1. Introdução
The CONTEC CMS50Q1 Fingertip Pulse Oximeter is a portable, non-invasive device designed for spot-checking of oxygen saturation (SpO2) and pulse rate (PR) through the finger. It is specifically designed for individuals with small fingers, such as children, and is suitable for sports and aviation use. This device is not intended for medical diagnosis or treatment.
Important Note: This device is for Sports or Aviation use only and is not a medical device. Consult a healthcare professional for any medical concerns.
2. Produto acabadoview
2.1 Principais Características
- Small Finger Design: Specifically designed to fit finger diameters greater than 0.2 inch (5mm), making it suitable for children.
- Accurate & Fast Results: Provides quick and precise measurements of SpO2 and pulse rate.
- Tela clara: Features a digital rotatable TFT display showing SpO2 value, pulse rate value, bar graph, and pulse waveform.
- Fácil operação: Simple one-button operation for power on and measurement.
- Design confortável: Fingertip clip made with silica gel material for comfort.
- Bateria de longa duração: Offers 20-30 hours of battery life with automatic power-off after 5 seconds of inactivity.
2.2 O que vem na caixa
- CONTEC CMS50Q1 Pulse Oximeter (Main Unit)
- Cordão
- Manual do usuário
- Adesivos de desenho animado
- Screwdriver (for battery compartment)
2.3 componentes do produto
This image illustrates the various parts of the CMS50Q1 Pulse Oximeter, including the display elements and physical features like the lanyard loop hole and battery cover.
3. Configuração
3.1 Instalação da bateria
- Locate the battery compartment on the back of the oximeter.
- Use the provided screwdriver to loosen the screw on the battery cover.
- Deslize a tampa da bateria para fora.
- Insira duas pilhas AAA (não incluídas) no compartimento, certificando-se da polaridade correta (+/-).
- Replace the battery cover and secure it with the screw using the screwdriver. This screw helps prevent accidental battery access, especially for children.
This image demonstrates the battery installation process and subsequent steps for taking a measurement.
3.2 Fixação do cordão
Thread the thin loop of the lanyard through the lanyard loop hole on the oximeter. Then, pass the larger part of the lanyard through the thin loop and pull gently to secure it. This allows for convenient carrying.
This image shows the device dimensions and how to attach the included lanyard.
4. Instruções de operação
4.1 Fazendo uma medição
- Verifique se o oxímetro tem pilhas instaladas.
- Open the clip of the oximeter.
- Insert one of your fingers (preferably the index finger) into the rubber opening of the oximeter, ensuring the finger is placed correctly and fully inside. The device is designed for finger diameters greater than 0.2 inch (5mm).
- Press the power button once to turn on the oximeter.
- Keep your hand still and avoid movement during the measurement.
- The SpO2 and pulse rate readings will appear on the display within a few seconds.
4.2 Orientação da tela
The display of the CMS50Q1 Pulse Oximeter can rotate automatically to provide optimal viewing from different angles. Simply adjust the device's orientation, and the display will adapt.
This image demonstrates the rotatable display feature of the oximeter.
4.3 Desligamento Automático
The device will automatically power off after approximately 5 seconds of inactivity (when no finger is detected) to conserve battery life.
5. Exibir informações
The TFT display provides the following information:
- SpO2 (%): Nível de saturação de oxigênio no sangue.
- PRbpm: Frequência cardíaca em batimentos por minuto.
- Gráfico de barras: Uma representação visual da intensidade do pulso.
- Forma de onda do pulso: A graphical representation of the pulse.
- Indicador de bateria fraca: An icon indicating when batteries need replacement.
This image shows a typical display reading with SpO2, PRbpm, and the pulse waveform.
6. Manutenção e Cuidados
6.1 Limpeza do Oxímetro
- Clean the surface of the oximeter before and after each use with a soft cloth dampfinalizado com álcool medicinal (70% de etanol ou isopropanol).
- Do not immerse the device in water or other cleaning solutions.
- Certifique-se de que o dispositivo esteja completamente seco antes de reutilizá-lo.
6.2 Substituição da bateria
When the low battery indicator appears on the display, replace the batteries promptly. Follow the battery installation steps in Section 3.1.
6.3 Armazenamento
Store the oximeter in a cool, dry place away from direct sunlight, extreme temperatures, and humidity. If the device will not be used for an extended period, remove the batteries to prevent leakage.
7. Solução De Problemas
| Problema | Possível causa | Solução |
|---|---|---|
| Sem exibição após ligar | As pilhas estão descarregadas ou instaladas incorretamente. | Replace batteries or reinstall them with correct polarity. |
| Display shows '---' or unstable readings | Finger not inserted properly; excessive movement; cold finger; nail polish. | Reinsert finger correctly; remain still; warm the finger; remove nail polish. |
| Dispositivo desliga automaticamente | Normal auto-off function (5 seconds inactivity) or low battery. | This is normal behavior. If unexpected, check battery level. |
| Difficulty opening battery cover | Screw is too tight or cover is stiff. | Use the provided screwdriver. Apply gentle, even pressure to slide the cover after unscrewing. |
8. Especificações
- Dimensões do produto: 2.32 x 1.42 x 1.38 polegadas
- Peso do item: 3.52 onças
- Measuring Range SpO2: 70-100%
- Measuring Range Pulse Rate: 0-250 bpm
- Duração da bateria: Aproximadamente 20-30 horas
- Fonte de energia: 2 pilhas AAA (não incluídas)
- Desligamento automático: Após 5 segundos de inatividade
- Fabricante: Contec Medical Systems Co.,Ltd
9. Informações de segurança
- Este dispositivo destina-se exclusivamente ao uso em esportes e aviação. Não é um dispositivo médico e não deve ser usado para diagnóstico ou tratamento médico.
- Do not use the oximeter during sports activities, as movement can affect accuracy.
- Keep the device out of reach of small children to prevent choking hazards from small parts like batteries or the lanyard.
- Avoid exposing the device to direct sunlight, high temperatures, or moisture.
- Do not attempt to repair or modify the device yourself. Contact support if issues arise.
10. Informações de suporte
For technical support or inquiries regarding your CONTEC CMS50Q1 Pulse Oximeter, please contact the manufacturer using the details below:
- Telefone de Suporte Técnico: +86-335-8015431
- E-mail: contecmed@contecmed.com.cn
- Website: http://www.contecmed.com
Please refer to the official CONTEC webConsulte o site ou a documentação de compra para obter os termos e condições específicos da garantia.