NOCO Genius GENPRO10X1

1. Produto acabadoview

The NOCO GENPRO10X1 is a fully-sealed, waterproof onboard battery charger designed for a single 12-volt battery, delivering 10 amps. It is suitable for charging and maintaining various battery types, including lead-acid (flooded, AGM, gel) and lithium-ion (LiFePO₄) batteries. This re-engineered charger is 27% smaller and offers 19% more power than its predecessor, making it a compact and powerful solution for marine and outdoor environments.

2. Conteúdo da embalagem

• GENPRO10X1 Carregador e mantenedor de baterias marítimo inteligente à prova d'água de 1 bancos, 10A (120-240 VCA)
• Guia do usuário do carregador de bateria marítimo de bordo
• (2) Parafusos de cabeça treliçada pretos

3. Principais características

• Compacto e Poderoso: 41% smaller and 33% more powerful than the GEN1, engineered for harsh marine environments.
• Single Bank Charging: Avaliado em 10 amps for a single 12V battery, ideal for marine, boat, starter, and deep-cycle systems.
• Versatile Charging Modes: Selectable modes for 12V, 12V AGM, 12V Lithium, and 12V Repair Mode, allowing precise charging for various battery chemistries.
• Carregamento de precisão: Integrated thermal sensor automatically adjusts charging based on ambient temperature to prevent overcharging or undercharging.
• Recuperação de bateria descarregada: Can charge batteries as low as 1 volt, with a Force Mode to manually initiate charging for deeply discharged batteries down to zero volts.
• Redefined Mounting: Simplified system for fast, secure installation in any orientation, featuring an anti-vibration backing.
• Design impermeável: Fully-sealed, IP68 rated for waterproof protection, tested to withstand thousands of hours underwater.
• Operação automática: Provides year-round, all-season, all-weather charging with zero overcharge, automatically returning to its last selected mode.

4. Configuração e instalação

The GENPRO10X1 is designed for easy and secure installation. It includes 72-inch DC cables with 3/8-inch eyelets and a 72-inch AC cable (Type-B). The redesigned mounting system allows for installation in any orientation, including upside down, and features an anti-vibration backing to minimize shock and noise.

1. Escolha um local de montagem: Select a secure, dry location within your marine vessel or vehicle. The charger's IP68 rating ensures protection against water, but proper ventilation is always recommended.
2. Secure the Charger: Use the two included truss-head screws to firmly mount the charger. The anti-vibration backing helps to isolate shock and noise.
3. Conectar à bateria: Attach the 3/8-inch eyelets of the DC cables to your 12V battery terminals. Ensure correct polarity: red to positive (+), black to negative (-).
4. Conecte à energia CA: Plug the Type-B AC cable into a standard 120-240VAC outlet.

Descrição da imagem: The NOCO Genius GENPRO10X1 charger is shown installed in a boat's battery compartment, connected to a deep cycle battery. This illustrates the compact size and on-board installation capability.

Descrição da imagem: The NOCO Genius GENPRO10X1 charger is depicted being splashed with water, emphasizing its IP68 waterproof rating and suitability for marine environments.

5. Instruções de operação

The GENPRO10X1 features selectable charging modes to optimize performance for nearly any battery chemistry or condition. The charger automatically detects ambient temperature and adjusts the charge cycle accordingly.

1. Ligar: Once connected to the battery and AC power, the charger will automatically begin its diagnostic and charging process.
2. Selecione o modo de carregamento: Press the 'MODE' button to cycle through the available charging modes:
   • 12V: Para baterias de 12V de eletrólito líquido, gel, eletrólito líquido aprimorado, sem manutenção e cálcio.
   • AGM 12V: Para baterias 12V AGM.
   • Bateria de lítio de 12V: For 12V lithium-ion batteries (LiFePO₄) with Battery Management Systems (BMS).
   • Modo de reparo de 12V: Used to repair old, idle, damaged, stratified, or sulfated 12V lead-acid batteries.
3. Force Mode (for Dead Batteries): For batteries as low as zero volts, press and hold the 'MODE' button for approximately three (3) seconds to activate Force Mode. This allows manual charging to begin.
4. Indicadores de carregamento: The charger features LED indicators to show the charging status and battery health. A solid green light indicates a fully charged battery.

Descrição da imagem: An illustration detailing the various advanced charging modes available on the NOCO Genius GENPRO10X1, including 12V, 12V AGM, 12V Lithium, Repair Mode, and Force Mode, with descriptions of their applications.

Descrição da imagem: A hand is shown pressing the 'MODE' button on the NOCO Genius GENPRO10X1 charger, demonstrating the activation of Force Mode to charge a deeply discharged battery, with a multimeter showing zero volts.

6. Manutenção

The GENPRO10X1 is designed to be a battery maintainer, ensuring optimal battery health over extended periods. It provides all-season, all-weather charging and automatically prevents overcharging. Simply leave it plugged in to keep your battery topped off and extend its lifespan.

• Inspecione regularmente o carregador e os cabos para verificar se há sinais de danos.
• Keep the charger clean and free from debris.
• Ensure proper ventilation around the charger, even though it is sealed.

Descrição da imagem: The NOCO Genius GENPRO10X1 is shown connected to a battery, illustrating its completely automatic, worry-free charging capabilities, including year-round charging, zero overcharge, and auto memory.

7. Solução De Problemas

If you encounter issues with your GENPRO10X1 charger, please refer to the detailed user guide included in the package. Common issues and their solutions are typically covered there. Ensure all connections are secure and the correct charging mode is selected for your battery type.

8. Especificações

9. Garantia e Suporte

The NOCO GENPRO10X1 is backed by a Garantia de 3 ano. For support or warranty claims, please refer to the contact information provided in your user guide or visit the official NOCO website. The product is engineered in the USA.