Einhell AQUINNA 36/30 (Model 4180400)

Einhell AQUINNA 36/30 Cordless Garden Pump Instruction Manual

Model: AQUINNA 36/30 (4180400)

1. Introdução

The Einhell AQUINNA 36/30 Cordless Garden Pump is designed for efficient and environmentally friendly water transfer in your garden. It allows you to utilize rainwater, well water, or cistern water, contributing to water conservation and cost savings. This pump is part of the Power X-Change family, operating on two 18V Power X-Change batteries (not included). All batteries within the Power X-Change system are interchangeable with other tools in the range.

The pump features a two-level ECO switch for optimal performance, offering an energy-saving mode with reduced delivery pressure or full power mode. It boasts a maximum delivery height of 26 meters, a maximum suction height of 8 meters, and a maximum flow rate of 3,000 liters per hour. The suction connection is 42 mm (1 1/4" AG) and the pressure connection is 33.3 mm (R1 IG). For protection against frost, the pump includes a water filling screw and a water drain screw, allowing safe storage during colder seasons. Thermal protection safeguards the motor from overload. A practical carrying handle ensures easy transport to any location.

Einhell AQUINNA 36/30 Cordless Garden Pump, red and black, with hoses connected, ready for use.
Figure 1: Einhell AQUINNA 36/30 Cordless Garden Pump. This image shows the pump in its operational setup, highlighting its compact design and readiness for use in a garden environment.

2. Instruções de segurança

Leia e compreenda sempre todos os avisos de segurança, instruções, ilustrações e especificações fornecidas com esta ferramenta elétrica. O não cumprimento de todas as instruções listadas abaixo pode resultar em choque elétrico, incêndio e/ou ferimentos graves.

  • Segurança geral: Mantenha a área de trabalho limpa e bem iluminada. Não utilize ferramentas elétricas em atmosferas explosivas, como na presença de líquidos, gases ou poeira inflamáveis.
  • Segurança elétrica: Evite o contato do corpo com superfícies aterradas. Não exponha ferramentas elétricas à chuva ou umidade.
  • Segurança pessoal: Fique alerta, observe o que está fazendo e use o bom senso ao operar uma ferramenta elétrica. Não use uma ferramenta elétrica quando estiver cansado ou sob a influência de drogas, álcool ou medicamentos.
  • Uso e cuidados com a ferramenta elétrica: Não force a ferramenta elétrica. Use a ferramenta elétrica correta para a sua aplicação. Desconecte a bateria da ferramenta elétrica antes de fazer ajustes, trocar acessórios ou guardar ferramentas elétricas.
  • Uso e cuidados da ferramenta com bateria: Recarregue apenas com o carregador especificado pelo fabricante. Utilize ferramentas elétricas somente com baterias especificamente designadas para esse fim.
  • Serviço: Leve sua ferramenta elétrica para manutenção por um técnico qualificado, usando somente peças de reposição idênticas.

3. Produto acabadoview

The Einhell AQUINNA 36/30 Cordless Garden Pump is designed for portability and ease of use. Key components include:

  • Compartimento da bateria: Houses two 18V Power X-Change batteries.
  • Interruptor de controle: Allows selection between OFF, ECO, and BOOST modes.
  • Parafuso de enchimento de água: For priming the pump before operation.
  • Water Drain Screw: For emptying the pump to prevent frost damage.
  • Porta de sucção: Connects to the water source hose (42 mm / 1 1/4" AG).
  • Porta de Pressão: Connects to the irrigation hose (33.3 mm / R1 IG).
  • Alça de conforto: Para facilitar o transporte.
Close-up of the ergonomic comfort handle on the Einhell AQUINNA 36/30 pump.
Figure 2: Comfort Handle. The integrated handle provides a secure grip for easy portability of the pump.
Fechar-se view of the Einhell AQUINNA 36/30 pump's handle with the power and mode selection switch (BOOST, OFF, ECO).
Figure 3: Control Switch. This image details the power and mode selection switch, allowing users to choose between BOOST, OFF, and ECO settings.

4. Configuração

4.1. Instalação da bateria

  1. Ensure the pump is switched OFF.
  2. Abra a tampa do compartimento da bateria.
  3. Insert two fully charged 18V Power X-Change batteries into their respective slots. Ensure they click into place securely.
  4. Feche a tampa do compartimento da bateria.
Close-up of the Einhell AQUINNA 36/30 pump's battery compartment, showing two 18V Power X-Change batteries inserted.
Figure 4: Battery Insertion. This image shows the correct way to insert two 18V Power X-Change batteries into the pump's compartment.
A circular warning sticker indicating that batteries and charger are not included with the Einhell AQUINNA 36/30 pump.
Figure 5: Batteries and Charger Not Included. A reminder that these essential components are sold separately.

4.2. Hose Connections

  1. Connect the suction hose to the 42 mm (1 1/4" AG) suction port. Ensure a tight, airtight connection to prevent air leaks.
  2. Connect the irrigation hose to the 33.3 mm (R1 IG) pressure port.
  3. Place the end of the suction hose into your water source (rain barrel, well, cistern).
Close-up of the suction port (42 mm / 1 1/4 inch AG) on the Einhell AQUINNA 36/30 pump.
Figure 6: Suction Port. This image highlights the connection point for the suction hose, crucial for drawing water into the pump.

