Introdução
Thank you for choosing the SAMCON SBE-C-1 DC LED Light with Switch. This energy-efficient LED light is designed for various DC applications, providing bright and reliable illumination. Please read this manual carefully before installation and operation to ensure safe and optimal performance.
Instruções importantes de segurança
- Desconecte a energia antes da instalação ou manutenção.
- This product is designed for DC (Direct Current) power sources only. Ensure the power supply matches the product's voltage requisitos.
- Do not expose the light to excessive moisture or extreme temperatures.
- Handle the LED board with care to avoid damage to components.
- Ensure proper polarity when connecting wires (red for positive, black for negative). Incorrect polarity can damage the device.
- Installation should be performed by a qualified individual if you are unsure.
Conteúdo da embalagem
- 1 x SAMCON SBE-C-1 DC LED Light with Switch
Produto acimaview
The SAMCON SBE-C-1 is a compact and energy-efficient DC LED light featuring an integrated switch for convenient operation. It consists of an LED board with multiple LED chips, a control component, and pre-attached power wires.
Figura 1: Frente view of the SAMCON SBE-C-1 DC LED Light board, displaying the array of LED chips, the SAMCON brand name, model number SBE-C-1, and the attached red (positive) and black (negative) power wires.
Figura 2: Voltar view of the SAMCON SBE-C-1 DC LED Light board, revealing a metallic heat sink plate designed for thermal management, with two visible screw holes for mounting.
Instruções de instalação
- Prepare a superfície de montagem: Choose a suitable, flat surface for mounting the LED light. Ensure the surface can support the light and is free from obstructions.
- Fixe a luz LED: Use appropriate screws (not included) to secure the LED board to the chosen surface through the mounting holes. Refer to Figure 2 for the location of mounting holes on the back plate.
- Conecte a energia:
- Identify the positive (+) and negative (-) terminals of your DC power source.
- Conecte o fio vermelho from the LED light to the terminal positivo (+) of your DC power source.
- Conecte o fio preto from the LED light to the terminal negativo (-) of your DC power source.
- Warning: Ensure correct polarity to prevent damage to the LED light.
- Verifique as conexões: Verifique novamente todas as conexões para garantir que estejam seguras e corretamente polarizadas.
Instruções de operação
- Ligar: Once the LED light is securely installed and correctly wired to a compatible DC power source, apply power to the circuit.
- Use o Switch: The SAMCON SBE-C-1 features an integrated push-button switch. Press the switch to turn the LED light ON. Press it again to turn the LED light OFF.
Manutenção
- Limpeza: Gently wipe the LED light with a soft, dry cloth to remove dust. Do not use abrasive cleaners or solvents.
- Inspeção: Periodically check the wiring for any signs of wear or damage. Ensure mounting screws remain tight.
- Gerenciamento de calor: Ensure adequate airflow around the back of the LED board (heat sink) to prevent overheating, especially during prolonged use.
Solução de problemas
| Problema | Possível causa | Solução |
|---|---|---|
| A luz não acende | Sem fonte de alimentação | Check if the DC power source is active. |
| A luz não acende | Polaridade de fiação incorreta | Verify that the red wire is connected to positive (+) and the black wire to negative (-). |
| A luz não acende | Interruptor com defeito | Ensure the integrated switch is pressed to the ON position. |
| A luz pisca | Fonte de alimentação instável | Ensure a stable DC power source is used. |
| A luz pisca | Conexões soltas | Verifique e aperte todas as conexões dos fios. |
Especificações
| Recurso | Detalhe |
|---|---|
| Marca | Samcon |
| Modelo | SBE-C-1 |
| Tipo de luz | LIDERADO |
| Fonte de luz Wattage | 10 Watts |
| Recurso especial | Eficiência Energética |
| Tipo de controlador | Botão de pressão |
| Cor | Branco |
| Componentes incluídos | Luz |
Garantia e Suporte
For warranty information or technical support, please contact SAMCON customer service through your point of purchase. Keep your purchase receipt as proof of purchase.