VIBE FB-BLD-BLK
VIBE LED Light Bar Multicolor with Remote Control
Model: FB-BLD-BLK
1. Introdução
This manual provides essential information for the safe and effective use of your VIBE LED Light Bar. This multicolor LED light bar is designed to enhance indoor environments with customizable lighting effects, controlled conveniently via a remote.

Figure 1: The VIBE LED Light Bar with its remote control and USB power cable.
2. Informações de segurança
Leia e compreenda todas as instruções de segurança antes de usar este produto. O não cumprimento destas instruções pode resultar em choque elétrico, incêndio ou ferimentos graves.
- Somente para uso interno: Este produto foi desenvolvido para uso interno em locais secos. Não o exponha à água ou umidade.
- Segurança elétrica: Certifique-se de que a fonte de alimentação voltage matches the product's requirements (120V). Do not overload electrical outlets.
- Evite água: Este produto é não water resistant. Do not use near sinks, bathtubs, or in damp ambientes.
- Ventilação: Do not cover the light bar or obstruct its ventilation.
- Crianças e animais de estimação: Mantenha fora do alcance de crianças e animais de estimação.
- Manuseio: Handle with care. While the base provides stability, the light bar can be top-heavy and may tip if not placed securely.
- Limpeza: Desligue da tomada antes de limpar. Use um pano macio e seco.
3. Conteúdo da embalagem
Verifique se todos os itens listados abaixo estão incluídos em seu pacote:
- VIBE LED Light Bar (Model: FB-BLD-BLK)
- Controle remoto
- Cabo de alimentação USB
- 2 pilhas AAA (para o controle remoto)

Figure 2: The VIBE LED Light Bar packaging, indicating included components.
4. Configuração
- Descompacte: Remova cuidadosamente todos os componentes da embalagem.
- Instalar pilhas no controle remoto: Open the battery compartment on the back of the remote control. Insert the 2 AAA batteries, ensuring correct polarity (+/-). Close the compartment.
- Conecte a energia: Insert the small end of the USB power cable into the port on the base of the LED Light Bar. Plug the larger USB end into a compatible USB power adapter (not included) or a powered USB port (e.g., on a computer or wall charger).
- Colocação: Place the LED Light Bar on a stable, flat surface. For wall mounting, ensure the surface is suitable and secure. Due to its design, ensure the light bar is placed in a location where it will not be easily knocked over.
5. Instruções de operação
The VIBE LED Light Bar is controlled using the included remote control.
- Ligar/desligar: Pressione o Green Power Button to turn the light bar ON. Press the Red Power Button to turn the light bar OFF.
- Seleção de cores: The remote features a variety of colored buttons. Press any colored button to change the light bar to that specific color.
- Ajuste de brilho: Use o ▲ (seta para cima) e ▼ (down arrow) buttons to increase or decrease the brightness of the selected color.
- Modos dinâmicos: The remote includes several dynamic lighting modes:
- INSTANTÂNEO: Alterna rapidamente entre as cores.
- SUAVE: Transições suaves entre cores.
- DESAPARECER: Gradually fades between colors.
- ESTROBO: Flashes colors on and off.
- Mode Speed Adjustment: For dynamic modes, use the gear-shaped buttons (⚙) to adjust the speed of the color transitions or flashes.
6. Manutenção
Proper maintenance ensures the longevity and optimal performance of your LED Light Bar.
- Limpeza: Always disconnect the light bar from the power source before cleaning. Use a soft, dry, lint-free cloth to wipe the surface. Do not use abrasive cleaners, solvents, or harsh chemicals.
- Armazenar: Quando não estiver em uso por longos períodos, guarde a barra de luz em local fresco e seco, longe da luz solar direta e de temperaturas extremas.
- Substituição da bateria: If the remote control's functionality diminishes, replace the 2 AAA batteries.
7. Solução De Problemas
If you encounter issues with your VIBE LED Light Bar, refer to the following common problems and solutions:
| Problema | Possível causa | Solução |
|---|---|---|
| A barra de luz não liga. | Sem energia, conexão solta, bateria do controle remoto descarregada. | Ensure USB cable is securely connected and plugged into a working power source. Check remote batteries and replace if necessary. |
| O controle remoto não está funcionando. | Dead batteries, remote not aimed at sensor, interference. | Replace remote batteries (2 AAA). Ensure direct line of sight between remote and light bar sensor. Remove any obstructions. |
| Light bar is stuck on one color or flashing. | Incorrect mode selected, remote malfunction. | Press a specific color button on the remote to exit dynamic modes. If the remote is unresponsive, try replacing its batteries. Unplug the light bar for 30 seconds and plug it back in to reset. |
| Light bar is unstable or tips over easily. | Unstable surface, light bar is top-heavy. | Place the light bar on a firm, level, and stable surface. Ensure it is not in a high-traffic area where it could be accidentally bumped. |
8. Especificações
| Recurso | Detalhe |
|---|---|
| Marca | VIBRAÇÃO |
| Número do modelo | FB-BLD-BLK |
| Dimensões do produto | 3.5 x 2 x 11 polegadas |
| Peso do item | 6.6 onças (0.41 libras) |
| Tipo de fonte de luz | LIDERADO |
| Cor | Black (housing), Multicolor (light) |
| Material | Plástico |
| Tipo de acabamento | Polido |
| Fonte de energia | Elétrica com fio (USB) |
| Volumetage | 120 Volts |
| Tipo de controlador | Controle remoto |
| Tecnologia de Conectividade | RF (Radiofrequência) |
| Uso interno/externo | Interior |
| Nível de resistência à água | Não resistente à água |
| Pilhas necessárias | 2 pilhas AAA (incluídas para o controle remoto) |
9. Garantia e suporte
For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the official VIBE website. Guarde o recibo de compra para reclamações de garantia.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.