4.3. Preparando a bomba

Before first use or if the pump has run dry, it must be primed with water.

  1. Unscrew the water filling screw located on the top of the pump.
  2. Carefully fill the pump housing with water until it overflows.
  3. Replace and tighten the water filling screw securely.
Close-up of the water filling screw on the Einhell AQUINNA 36/30 pump.
Figure 7: Water Filling Screw. This image shows the location of the screw used to fill the pump with water for priming.

5. Operação

5.1. Iniciando a bomba

  1. Ensure batteries are installed, hoses are connected, and the pump is primed.
  2. Select the desired operating mode using the control switch:
    • Modo Eco: Provides prolonged battery runtime (up to 90% longer) with slightly reduced pressure for equivalent flow. Ideal for general watering tasks.
    • Modo BOOST: Delivers full power and maximum pressure for demanding applications.
  3. The pump will start operating.
Close-up of the ECO mode switch on the Einhell AQUINNA 36/30 pump's handle.
Figure 8: ECO Mode Switch. This image highlights the switch for selecting the energy-efficient ECO mode.

5.2. Stopping the Pump

To stop the pump, simply move the control switch to the OFF position.

5.3. Battery Runtime Overview

The following tables provide approximate battery runtimes for various Power X-Change battery capacities in both ECO and BOOST modes. Runtimes may vary based on application and environmental conditions.

Table showing estimated battery runtimes for Einhell Power X-Change batteries in ECO mode, ranging from 30 minutes (1.5 Ah) to 100 minutes (6.0 Ah).
Figure 9: ECO Mode Battery Runtimes. This table illustrates the extended operating times achievable in ECO mode with different battery capacities.
Table showing estimated battery runtimes for Einhell Power X-Change batteries in BOOST mode, ranging from 12 minutes (1.5 Ah) to 50 minutes (6.0 Ah).
Figure 10: BOOST Mode Battery Runtimes. This table provides estimated operating times when the pump is used at full power in BOOST mode.

6. Manutenção

6.1. Frost Protection and Storage

To prevent damage from freezing temperatures, it is crucial to completely drain the pump before storing it for the winter season.

  1. Switch the pump OFF and remove the batteries.
  2. Desconecte todas as mangueiras.
  3. Unscrew the water drain screw located at the bottom of the pump.
  4. Tilt the pump to ensure all water drains out.
  5. Once completely drained, replace and tighten the water drain screw.
  6. Guarde a bomba em local seco e livre de geadas.
Close-up of the drainage screw on the Einhell AQUINNA 36/30 pump, indicating frost protection feature.
Figure 11: Frost Protection. This image shows the water drain screw, essential for emptying the pump to prevent freezing damage.
A hand opening the drainage screw on the Einhell AQUINNA 36/30 pump to empty water for frost protection.
Figure 12: Draining the Pump. A visual guide to opening the drain screw to remove water from the pump for winter storage.

6.2. Limpeza Geral

Regularly clean the exterior of the pump with a damp cloth. Do not use harsh detergents or solvents. Ensure no debris obstructs the suction or pressure ports.

7. Solução De Problemas

This section addresses common issues you might encounter with your Einhell AQUINNA 36/30 pump.

ProblemaPossível causaSolução
A bomba não iniciaAs pilhas não estão carregadas ou estão inseridas incorretamente.Check battery charge level and ensure they are correctly inserted. Recharge if necessary.
A bomba funciona, mas não sai água.Pump not primed; air in suction line; suction hose not submerged; suction filter blocked.Prime the pump with water. Check all suction hose connections for airtightness. Ensure suction hose is fully submerged. Clean suction filter.
Low delivery pressureECO mode selected; partial blockage in hoses; pump not fully primed.Switch to BOOST mode. Check hoses for kinks or blockages. Re-prime the pump.
A bomba para inesperadamenteBatteries depleted; thermal overload protection activated.Replace/recharge batteries. Allow pump to cool down if thermal protection was triggered. Check for blockages or excessive load.

8. Especificações

  • Marca: Einhell
  • Número do modelo: 4180400
  • Dimensões do produto (C x L x A): 44.8 x 20.2 x 21.9 cm
  • Peso do item: 3.3 quilos
  • Material: Plástico
  • Cor: Vermelho; Preto
  • Fonte de energia: Battery Powered (36V, requires 2x 18V Power X-Change batteries)
  • Taxa de fluxo máxima: 3000 litros por hora
  • Altura máxima de entrega: 26 metros
  • Maximum Suction Height: 8 metros
  • Conexão de sucção: 42 mm (1 1/4" AG)
  • Conexão de pressão: 33.3 mm (R1 IG)
  • Características especiais: ECO switch, Thermal protection, Water filling screw, Water drain screw, Carrying handle
  • País de origem: China

9. Garantia e Suporte

For warranty information, service, or technical support, please refer to the official Einhell website or contact your local authorized Einhell dealer. Keep your purchase receipt as proof of purchase for any warranty claims.