible dimmer switch (not included) installed in your electrical system.

6. Manutenção

The ECOELER LED Disk Light requires minimal maintenance.

• Limpeza: Para limpar a luminária, certifique-se de que a energia esteja desligada. Use um pano macio, seco ou levemente úmido.amp pano. Não utilize produtos químicos agressivos ou abrasivos, pois podem danificar o acabamento ou os componentes elétricos.
• Nenhuma peça que possa ser reparada pelo usuário: The LED light source is integrated and not user-replaceable. Do not attempt to disassemble the fixture.

7. Solução De Problemas

If you experience issues with your ECOELER LED Disk Light, refer to the following common problems and solutions:

If problems persist, contact ECOELER customer support for assistance.

8. Especificações

9. Garantia e Suporte

ECOELER products are designed for quality and durability. This product comes with a limited warranty.

• Garantia: Refer to the product packaging or ECOELER's official webConsulte o site para obter os termos e condições específicos da garantia.
• Suporte ao cliente: If you encounter any problems during use or have questions regarding installation or operation, please contact ECOELER customer service. We aim to provide a reply within 24 hours.