IK Multimedia Z-Tone DI Instrument Preamp Manual do usuário

Introdução

The IK Multimedia Z-Tone DI is an advanced direct box and preamp designed for guitar and bass players. It offers unique tone-shaping capabilities and flexible re-amping options, allowing you to capture both processed and clean DI tracks simultaneously. This manual provides comprehensive instructions for setting up, operating, and maintaining your Z-Tone DI.

Produto acimaview

The Z-Tone DI features a robust metal construction and intuitive controls for optimal sound manipulation.

Frente view of the IK Multimedia Z-Tone DI, showing the Input, Link, Gain, and Z-Tone controls.

Traseira view of the IK Multimedia Z-Tone DI, displaying the Balanced Output, Unbalanced Output, Ground Lift, and Pad switches, along with the battery compartment.

Configurar

Ligando a unidade

The Z-Tone DI can be powered via 9V battery or 48V phantom power from a connected mixer or audio interface. Ensure the power source is correctly connected before operation.

Conectando seu instrumento

Connect your instrument (guitar or bass) to the ENTRADA jack using a standard 1/4" TS instrument cable.

Connecting to an Audio Interface/Mixer

For recording, connect the EQUILIBRADO (XLR) to an XLR input on your audio interface or mixer. Alternatively, use the DESequilibrado (1/4" TS) for unbalanced connections.

Using the Link Output (Re-amp(ing)

O LINK output allows you to send a clean, unprocessed signal to an external amplifier or pedalboard while simultaneously sending the processed signal to your interface. Connect the LINK jack para o seu amplifier's input or the first pedal in your pedal chain.

Controles operacionais

Ganhe controle

Ajuste o GANHO knob to set the input level. The LED indicator next to the gain knob will illuminate green for a healthy signal and red if the signal is clipping. Adjust the gain to ensure the LED remains green during playing, occasionally flashing red on peaks.

Active/Passive Pickup Selector

Use o ATIVO/PASSIVO switch to match the impedance to your instrument's pickups. Select ATIVO for instruments with active pickups and PASSIVA for instruments with passive pickups. This optimizes the signal for the best tone.

Z-Tone Knob

O Z-TONE knob allows you to continuously vary the input impedance from 1 MΩ (SHARP) to 2.2 kΩ (BOLD). This unique feature interacts with your instrument's pickups, altering the tone and feel. Experiment with different settings to find the sweet spot for your instrument and desired sound.

Pure/JFET Channel Selector

O PURE/JFET switch selects between two distinct preamp circuitos:

• PURE: Provides an ultra-linear, transparent sound, preserving the natural tone of your instrument.
• JFET: Engages a Class A JFET input buffer, adding subtle harmonic enhancement and a warm, tube-like character to your sound.

Chave de levantamento do solo

O ELEVADOR GND switch disconnects the ground connection between the Z-Tone DI and the connected equipment. Use this switch to eliminate hum or buzz caused by ground loops.

Interruptor de atenuação (-20dB)

O PAD-20dB switch attenuates the output signal by 20dB. Engage this switch if the output signal is too hot for the input of your audio interface or mixer, preventing clipping.

Manutenção

To ensure the longevity and optimal performance of your Z-Tone DI, follow these maintenance guidelines:

• Mantenha o aparelho limpo e livre de poeira. Use um pano macio e seco para a limpeza.
• Evite expor o aparelho a temperaturas extremas, umidade ou luz solar direta.
• When not in use for extended periods, remove the 9V battery to prevent leakage.
• Manuseie todos os cabos e conectores com cuidado para evitar danos.

Solução de problemas

Sem saída de som

• Check all cable connections to ensure they are secure and correctly plugged in.
• Verify that the Z-Tone DI is receiving power (either from a 9V battery or 48V phantom power). The "ON" LED should be illuminated.
• Ensure the input gain is set appropriately and not too low.
• Check the input selection on your audio interface or mixer.

Zumbido ou ruído de zumbido

• Envolva o ELEVADOR GND Alternar para interromper possíveis loops de terra.
• Ensure all power cables are properly grounded.
• Verifique se há cabos ou conexões defeituosas.

Som distorcido

• Reduzir o GANHO knob on the Z-Tone DI.
• Envolva o PAD-20dB switch if the output signal is too strong for your interface's input.
• Check the input levels on your audio interface or mixer to prevent clipping.

Especificações

Garantia e Suporte

For warranty information and technical support, please visit the official IK Multimedia webou entre em contato com o serviço de atendimento ao cliente. Guarde o comprovante de compra para eventuais solicitações de garantia.

Oficial Website: www.ikmultimedia.com