BTF-LIGHTING RT9 & VP LED Strip Controller Kit User Manual

1. Introdução

This manual provides detailed instructions for the installation, operation, and maintenance of your BTF-LIGHTING RT9 & VP LED Strip Controller Kit. This kit is designed to provide versatile control over RGB and RGBW LED strips, offering features such as multi-zone control, color adjustment, and brightness dimming via a 2.4GHz RF wireless remote.

2. Informações de segurança

Garantir o volume de entradatage (12V/24V DC) matches the requirements of both the controller and the LED strips. Incorrect voltage pode causar danos.
Do not exceed the maximum output current or power ratings of the controller. Overloading can lead to overheating and failure.
Always disconnect power before making any wiring connections to prevent electrical shock.
Install the controller in a dry, well-ventilated area. Avoid exposure to moisture, high temperatures, or corrosive environments.
Este produto foi projetado somente para uso interno.
Mantenha fora do alcance de crianças.

3. Conteúdo da embalagem

Verifique se todos os itens listados abaixo estão incluídos em seu pacote:

Image showing the BTF-LIGHTING RT9 remote, VP controller, user manual, battery, and wall mount bracket.

This image displays the complete contents of the BTF-LIGHTING RT9 & VP LED Strip Controller Kit, including the remote control, VP receiver, instruction manual, two AAA batteries, and a wall-mounted remote holder.

1 x RT9 RF 2.4GHz Wireless Remote Control
1 x VP 4-Channel LED Controller (Receiver)
1 x Remote Wall Mount Bracket
2 pilhas AAA (para o controle remoto)
1 x Manual do Usuário (este documento)

4. Especificações

Recurso	Especificação
Número do modelo	JQGD RT9+VP
Vol de entradatage	12/24 V CC
Corrente de entrada (máx.)	15.5A
Volume de saídatage	4 x (12/24)V DC
Corrente de saída	4 channels, 4A/channel, Max 6A total
Potência de saída (máx.)	4 x (48/96)W
Tipo de saída	Vol constantetage
Sinal de Entrada	RF 2.4 GHz
Distância de controle	30m (espaço sem barreiras)
Dimming Gray Scale	4096 (2 ^ 12) níveis
Faixa de escurecimento	0-100%
Freqüência PWM	750 Hz (padrão)
Temperatura de operação	-30°C ~ +55°C
Classificação IP	IP20
Temperatura da caixa (máx.)	Tc: + 85 ° C
Uso interno/externo	Interior

5. Configuração

5.1. Diagrama de Fiação

Follow the diagram below for correct electrical connections. Ensure all connections are secure before applying power.

Detailed wiring diagram for the BTF-LIGHTING LED controller, showing connections from power adapter to controller and then to RGB/RGBW LED strips.

This diagram illustrates the correct wiring connections for the VP 4CH LED Controller. It shows the AC 100-240V power adapter connecting to the controller's input, and the controller's output connecting to the RGB/RGBW LED strip lights. The remote controller is also shown for reference.

Connect your 12V or 24V DC power adapter to the input terminals of the VP controller. Ensure the positive (+) and negative (-) terminals are correctly matched.
Connect the LED strip to the output terminals of the VP controller. For RGBW strips, connect the Red (R), Green (G), Blue (B), and White (W) wires to their respective terminals, and the common positive (+) wire to the V+ terminal. For RGB strips, connect R, G, B, and V+.
Certifique-se de que todas as conexões estejam firmes e isoladas para evitar curto-circuitos.

5.2. Controlador sobreview

Familiarize yourself with the controller's ports and indicators.

Fechar-se view of the BTF-LIGHTING VP LED controller, highlighting input/output terminals and the match key.

Um detalhado view of the VP LED Controller, indicating the power input terminals (12-24VDC), DC socket input, match key, LED indicator, and the output terminals for Red, Green, Blue, and White LED channels, along with the common positive (+) output.

Entrada de energia: Terminals for 12-24V DC power supply.
DC Socket Input: Alternative power input via a DC barrel jack.
Match Key: Utilizado para emparelhar o controle remoto.
Indicador LED: Shows the status of the controller (e.g., pairing mode, signal reception).
Terminais de saída: Labeled V+, R, G, B, W for connecting LED strips.

