Behringer RX1202FX V2 12-Channel Analog Mixer with FX

Introdução

The Behringer RX1202FX V2 is a premium 12-input microphone/line mixer designed for professional audio applications. This 3U rack-mountable analog mixer offers ultra-low noise operation and versatile connectivity for various audio setups. It features high-quality XENYX microphone preamps, a warm 2-band 'British' EQ on each channel, and a studio-grade 24-bit multi-FX processor with 100 presets including reverb, chorus, flanger, delay, and pitch shifter.

This manual provides essential information for the safe and efficient operation of your RX1202FX V2 mixer. Please read it thoroughly before use and retain it for future reference.

Instruções importantes de segurança

AVISO: To reduce the risk of electric shock, do not expose this appliance to rain or moisture. Do not remove the cover. No user-serviceable parts inside. Refer servicing to qualified service personnel.

• Leia estas instruções.
• Guarde estas instruções.
• Preste atenção a todos os avisos.
• Siga todas as instruções.
• Não utilize este aparelho perto de água.
• Limpe somente com pano seco.
• Não bloqueie nenhuma abertura de ventilação. Instale de acordo com as instruções do fabricante.
• Não instale perto de fontes de calor, como radiadores, registros de calor, fogões ou outros aparelhos (incluindo amplificadores) que produzem calor.
• Não anule o propósito de segurança do plugue polarizado ou do tipo aterramento. Um plugue polarizado tem duas lâminas, uma mais larga que a outra. Um plugue do tipo aterramento tem duas lâminas e um terceiro pino de aterramento. A lâmina larga ou o terceiro pino são fornecidos para sua segurança. Se o plugue fornecido não se encaixar na sua tomada, consulte um eletricista para substituir a tomada obsoleta.
• Proteja o cabo de alimentação para que não seja pisado ou apertado, principalmente nos plugues, nas tomadas de conveniência e no ponto de saída do aparelho.
Utilize somente acessórios/anexos especificados pelo fabricante.
• Desligue este aparelho durante tempestades com raios ou quando não for utilizado por longos períodos de tempo.
• Entregue todos os serviços de manutenção a pessoal de serviço qualificado. O serviço é necessário quando o aparelho foi danificado de alguma forma, como cabo de alimentação ou plugue danificado, líquido foi derramado ou objetos caíram no aparelho, o aparelho foi exposto à chuva ou umidade, não opera normalmente ou foi derrubado.

Configurar

1. Desembalagem e Inspeção

Carefully unpack your RX1202FX V2 mixer. Inspect the unit for any signs of damage that may have occurred during transit. Retain the packaging materials for future shipping or if the unit needs to be returned for service.

2. Montagem em Rack

The RX1202FX V2 is designed for standard 19-inch rack mounting, occupying 3U of rack space. Ensure adequate ventilation around the unit to prevent overheating. Do not block the ventilation openings.

3. Conexão de energia

Connect the supplied power cord to the AC/POWER inlet on the rear panel of the mixer and then to a suitable power outlet. Ensure the voltage matches the requirements specified on the unit. The mixer operates at 120 Volts.

4. Conectando entradas

The RX1202FX V2 offers 12 input channels:

• Entradas de microfone (canais 1-8): Use balanced XLR cables for connecting microphones. These channels feature XENYX preamps.
• Entradas de linha (canais 1 a 12): Use balanced 1/4" TRS or unbalanced 1/4" TS cables for connecting line-level sources such as keyboards, drum machines, or other audio devices. Channels 9-12 are stereo line inputs.
• Entrada de CD/fita: Connect external playback devices (e.g., CD player, media player) using RCA cables to the CD/TAPE IN jacks.

5. Connecting Outputs

• Produtos principais: Connect your main PA system or recording interface to the MAIN OUT (XLR) jacks.
• Saídas da sala de controle: Connect your studio monitors to the CTRL OUT (1/4" TRS) jacks.
• Saída de fones de ouvido: Connect headphones to the PHONES (1/4" TRS) jack for monitoring.
• Aux Sends: Use the AUX SENDS (1/4" TS) to send signals to external effects processors or monitor mixes.
• Aux Returns: Connect the output of external effects processors to the AUX RETURNS (1/4" TS) jacks.

Imagem: Rear panel of the Behringer RX1202FX V2 mixer. This view displays the AC power inlet, power switch, main XLR outputs, control room outputs, monitor outputs, CD/Tape inputs and outputs, Aux sends and returns, and the 8 XLR microphone inputs with corresponding 1/4" line inputs and inserts.

Instruções de operação

1. Ligar / desligar

After all connections are made, press the AC/POWER switch on the rear panel to turn the unit on. Always turn on your mixer before connecting power amplifiers or active speakers, and turn it off after them, to prevent loud thumps.

2. Controles de canal (canais 1 a 12)

Imagem: Front panel of the Behringer RX1202FX V2 mixer. This view highlights the individual channel strips with Gain, High EQ, Low EQ, MON (Monitor) send, FX send, PAN/BAL, and Level faders. The master section with the FX processor display, program knob, FX to Main/MON controls, CD/Tape controls, and Main Mix/Phones level controls is also visible.

• GANHO: Adjusts the input sensitivity for the microphone or line input. Use the CLIP LED as a guide; it should flash only occasionally on the loudest peaks.
• EQ ALTO: Adjusts the high-frequency content of the channel.
• EQ BAIXO: Adjusts the low-frequency content of the channel.
• MON (Monitor) Send: Controls the amount of signal sent to the monitor output. This is pre-fader.
• Envio de FX: Controls the amount of signal sent to the internal effects processor. This is post-fader.
• PAN/BAL: Pans the mono signal (channels 1-8) or balances the stereo signal (channels 9-12) across the stereo main mix.
• Fader de NÍVEL: Ajusta o nível de saída geral do canal à mixagem principal.
• LED CLIPE: Acende quando o sinal de entrada está muito alto, indicando possível distorção. Reduza o GANHO se este LED acender com frequência.

3. Phantom Power (+48V)

For condenser microphones, activate the +48V PHANTOM switch on the rear panel. Ensure microphones are connected before engaging phantom power to prevent damage.

4. FX Processor

The RX1202FX V2 includes a 24-bit multi-effects processor with 100 presets. Use the PROGRAM knob to select the desired effect. The FX TO MAIN and FX TO MON controls in the master section adjust the amount of the effect signal sent to the main mix and monitor mix, respectively.

5. Master Section Controls

• Fader da MISTURA PRINCIPAL: Controla o nível de saída geral da mixagem estéreo principal.
• PHONES/CTRL ROOM Level: Adjusts the output level for the headphones and control room outputs.
• CD/TAPE TO MAIN/CTRL ROOM: Buttons to route the CD/Tape input to the main mix or control room/phones output.

Manutenção

Limpeza

Regularly clean the exterior of the mixer with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as they may damage the finish. Keep faders and knobs free from dust and debris.

Armazenar

When not in use for extended periods, store the mixer in a cool, dry environment, away from direct sunlight and extreme temperatures. If rack-mounted, ensure the rack provides adequate protection from dust and physical impact.

Solução de problemas

Especificações

Garantia

Behringer products, distributed by authorized MUSIC Tribe dealers, include a 3-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims. For specific terms and conditions, refer to the warranty information provided with your product or visit the official Behringer website.

Apoiar

If you encounter issues not covered in the troubleshooting section, or require further assistance, please contact your authorized Behringer dealer or visit the official Behringer support website for up-to-date information, FAQs, and service contact details.