Beghelli 19432 LED Emergência Lamp Manual do usuário

Introdução

This manual provides essential information for the safe and efficient use of your Beghelli 19432 LED Emergency Lamp. Please read this manual thoroughly before installation, operation, or maintenance to ensure proper functioning and to prevent damage or injury.

The Beghelli 19432 is a high-performance LED emergency lamp designed for reliable illumination during power outages or emergency situations. It features a robust polycarbonate construction and a powerful 1200 lumen LED light source with Li-Fe battery technology.

Informações de segurança

Always adhere to the following safety guidelines to prevent electric shock, fire, or injury:

• Certifique-se de que a fonte de alimentação esteja desconectada antes da instalação ou manutenção.
• A instalação deve ser realizada por um eletricista qualificado, de acordo com as normas elétricas locais.
• Não exponha o lamp to excessive moisture or extreme temperatures.
• Não tente abrir ou modificar o arquivo lamp housing, as this may void the warranty and pose a safety risk.
• Mantenha os materiais de embalagem longe das crianças.

Conteúdo da embalagem

Verifique se todos os componentes estão presentes e sem danos:

• Beghelli 19432 LED Emergência Lamp unidade
• Integrated Li-Fe Battery
• Acessórios de montagem (parafusos, buchas)
• Manual do usuário (este documento)

Configuração e instalação

The Beghelli 19432 emergency lamp is designed for wall mounting. Follow these steps for proper installation:

1. Escolha um local: Select a suitable location for installation, typically near an exit or in a common area, ensuring the light can illuminate the required path during an emergency. The lamp is designed for indoor use in commercial or emergency exit applications.
2. Prepare a superfície de montagem: Ensure the wall surface is clean, dry, and capable of supporting the lamppeso de.
3. Marque os pontos de perfuração: Use o lamp's mounting holes as a template to mark the drilling points on the wall.
4. Furos de perfuração: Drill holes at the marked points using an appropriate drill bit for the wall plugs.
5. Insira as buchas de parede: Insira as buchas fornecidas nos furos perfurados.
6. Monte o Lamp: Proteja o lamp to the wall using the provided screws. Ensure it is firmly attached.
7. Conecte a energia: Conecte o lamp to the main power supply according to the wiring diagram (refer to the diagram usually found inside the lamp's cover or on a separate sheet, not provided here). Ensure correct polarity and secure connections. The lamp is battery-operated but requires a constant power supply to keep the battery charged and for automatic operation.
8. Carga inicial: After installation, allow the lamp to charge for at least 24 hours before its first use to ensure the battery is fully charged.

Image: The Beghelli 19432 LED Emergency Lamp, featuring its sleek white polycarbonate housing and the transparent light diffuser, designed for efficient light distribution.

Instruções de operação

The Beghelli 19432 operates automatically:

• Operação normal: When connected to the main power supply, the lamp's battery will charge, and the lamp will remain off (or in standby mode, depending on configuration).
• Modo de emergência: In the event of a power failure, the lamp will automatically switch on, providing 1200 lumens of illumination from its internal Li-Fe battery.
• Retorno ao normal: Once main power is restored, the lamp will automatically switch off and begin recharging its battery.
• Test Button (if applicable): Some models may include a test button to manually check the emergency function. Press and hold the button to simulate a power outage and verify the lamp illuminates. Release the button to return to normal operation. (Note: Specific button location and function may vary; refer to product labeling if present.)

Manutenção

Regular maintenance ensures the longevity and reliability of your emergency lamp:

• Limpeza: Limpe o lampLimpe a parte externa com um pano macio e seco. Não utilize produtos de limpeza abrasivos ou solventes.
• Verificação da bateria: Perform a monthly functional test by simulating a power outage (e.g., by pressing the test button or temporarily disconnecting power) to ensure the battery holds a charge and the lamp illuminates for the specified duration.
• Annual Discharge Test: Annually, perform a full discharge test. Disconnect the main power supply and allow the lamp to operate until the battery is fully depleted. Then, reconnect power and allow it to recharge for 24-48 hours. This helps maintain battery health.
• Substituição da bateria: The integrated Li-Fe battery has a long lifespan but will eventually require replacement. This should only be performed by qualified personnel. Contact Beghelli support for authorized service.
• Lamp Substituição: The LED light source is designed for long-term use and is generally not user-replaceable. If the LEDs fail, the entire unit may need replacement.

Solução de problemas

Consulte a tabela abaixo para problemas comuns e suas soluções:

If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact Beghelli customer support.

Especificações

Garantia e Suporte

For warranty information, please refer to the documentation provided with your purchase or visit the official Beghelli website. Beghelli products are designed for durability and performance.

For technical support, service, or inquiries regarding replacement parts, please contact Beghelli customer service through their official channels. Contact information can typically be found on the Beghelli website ou na embalagem do produto.

Informações de Reciclagem: For information on recycling this product, particularly the lamp and battery components, please refer to local regulations and recycling guidelines. Specific information regarding lamp recycling and disposal of broken or damaged lamps can often be found on the manufacturer's website or through local waste management services.