5.3. Remote Pairing

To pair the RT9 remote control with the VP controller:

Ensure the VP controller is powered on and connected to the LED strip.
Within 3 seconds of powering on the controller, press the 'Match' key on the VP controller once. The LED indicator on the controller will flash.
Immediately press any button on the RT9 remote control.
If pairing is successful, the LED strip will flash a few times, indicating a successful connection.
If pairing fails, repeat the steps. Ensure the remote is within range and its batteries are functional.

6. Instruções de operação

6.1. Basic Remote Functions

The RT9 remote control allows for comprehensive management of your LED lighting. Insert the two AAA batteries into the remote before use.

Illustration of a user controlling multiple lighting zones in a house using the BTF-LIGHTING RF 2.4GHz wireless remote.

This image demonstrates the wireless transmission capability of the RT9 remote, allowing control of individual lighting zones (Zone 1 to Zone 4 and more) within a 30-meter distance in a barrier-free space. The remote can control multiple LED bulbs or strips in different areas of a home.

Botão de energia: Turns the connected LED strips on or off.
Roda de cores: Touch the color wheel to select any desired color.
Ajuste de brilho: Use os botões de aumentar/diminuir o brilho para ajustar a intensidade da luz.
Mode Buttons (S1, S2): Cycle through pre-programmed dynamic lighting modes.
Zone Selection (1, 2, 3, 4): Select individual zones to control them independently. Press and hold a zone button to link/unlink a controller to that zone.
RGB/W Buttons: Directly select Red, Green, Blue, or White colors.

6.2. Controle de Zona

The RT9 remote supports up to 4 independent zones, allowing you to control different sets of LED strips separately or together.

Diagram showing multiple BTF-LIGHTING VP controllers linked wirelessly, extending the control range up to 30 meters between each unit.

This diagram illustrates how multiple VP controllers can be linked together to extend the wireless control range. Each controller can communicate with others within a 30-meter radius, allowing for a larger network of controlled LED strips.

To assign a controller to a zone: Power on the controller, then within 3 seconds, press the 'Match' key on the controller. Immediately press the desired zone number (1-4) on the remote. The LED strip will flash to confirm assignment.
To control a specific zone, press its corresponding number button on the remote.
To control all zones simultaneously, press the 'All' button (if available on your remote model, or cycle through zones).

6.3. Product Feature Videos

This video demonstrates the color-changing capabilities and brightness adjustment of the RGBW 5050SMD LED strip light when controlled by the BTF-LIGHTING system. It showcases the range from 1% to 100% brightness and millions of available colors.

This video provides a visual guide on how to use the RT9 remote control with the VP LED strip controller. It shows the remote's functions for changing colors (RGB and white), adjusting brightness, and selecting different lighting modes for 4-pin and 5-pin LED strips.

7. Manutenção

Limpeza: Gently wipe the controller and remote with a dry, soft cloth. Do not use harsh chemicals or abrasive cleaners.
Substituição da bateria: Replace the remote control batteries (2x AAA) when the control range decreases or the remote becomes unresponsive.
Armazenar: If storing the kit for an extended period, remove batteries from the remote and store in a cool, dry place.

8. Solução De Problemas

Emitir	Possível causa/solução
A fita de LED não acende.	Check power supply connection to the controller. Ensure the power supply provides the correct voltage (12V/24V) and sufficient amperage for your LED strip length. Verify LED strip is correctly wired to the controller outputs (V+, R, G, B, W). Check for any loose connections or damaged wires.
Remote does not control the LED strip.	Ensure the remote is paired with the controller. Refer to the "Remote Pairing" section (5.3). Verifique o nível da bateria do controle remoto e substitua-a, se necessário. Ensure there are no significant obstructions between the remote and the controller. Confirm the remote is within the 30m control range.
Cores incorretas ou oscilação da imagem.	Verify wiring connections for RGB/RGBW channels are correct and secure. Ensure the LED strip type (RGB or RGBW) matches the controller's configuration. Check for a stable power supply; voltage fluctuations can cause flickering.
Limited control range.	Ensure the controller is not obstructed by large metal objects or other sources of RF interference. The maximum control distance is 30m in barrier-free space. Walls and other obstacles will reduce this range. Consider adding more controllers to extend the network range if needed.

9. Garantia e Suporte

BTF-LIGHTING products are manufactured to high standards and undergo rigorous testing. This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty details, please refer to the product packaging or contact your retailer.

If you encounter any issues or require technical assistance, please contact BTF-LIGHTING customer support through the retailer's platform or the official BTF-LIGHTING website. Please have your product model number (JQGD RT9+VP) and purchase information ready when contacting support.

BTF-LIGHTING JQGD RT9+VP