Flysky FS-i6X 10-Channel 2.4GHz RC Transmitter and X6B Receiver User Manual

1. Introdução

Thank you for choosing the Flysky FS-i6X 10-Channel 2.4GHz RC Transmitter and X6B Receiver. This system utilizes Flysky's Automatic Frequency Hopping Digital System Second Generation (AFHDS 2A) protocol, providing reliable and interference-free control for various RC models, including fixed-wing aircraft, gliders, helicopters, and multi-rotors. This manual provides essential information for the proper setup, operation, and maintenance of your RC system.

2. Conteúdo da embalagem

Please inspect the package contents to ensure all items are present and undamaged:

• Flysky FS-i6X 10-Channel 2.4GHz Transmitter
• Flysky X6B i-BUS Receiver
• Plugue de Ligação
• Manual do usuário (este documento)

3. Configuração

3.1 Instalação da Bateria do Transmissor

The FS-i6X transmitter requires four (4) AA batteries (1.5V each) for operation. Ensure correct polarity when inserting the batteries.

1. Abra a tampa do compartimento da bateria na parte traseira do transmissor.
2. Insert four 1.5V AA batteries, observing the polarity markings (+/-).
3. Feche bem a tampa do compartimento da bateria.

3.2 Receiver Connection (X6B)

The X6B receiver is designed for multi-rotor applications and supports PWM, PPM, and i-BUS outputs. Connect the receiver to your flight controller or servos as follows:

• Saída PWM: Connect individual servos or ESCs to channels 1-6 on the receiver.
• PPM Output: Connect the PPM output port to your flight controller's PPM input. This provides 8 channels over a single wire.
• i-BUS Output: Connect the i-BUS port to your flight controller's serial input. This provides 18 channels and telemetry data over a single wire.

Imagem: Flysky X6B i-BUS Receiver board. This image shows the compact blue circuit board of the X6B receiver, featuring dual antennas for improved signal reception, and clearly labeled ports for PPM, i-BUS, and individual PWM channels (CH1-CH6) for connecting to a flight controller or servos.

3.3 Binding Transmitter and Receiver

Binding is the process of linking the transmitter to the receiver, allowing them to communicate exclusively. Ensure both devices are powered off before starting.

1. Insert the binding plug into the 'BIND' port on the X6B receiver.
2. Connect power to the receiver. The receiver's LED should flash rapidly, indicating it is in binding mode.
3. While holding down the 'BIND' button on the FS-i6X transmitter, power on the transmitter.
4. The transmitter's screen should display 'Binding...' or similar. Release the 'BIND' button on the transmitter once the binding process begins.
5. Once the receiver's LED turns solid, the binding is complete.
6. Power off both the receiver and the transmitter.
7. Remove the binding plug from the receiver.
8. Power on the transmitter first, then the receiver. The receiver's LED should now be solid, indicating a successful connection.

4. Instruções de operação

4.1 Ligar/Desligar

To power on the transmitter, press and hold the power button until the LCD screen illuminates. To power off, press and hold the power button again until the screen turns off.

4.2 Transmitter Layout and Controls

Imagem: Flysky FS-i6X RC Transmitter front view. This image displays the front of the FS-i6X transmitter, highlighting its dual stick controls (gimbals), various switches (SWD, SWC, SWB, SWA), rotary knobs (VRB, VRA), and the central LCD screen for menu navigation and displaying flight data.

The FS-i6X transmitter features two primary control sticks (gimbals), several switches, and rotary knobs for controlling your RC model. The LCD screen and navigation buttons allow access to the system's settings.

• Analógico esquerdo (Modo 2): Controls Throttle (vertical) and Rudder (horizontal).
• Analógico direito (Modo 2): Controls Elevator (vertical) and Aileron (horizontal).
• Switches (SWA, SWB, SWC, SWD): Typically used for flight modes, gear, or auxiliary functions.
• Rotary Knobs (VRA, VRB): Used for fine-tuning or proportional control of auxiliary channels.
• Tela LCD: Displays current settings, telemetry data, and menu options.
• Botões de navegação: Utilizado para navegar pelos menus e ajustar as configurações.

4.3 Navegação e configurações do menu

Use the 'OK' button to enter the main menu and the 'UP'/'DOWN' buttons to scroll through options. The 'CANCEL' button typically returns to the previous screen or exits the menu.

• Configuração do sistema: Configure model type, channel assignments, and system settings.
• Funções: Adjust sub-trims, endpoints, dual rates, and exponential settings.
• Mostrar: Monitor channel outputs and telemetry data (if available and configured).

5. Manutenção

Proper maintenance ensures the longevity and reliable performance of your Flysky FS-i6X system.

• Limpeza: Use um pano macio e seco para limpar o transmissor e o receptor. Evite usar solventes ou produtos de limpeza abrasivos.
• Armazenar: Store the transmitter and receiver in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries from the transmitter if storing for extended periods.
• Cuidados com a antena: Ensure the receiver antennas are not bent sharply or damaged. For optimal performance, position them at a 90-degree angle to each other.
• Atualizações de firmware: Periodically check the Flysky official website for firmware updates for your FS-i6X transmitter. Updates can improve performance and add new features. The FS-i6X supports online updates.

6. Solução De Problemas

If you encounter issues with your FS-i6X system, refer to the following common problems and solutions:

7. Especificações

7.1 Flysky FS-i6X RC Transmitter

7.2 Flysky X6B i-BUS Receiver

Note: The FS-i6X transmitter is also compatible with other Flysky receivers such as FS-iA6B, FS-iA10B, and FS-A8S, which may have different specifications. This manual focuses on the X6B receiver included with this specific product variant.

8. Garantia e Suporte

For warranty information and technical support, please refer to the documentation provided by your retailer or contact Flysky customer service directly. Keep your proof of purchase for warranty claims.