Antec VSK3000E-U3_US Mini Tower Case

Introdução

This manual provides detailed instructions for the installation, operation, and maintenance of your Antec VSK3000E-U3_US Mini Tower Case. Designed for Micro ATX motherboards, this case offers a robust foundation for building your computer system. Please read this manual thoroughly before beginning installation to ensure proper setup and safe operation.

Informações de segurança

• Always disconnect the power supply from the wall outlet before installing or removing any components to prevent electric shock.
• Manuseie os componentes com cuidado para evitar danos causados ​​por eletricidade estática. Considere o uso de uma pulseira antiestática.
• Be aware of sharp edges inside the case. Wear protective gloves if necessary.
• Assegure-se de que haja ventilação adequada ao redor do gabinete para evitar superaquecimento.
• Keep the case away from liquids and excessive humidity.

Características do produto

The Antec VSK3000E-U3_US Mini Tower Case is constructed from SGCC steel, providing durability and meeting Thermally Advantaged Chassis (TAC) 2.0 guidelines for efficient cooling.

• Material: SGCC steel construction.
• Compatibilidade da placa-mãe: Micro ATX.
• Portas de E/S frontais: 2 x USB 3.0, Audio In/Out.
• Baias de unidade:
  • 2 x 5.25" external drive bays.
  • 2 x 3.5" internal HDD bays.
• Slots de expansão: 4.
• Sistema de refrigeração:
  • 1 x 92 mm rear exhaust fan (included).
  • 1 x 92 mm front intake fan (optional, user-installed).

Configuração e instalação

Follow these steps to install your components into the Antec VSK3000E-U3_US case.

1. Prepare o caso

1. Coloque a caixa sobre uma superfície plana e estável.
2. Remove the side panels by unscrewing the thumbscrews at the rear and sliding the panels backward.

Imagem: Interior view of the Antec VSK3000E-U3_US case with the side panel removed, revealing the internal layout, drive bays, and pre-installed rear exhaust fan.

2. Install the Motherboard

1. Instale o espelho de E/S fornecido com a placa-mãe na abertura na parte traseira do gabinete.
2. Align the motherboard with the standoffs inside the case. Ensure all standoffs match the screw holes on your Micro ATX motherboard.
3. Fixe a placa-mãe com parafusos. Não aperte demais.

3. Install the Power Supply

1. The VSK3000E-U3_US supports a bottom-mount power supply. Position your power supply unit (PSU) in the designated area at the bottom rear of the case.
2. Fixe a fonte de alimentação ao gabinete usando os parafusos pela parte traseira.

4. Install Storage Drives

The case features 2 x 5.25" external drive bays and 2 x 3.5" internal HDD bays.

• 5.25" External Drives (e.g., Optical Drive): Remove the front panel bay cover. Slide the drive into the bay from the front and secure it with screws.
• 3.5" Internal HDDs: Slide the hard drive into an available 3.5" internal bay and secure it with screws.

Imagem: Interna view of the Antec VSK3000E-U3_US case, highlighting the 5.25" external and 3.5" internal drive bays, along with pre-routed front panel cables.

5. Conecte os cabos do painel frontal

Connect the front panel cables (USB 3.0, Audio In/Out, Power Switch, Reset Switch, Power LED, HDD LED) to the corresponding headers on your motherboard. Refer to your motherboard manual for exact pin assignments.

Imagem: Frente view of the Antec VSK3000E-U3_US case, displaying the two 5.25" external drive bay covers and the front I/O panel with USB 3.0 ports and audio jacks.

6. Instale as placas de expansão.

Remove the necessary expansion slot covers at the rear of the case. Insert your graphics card or other expansion cards into the appropriate PCIe/PCI slots on the motherboard and secure them with screws.

7. Gerenciamento de cabos

Route cables neatly to improve airflow and aesthetics. Use cable ties or straps to bundle cables together.

8. Fechar o caso

Once all components are installed and cables are managed, reattach the side panels and secure them with the thumbscrews.

Instruções de operação

After completing the installation, connect your monitor, keyboard, mouse, and power cable to the system. Press the power button on the front panel to turn on your computer. The case provides the physical housing and cooling for your components; operating instructions for the computer system itself are dependent on the installed hardware and software.

Imagem: Frente inclinada view of the Antec VSK3000E-U3_US case, highlighting the power button and the accessible front I/O panel.

Manutenção

• Limpeza de pó: Regularly clean dust from the case interior and fan filters (if any) using compressed air or a soft brush. Dust buildup can impede airflow and lead to overheating.
• Verificação do ventilador: Periodically check the fans (rear exhaust, optional front intake) for proper operation and excessive noise.
• Gerenciamento de cabos: Ensure cables remain neatly organized to maintain optimal airflow.

Solução de problemas

• Sistema não liga:
  • Ensure the power supply is properly connected to the wall outlet and the motherboard.
  • Verifique se o cabo do interruptor de alimentação do painel frontal está conectado corretamente ao conector da placa-mãe.
• Superaquecimento:
  • Check for excessive dust buildup inside the case and on fans.
  • Ensure fans are spinning correctly.
  • Verify that the case has adequate ventilation and is not placed in an enclosed space.
• Painel frontal USB/Áudio não funciona:
  • Confirm that the USB 3.0 and Audio In/Out cables are securely connected to the correct headers on the motherboard.

Especificações

Imagem: Dimensional view of the Antec VSK3000E-U3_US case, indicating its height (14.4"), depth (15.5"), and width (6.8").

Garantia e Suporte

For warranty information and technical support, please refer to the official Antec website or contact Antec customer service. Keep your purchase receipt for warranty claims.

Antec Oficial Website: www.antec.com