LEDVANCE 65636
Sylvania 32ft RGB Flexible Light Strip Starter Kit Instruction Manual
Modelo: 65636 | Marca: LEDVANCE
Informações importantes de segurança
- Somente para uso interno: This product is designed for indoor use in dry locations. Do not expose to water or high humidity.
- Segurança elétrica: Ensure the power adapter is connected to a suitable power outlet. Do not overload electrical circuits.
- Instruções de corte: The LED strips can be cut for customized length. Only cut along the designated markings to avoid damaging the strip.
- Instalação: Sempre desconecte a energia antes da instalação ou manutenção.
- Aquecer: Do not cover the LED strips with materials that may trap heat, as this can cause overheating.
- Crianças: Mantenha o produto e seus componentes fora do alcance das crianças.
Conteúdo da embalagem
Verifique se todos os componentes estão presentes no seu pacote:
- (2) 16.4ft RGB Flexible LED Light Strips
- (1) Fonte de Alimentação
- (1) IR Remote Controller (with battery included)
- (20) Clipes de montagem
Image: Main product image showing the light strips, remote, power adapter, and clips.
Configuração e instalação
- Prepare a superfície: Ensure the installation surface is clean, dry, and smooth for optimal adhesion of the clips.
- Conectar componentes: Connect the LED light strips to the controller, ensuring the arrows on the connectors align. Then, connect the power supply to the controller.
- Funcionalidade de teste: Before permanent mounting, plug in the power supply and use the remote control to test the light strips. Verify all colors and modes function correctly.
- Personalizar o comprimento (opcional): If a shorter length is desired, only cut the LED strips along the designated cutting marks (usually indicated by a scissor icon or copper pads). Cutting elsewhere will damage the strip.
- Mount the Strips: Remove the adhesive outer layer from the back of the mounting clips and press firmly for five seconds when mounting. Use the provided clips to secure the light strips in your desired location, such as under cabinets, behind TVs, or along shelves.
- Ativar Remoto: Remove the plastic tab from the remote control's battery door to activate the battery.
Image: Step-by-step diagram illustrating how to connect the light strips, identify cutting points, and mount them using clips.
Operação
The Sylvania RGB Flexible Light Strips are controlled using the included IR remote. Ensure the remote is pointed towards the IR receiver on the controller for optimal response.
Funções do controle remoto:
- LIGADO/DESLIGADO: Power the light strips on or off.
- Seleção de cores: Escolha entre 16 cores estáticas usando os botões de cor.
- Escurecimento: Adjust the brightness of the selected color or dynamic mode.
- Modos dinâmicos: Select from 4 pre-programmed dynamic modes (e.g., Flash, Strobe, Fade, Smooth) to create different lighting effects.
Image: Detailed illustration of the IR remote control, highlighting buttons for power, color selection, dimming, and dynamic modes.
Manutenção
- Limpeza: Gently wipe the LED strips with a dry, soft cloth. Do not use liquid cleaners or abrasive materials.
- Vida útil: The LED technology provides a long operational life of up to 30,000 hours under normal use conditions.
- Substituição remota da bateria: If the remote control becomes unresponsive, replace the CR2025 lithium coin cell battery.
Solução de problemas
| Problema | Possível causa | Solução |
|---|---|---|
| As luzes não acendem. | Power connection issue, remote battery dead, IR receiver blocked. | Check all connections (power supply, controller, strips). Ensure arrows on connectors align. Replace remote battery. Ensure remote is pointed at the IR receiver without obstruction. |
| O controle remoto não responde. | Remote battery dead, remote too far, IR receiver blocked. | Replace remote battery. Ensure remote is within range and pointed directly at the IR receiver. Remove any obstructions between the remote and receiver. |
| Some sections of the light strip are not lighting up. | Damaged section, incorrect cutting. | Inspect the strip for physical damage. If a section was cut incorrectly, it may be permanently damaged. Ensure connections are secure. |
Especificações
| Recurso | Detalhe |
|---|---|
| Número do modelo | 65636 |
| Marca | LEDVANCE (Silvânia) |
| Cor | RGB (16 colors) + White |
| Comprimento | 32ft (2 x 16.4ft strips) |
| Uso | Somente em ambientes internos |
| Características especiais | Color Changing, Dimmable, Energy Efficient |
| Tipo de fonte de luz | LIDERADO |
| Fonte de energia | Elétrico com fio |
| Tipo de controlador | Controle Remoto IR |
| Volumetage | 12 Volts |
| O quetage | 24 watts |
| Conectividade | Infravermelho |
| Material | Plástico |
| Peso do item | 10.88 onças |
| Vida útil | Até 30,000 horas |
| Resistência à água | Não resistente à água |
| UPC | 046135656361 |
Garantia e Suporte
This Sylvania LED Flexible Light Strip Starter Kit is backed by a Garantia do fabricante de 1 anos.
For technical support, warranty claims, or additional product information, please visit the official LEDVANCE website ou entre em contato com o departamento de atendimento ao cliente.
Você também pode visitar o Loja LEDVANCE na Amazon Para mais produtos e informações.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.