ABB AD1NO-R-15m Modular Device Switch User Manual

1. Introdução

The ABB AD1NO-R-15m is an analog time switch designed for daily scheduling with a 15-minute switching interval. This modular device features one normally open (NO) channel and includes a power reserve function to maintain timekeeping during power outages. It is suitable for various electrical scheduling applications.

Figura 1: Frente view of the ABB AD1NO-R-15m Modular Device Switch, highlighting its compact design and control interface.

2. Instruções importantes de segurança

Please read and understand all safety instructions before installing, operating, or maintaining this device. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• A instalação e a manutenção devem ser realizadas somente por pessoal qualificado.
• Disconnect power before installation, maintenance, or servicing to prevent electric shock.
• Ensure all wiring complies with local and national electrical codes and regulations.
• Não utilize o aparelho se ele apresentar sinais de danos.
• This device is designed for indoor use in dry environments.

3. Produto acabadoview

The AD1NO-R-15m is an analog time switch with the following key features:

• Discagem analógica: For setting daily schedules.
• 15-Minute Switching: Allows precise control over connected circuits with 15-minute intervals.
• 1 Normally Open (NO) Channel: Controla um circuito elétrico.
• Reserva de energia: Maintains timekeeping for a specified duration during power interruptions.
• Design modular: Suitable for integration into standard electrical panels on a DIN rail.

Note: The power reserve ensures the timer continues to function accurately even if the main power supply is temporarily lost.

4. Configuração e instalação

Follow these steps for proper installation of the AD1NO-R-15m Modular Device Switch:

1. Desconexão de energia: Before beginning, ensure the main power supply to the installation area is completely disconnected at the circuit breaker or fuse box. Verify with a voltage testador.
2. Montagem: Mount the AD1NO-R-15m switch onto a standard DIN rail within an appropriate electrical enclosure. Ensure it is securely fastened.
3. Fiação:
   • Connect the incoming phase (L) and neutral (N) wires to the designated input terminals of the time switch.
   • Connect the load wire from the output terminal of the time switch to the device you wish to control.
   • Ensure all connections are tight and secure. Refer to the wiring diagram printed on the device for specific terminal identification.
4. Restauração de energia: Once all connections are verified and secure, close the electrical enclosure and restore power to the circuit.

Always consult a qualified electrician for installation if you are unsure or lack experience with electrical wiring.

5. Instruções de operação

To set the time and program the switching schedule:

1. Definir hora atual: Rotate the analog dial clockwise until the current time aligns precisely with the reference arrow or marker on the device's face.
2. Program Switching Times: The dial features small segments around its perimeter. Push in the segments corresponding to the times you want the connected circuit to be ON. Pull out segments for OFF periods. Each segment typically represents a 15-minute interval.
3. Operating Mode (if applicable): If your model includes a manual override switch (e.g., ON, AUTO, OFF), ensure it is set to "AUTO" for programmed operation.

The internal power reserve will automatically charge when the device is powered, ensuring continued accurate timekeeping during short power outage.

6. Manutenção

The AD1NO-R-15m is designed for minimal maintenance. Follow these guidelines to ensure optimal performance:

• Limpeza: Keep the device clean and free from dust. Use a dry, soft cloth for cleaning. Do not use liquid cleaners, abrasive materials, or solvents.
• Inspeção: Periodically inspect the wiring connections for tightness and any signs of wear, corrosion, or damage. Ensure all terminals are secure.
• Condições ambientais: Assegure-se de que o ambiente operacional permaneça dentro das faixas de temperatura e umidade especificadas para evitar danos.

There are no user-serviceable parts inside this device. Do not attempt to open the casing, pois isso anulará a garantia e poderá expô-lo a riscos elétricos.

7. Solução De Problemas

If you encounter issues with your AD1NO-R-15m switch, refer to the table below for common problems and solutions:

If the problem persists after attempting these solutions, please contact ABB customer support for further assistance.

8. Especificações técnicas

• Modelo: AD1NO-R-15m
• Número da peça: 2CSM222461R1000
• Fabricante: FIG
• Tipo: Interruptor horário analógico
• Switching Interval: 15 minutos
• Canais: 1 Normalmente aberto (NÃO)
• Reserva de energia: Sim
• Peso do item: Aproximadamente 2.82 onças (80 gramas)
• Dimensões do produto: Aproximadamente 3.54 x 0.69 x 2.6 polegadas (90 x 17.5 x 66 mm)
• Tipo de montagem: DIN Rail (Wall Mount)
• Componentes incluídos: Modular device switch
• Pilhas necessárias: No (features internal power reserve)
• ASIN: B09BP4PFMF
• Primeiro disponível: 21 de dezembro de 2024

Nota: As especificações estão sujeitas a alterações sem aviso prévio.

9. Garantia e Suporte

Informações de garantia

For detailed warranty terms and conditions, please refer to the official ABB warranty statement provided with your purchase or visit the official ABB website. Guarde o comprovante de compra para solicitações de garantia.

Suporte ao cliente

For technical assistance, troubleshooting, or service inquiries, please contact ABB customer support through their official website ou as informações de contato fornecidas na embalagem do seu produto.

ABB Official Website: www.abb.com