DEVMO AMS1117-5.0 5V Step-Down Linear Voltage Regulator Module

1. Produto acabadoview

The DEVMO AMS1117-5.0 is a compact step-down linear voltage regulator module designed to convert a higher DC input voltage (6V to 12V) into a stable 5.0V DC output. This module is suitable for various electronic projects, including those compatible with Arduino platforms, where a regulated 5V power supply is required from a higher voltage fonte.

Os principais recursos incluem:

• Vol de entradatage Faixa: 6V to 12V DC.
• Volume de saídatage: Stable 5.0V DC.
• Corrente máxima de saída: Up to 800mA with a 6V input, decreasing to 200mA with a 12V input, limited by internal power dissipation.
• Conexão: Solderable pins for easy input and output connections.
• Indicador: A PCB-mounted LED illuminates when voltage is applied to the module, indicating power status.

2. Especificações

2.1. Especificações Eletricas

Note: The maximum output current is limited by the regulator's internal power dissipation and decreases as the input voltage increases. The module cannot provide 800mA output at all input voltage.

2.2. Especificações Físicas

3. Configuração e instalação

This module is designed for easy integration into electronic circuits. Proper connection of input and output terminals is crucial for safe and correct operation.

Figure 1: Two DEVMO AMS1117-5.0 modules with included pin headers. The modules feature solder pads for input and output connections.

3.1. Instruções de conexão

1. Identificar Terminais: The module has clearly marked solder pads for input and output. Typically, these are labeled '+' and '-' for input, and 'OUT' or '5V' for output. Refer to the module's silkscreen for exact markings.
2. Conexão de entrada: Connect your DC power source (6V to 12V) to the input terminals. Ensure correct polarity: positive (+) of the power source to the '+' terminal of the module, and negative (-) to the '-' terminal.
3. Conexão de saída: Connect your load (e.g., Arduino board, 5V sensor) to the output terminals. Ensure correct polarity: the 5V output from the module to the positive input of your load, and the ground of the module to the ground of your load.
4. De solda: Use appropriate soldering techniques to securely attach wires or pin headers to the module's pads. Ensure strong, clean solder joints to prevent intermittent connections.
5. Indicador de energia: Once power is applied to the input, the onboard LED should illuminate, indicating that the module is receiving power and attempting to regulate the voltage.

3.2. Precauções de segurança

• Always verify input and output polarities before applying power to prevent damage to the module or connected devices.
• Não exceda o vol máximo de entradatage de 12 V DC.
• Ensure the total current drawn by your load does not exceed the module's maximum output current capacity for the given input voltage. Exceeding this limit can lead to overheating and damage.
• Avoid short circuits on the output terminals.
• Handle the module by its edges to avoid touching components, especially after operation, as it may be warm.

4. Operação

The AMS1117-5.0 module operates as a linear voltage regulator. It dissipates excess input voltage as heat to maintain a stable 5.0V output. This means that the higher the input voltage and the higher the output current, the more heat the module will generate.

• Ligar: Aplicar volume CCtage within the 6V to 12V range to the input terminals. The onboard LED will light up.
• Volumetage Saída: The module will provide a regulated 5.0V DC at its output terminals.
• Limitação atual: Be mindful of the current limitations. For example, with a 12V input, the maximum stable output current is approximately 200mA. If your load requires more current, consider using a lower input voltage (closer to 6V) or an alternative power regulation method.
• Gerenciamento de calor: For continuous operation at higher input voltages and currents, ensure adequate ventilation around the module to dissipate heat.

5. Manutenção

The DEVMO AMS1117-5.0 module is a solid-state electronic component and generally requires minimal maintenance. However, following these guidelines can help ensure its longevity and reliable performance:

• Limpeza: Keep the module free from dust, dirt, and moisture. Use a soft, dry brush or compressed air to clean if necessary. Avoid using liquid cleaners.
• Condições ambientais: Operate the module within its specified temperature range. Avoid extreme heat, cold, or humidity.
• Inspeção física: Periodically inspect solder joints and connections for any signs of corrosion or damage.
• Armazenar: When not in use, store the module in an anti-static bag in a dry, cool environment.

6. Solução De Problemas

If you encounter issues with your DEVMO AMS1117-5.0 module, consider the following troubleshooting steps:

• Sem Volume de Saídatage / LED Off:
  • Verifique se o volume de entradatage is within the 6V to 12V range.
  • Verify input polarity. Incorrect polarity will prevent operation and may damage the module.
  • Inspect all connections for loose wires or poor solder joints.
  • Certifique-se de que a fonte de alimentação esteja funcionando corretamente.
• Volume de saídatage is Lower Than 5V:
  • Check if the load current exceeds the module's maximum capacity for the given input voltage. Reduce the load or use a lower input voltage.
  • Garantir o volume de entradatage is stable and not dropping under load.
  • The module might be overheating. Allow it to cool down and ensure proper ventilation.
• Superaquecimento do módulo:
  • This is common for linear regulators when the voltage difference between input and output is large, and the current draw is high.
  • Reduza o volume de entradatage if possible, or reduce the load current.
  • Assegure-se de que haja fluxo de ar adequado ao redor do módulo.
• Operação intermitente:
  • Check for cold solder joints or loose connections.
  • Certifique-se de que a fonte de alimentação seja estável e não apresente flutuações.

7. Garantia e Suporte

For warranty information, technical support, or further assistance with your DEVMO AMS1117-5.0 module, please refer to the seller's return policy or contact the DEVMO customer support directly through the platform where the product was purchased. Keep your purchase receipt or order details handy for faster service.

DEVMO is committed to providing quality electronic components. If you have any questions regarding the operation or integration of this module, do not hesitate to seek assistance.