Kuvings REVO830 Whole Slow Juicer Instruction Manual

1. Introdução

This manual provides essential information for the safe and efficient operation of your Kuvings REVO830 Whole Slow Juicer. Please read all instructions carefully before use and retain this manual for future reference.

The Kuvings REVO830 is a cold press masticating juicer designed to extract juice from various fruits and vegetables with minimal oxidation, preserving nutrients and flavor. Its dual-sized chutes and auto-cutting screw are engineered for convenience and efficiency.

2. Informações importantes de segurança

AVISO: Para reduzir o risco de incêndio, choque elétrico ou ferimentos, siga sempre as precauções básicas de segurança.

• Leia todas as instruções antes de operar o aparelho.
• Não mergulhe a base do motor em água ou outros líquidos.
• Mantenha as mãos e os utensílios fora da calha de alimentação durante o funcionamento para evitar ferimentos.
• Ensure all parts are correctly assembled before turning on the juicer.
• Desligue o aparelho da tomada quando não estiver em uso, antes de montar ou desmontar peças e antes de limpar.
• Não opere nenhum aparelho com o cabo ou plugue danificado, ou após o aparelho apresentar mau funcionamento ou ter sido danificado de qualquer forma.
• Este aparelho é somente para uso doméstico.

3. Produto acabadoview e Componentes

Familiarize yourself with the various parts of your Kuvings REVO830 Whole Slow Juicer.

Figure 3.1: Assembled Kuvings REVO830 Whole Slow Juicer.

Figure 3.2: All components of the Kuvings REVO830 Whole Slow Juicer.

Componentes incluídos:

• Base do motor
• Tigela de suco
• Auger (Auto-cutting screw)
• Juicing Strainer (for juice)
• Smoothie/Sorbet Attachment (blank strainer)
• Lid with Dual Feed Chutes (88mm & 48mm)
• Copo de Polpa
• Copa do suco
• Cleaning Tool Set (brushes)

4. Configuração e montagem

Before first use, wash all removable parts with warm, soapy water. Rinse thoroughly and dry.

Etapas de montagem:

1. Coloque o Tigela de suco para o Base do motor, aligning the red dots on both parts. Turn clockwise until it locks into place.
2. Insira o Coador de suco (or Smoothie/Sorbet Attachment) into the juicing bowl. Ensure it sits firmly.
3. Coloque o Trado into the center of the strainer, twisting it gently until it drops into position.
4. Posicione o Tampa onto the juicing bowl, aligning the red dot on the lid with the red dot on the juicing bowl. Turn clockwise until it locks securely.
5. Coloque o Copo de Polpa under the pulp outlet and the Copa do suco under the juice outlet.

5. Instruções de operação

Preparação:

• Lave bem todas as frutas e verduras.
• For best results and to prevent clogging, cut fibrous ingredients (like celery or kale) into smaller pieces. Harder ingredients like carrots or apples can often be fed whole into the larger chute.
• Remove hard pits from fruits (e.g., peaches, plums) and thick peels (e.g., citrus, pineapple).

Processo de suco:

1. Ensure the juice cap on the juice outlet is closed if you wish to mix juices within the bowl before dispensing.
2. Plug in the juicer and press the 'FORWARD' button to start.
3. Slowly feed prepared ingredients into either the 88mm or 48mm feed chute. The auto-cutting screw will process the ingredients.
4. For leafy greens or softer fruits, alternate with harder ingredients to help push them through and maximize extraction.
5. If ingredients become jammed, press the 'REVERSE' button for a few seconds, then release and press 'FORWARD' again. Repeat if necessary.
6. Once juicing is complete, open the juice cap to dispense the juice into the juice cup.

Using Smoothie/Sorbet Attachment:

Replace the juicing strainer with the Smoothie/Sorbet Attachment during assembly. This attachment is designed for making thicker concoctions like smoothies or sorbets from frozen fruits. Follow the general operating instructions, ensuring the juice cap is open for continuous dispensing.

6. Manutenção e Limpeza

Regular cleaning ensures optimal performance and longevity of your juicer. It is recommended to clean the juicer immediately after each use.

Desmontagem para Limpeza:

1. Desligue o espremedor da tomada.
2. Turn the lid counter-clockwise to unlock and remove it.
3. Remove the auger, then the strainer, and finally the juicing bowl from the motor base.

Etapas de limpeza:

• Rinse all removable parts (lid, auger, strainer, juicing bowl, pulp cup, juice cup) under running water.
• Use the provided cleaning brushes to remove any pulp residue from the strainer and other components. The specialized brush is particularly effective for the fine mesh of the strainer.
• Wash parts with warm, soapy water.
• Enxágue bem e deixe todas as peças secarem completamente ao ar livre antes de remontá-las ou guardá-las.
• A base do motor deve ser limpa com um pano.amp pano. Nunca mergulhe a base do motor em água.
• The juicer parts are Não pode ser lavado na máquina de lavar louça.. Hand wash only.

7. Solução De Problemas

If you encounter issues with your Kuvings REVO830, refer to the following common problems and solutions:

8. Especificações

• Marca: Kuving
• Modelo: REVO830
• Cor: Preto fosco
• Recurso especial: Motor potente
• Dimensões do produto: 10"P x 19"L x 8"A
• Material: ULTEM, ECOZEN, Stainless Steel
• Potência máxima: 240 Watts
• Fonte de energia: Elétrico com fio
• Volumetage: 120 Volts
• Instruções de cuidados com o produto: Só lavar as mãos
• Material da lâmina: Aço inoxidável
• Capacidade: 3.5 pés cúbicos
• Peso do item: 18 libras
• Usos recomendados: Apple, Beetroot, Carrot, Celery, Fruits, Nuts, Vegetables
• Código UPC: 853447004908

9. Garantia e suporte

Informações sobre garantia:

Your Kuvings REVO830 Whole Slow Juicer comes with a Garantia limitada de 15 anos. This warranty covers defects in materials and workmanship under normal household use. Please refer to the warranty card included with your product for full terms and conditions.

Suporte ao cliente:

For any questions, technical assistance, or warranty claims, please contact Kuvings customer service. Contact information can typically be found on the Kuvings official website ou na embalagem do produto.