Introdução
This manual provides essential information for the safe and efficient operation of your Renogy 2000W 12V Pure Sine Wave Power Inverter. This device converts 12V DC battery power into 230V AC household power, suitable for a wide range of electronic devices and appliances. Please read this manual thoroughly before installation and use, and retain it for future reference.
Image: The Renogy 2000W Pure Sine Wave Power Inverter, a black rectangular unit with blue accents, shown in a typical outdoor setting.
Instruções de segurança
- Segurança elétrica: Always ensure proper grounding. Do not expose the inverter to water, rain, or excessive moisture. Operate in a well-ventilated area.
- Conexão da bateria: Connect the inverter directly to a 12V deep cycle battery. Ensure correct polarity (positive to positive, negative to negative). Incorrect connections can damage the inverter and battery.
- Capacidade de carga: Do not exceed the inverter's continuous power rating of 2000W or peak power rating of 4000W. Overloading can cause damage and pose a fire hazard.
- Ventilação: Assegure uma circulação de ar adequada ao redor do inversor para evitar o superaquecimento. Não obstrua as aberturas de ventilação.
- Crianças e animais de estimação: Mantenha o inversor fora do alcance de crianças e animais de estimação.
- Manutenção: Disconnect all power before performing any maintenance or cleaning.
Conteúdo da embalagem
Verifique se todos os itens estão presentes na embalagem:
- Renogy 2000W 12V 220V Pure Sine Wave Inverter x 1
- 20 mm² Cable x 1
- Remote Control (cable length: approximately 3m) x 1
Image: A close-up of a high-quality copper cable, indicating the type of accessory included for optimal performance.
Características do produto
- Powerful DC-AC Conversion: Provides 2000W continuous power (4000W peak) from 12V DC to 230V AC with 90% conversion efficiency.
- Tecnologia de Onda Senoidal Pura: Delivers stable, clean power comparable to grid electricity, protecting sensitive electronics and extending their lifespan.
- Sistema de proteção abrangente: Features LED indicators for under-voltage, sobre-voltage, over-temperature, overload, and short-circuit protection. Includes a cooling fan and internal DC fuse for enhanced safety.
- Integrated Grid Priority Circuit: Ensures continuous 230V power by automatically switching between shore power and inverter power.
- Ampla faixa de aplicação: Suitable for PCs, laptops, tablets, medical devices, and various household appliances.
- Design amigável: Equipped with 2 AC outlets and a remote control for convenient operation.
- Construção durável: Metal robusto casing protects against impacts. High-speed fans maintain optimal operating temperature.
Imagem: Frente view of the Renogy 2000W Inverter, highlighting the two AC outlets and the main power switch.
Image: The Renogy 2000W Inverter displaying icons for its six electronic protection features, including over-temperature, short circuit, and overload protection.
Imagem: Traseira view of the inverter, showing the dual cooling fans designed for powerful heat dissipation and efficient system operation.
Configurar
Localização da instalação
Install the inverter in a dry, cool, and well-ventilated area. Avoid direct sunlight, heat sources, and moisture. Ensure sufficient clearance around the unit for proper airflow.
Diagrama de fiação
Follow the diagram below for correct connection of the inverter to your solar power system. Ensure all connections are secure and properly insulated.
Image: A detailed wiring diagram illustrating the connections between solar panels, charge controller, battery, inverter, and various DC/AC loads in a solar power system.
Conectando à bateria
- Certifique-se de que o inversor esteja DESLIGADO.
- Connect the supplied 20 mm² cable to the DC input terminals on the rear of the inverter. Ensure positive (+) is connected to positive and negative (-) to negative.
- Connect the other end of the cables to your 12V deep cycle battery. Use appropriate fuses or circuit breakers as recommended for your system.
- Tighten all connections securely to prevent loose contacts and arcing.
Conectando cargas CA
Plug your AC appliances directly into the 230V AC outlets on the front of the inverter. Ensure the total power consumption of your appliances does not exceed 2000W.
Instruções de operação
Ligar/desligar
- Ensure all DC and AC connections are correctly made.
- Press the main power switch on the front of the inverter to the 'ON' position. The indicator lights will illuminate.
- To power off, switch the main power switch to the 'OFF' position.
Usando o controle remoto
The included remote control allows you to power the inverter on or off from a distance, which is convenient when the inverter is installed in an inaccessible location.
Image: The remote control unit for the Renogy inverter, featuring an on/off switch and indicator lights, mounted on a wooden surface.
- Connect the remote control cable to the designated port on the inverter.
- Use the switch on the remote control to turn the inverter ON or OFF.
Luzes indicadoras
The inverter features LED indicators that provide status information and alert you to potential issues:
- LED verde: Indica operação normal.
- LED vermelho: Indicates a fault or protection mode (e.g., overload, over-temperature, low voltage). Refer to the Troubleshooting section for details.
Manutenção
- Limpeza: Limpe periodicamente a parte externa do inversor com um pano seco. Certifique-se de que as aberturas de ventilação estejam livres de poeira e detritos. Não utilize produtos de limpeza líquidos.
- Verificação de conexão: Regularly inspect all DC and AC connections for tightness and corrosion. Tighten any loose connections.
- Saúde da bateria: Ensure your battery is well-maintained and charged to prolong its lifespan and the inverter's performance.
Solução de problemas
| Problema | Possível causa | Solução |
|---|---|---|
| O inversor não liga. | Conexão da bateria solta; Volume da bateria baixotage; Fusível queimado | Check battery connections; Charge battery; Replace fuse (if applicable and safe to do so) |
| Sem saída CA | Overload; Over-temperature; Low/High input voltage | Reduce load; Allow inverter to cool; Check battery voltage |
| O indicador LED vermelho está aceso. | Overload; Over-temperature; Input voltage out of range; Short circuit | Identify and resolve the specific fault condition. Disconnect loads, check connections, allow cooling. |
| Ventilador não funciona | Normal operation (fan activates under load/temperature); Fan malfunction | Ensure inverter is under load or operating at higher temperatures. If no fan operation under load, contact support. |
Especificações
| Especificação | Valor |
|---|---|
| Marca | Renogy |
| Nome do modelo | R-INVT-PUH1-201235-DE/EU |
| Potência (contínua) | 2000 Watts |
| Potência de saída máxima | 4000 Watts |
| Vol de entradatage | 12 Volts (CC) |
| Volume de saídatage | 230 Volts (CA) |
| Forma de onda de saída | Pure Sine Wave |
| Freqüência | 50 Hz |
| Total de tomadas | 2 |
| Dimensões (C x L x A) | 48.2L x 22L x 9.2H cm |
| Peso do item | 4.8 quilos |
| Usos recomendados | Powering sensitive electronics during camping or outdoor activities, medical devices, household appliances during travel or off-grid living. |
| Certificações | ETL, CE, UKCA, RoHS, ECE R10 |
Garantia e Suporte
The Renogy 2000W 12V Pure Sine Wave Power Inverter comes with a Garantia de 2 ano covering materials and manufacturing defects.
For technical support, warranty claims, or any product-related inquiries, please contact Renogy customer service directly. If you encounter any issues, especially transport-related damage, please reach out via buyer message for assistance with replacement or partial refund options.
Please visit the official Renogy webPara obter as informações de contato mais recentes, consulte o site ou a documentação da sua compra.