1. Produto acabadoview
The WALI DOW-SOL Solar Fake Security Camera is designed to provide a visual deterrent against potential intruders. This wireless dummy dome camera simulates the appearance and function of a real surveillance camera, featuring a flashing red LED light. It operates using dual power sources: an integrated solar panel for charging during daylight and two AA batteries (not included) for continuous operation, especially during nighttime or low-light conditions. Its weatherproof construction allows for both indoor and outdoor installation.
Figura 1: Frente view of the WALI Solar Fake Security Camera.
Vídeo 1: Acabouview of the WALI Solar Powered Fake Security Camera, demonstrating its features and installation.
2. Conteúdo da embalagem
Verifique se todos os componentes estão presentes antes de prosseguir com a instalação.
- 1 x WALI Dome Simulation Camera (White)
- 3 x Parafusos de montagem
- 3 x Âncoras de parede
- 1 x Warning Security Alert Sticker Decal
- Note: 2 pcs AA batteries are required and are NOT included.
Figure 2: Diagram showing the included components and product dimensions.
3. Configuração e instalação
Follow these steps for proper installation of your WALI Solar Fake Security Camera.
- Prepare a câmera: Gently rotate the camera section to access the battery compartment.
- Instale as baterias: Insert two (2) AA batteries (not included) into the battery compartment, ensuring correct polarity. Close the compartment securely.
- Selecione o local de montagem: Choose a suitable location for installation. The camera can be mounted indoors or outdoors. For optimal solar charging, select a spot that receives direct sunlight for several hours daily.
- Marque os pontos de perfuração: Hold the camera's mounting base against the desired surface and mark the positions for the three screw holes using a pencil.
- Furos piloto de perfuração: Drill pilot holes at the marked points. If mounting on a masonry or concrete surface, insert the provided wall anchors into the pilot holes.
- Monte a câmera: Align the camera's mounting base with the drilled holes. Secure the camera to the wall or ceiling using the provided screws.
- Ajustar ângulo: Adjust the camera's angle to the desired position. The camera offers a ±90° tilt adjustment.
- Apply Warning Sticker: Place the warning security alert sticker decal in a visible location near the dummy camera to enhance its deterrent effect.
Figure 3: Visual guide for battery insertion and mounting the camera.
Figure 4: Illustrates the adjustable tilt feature of the camera.
4. Operação
The WALI Solar Fake Security Camera is designed for simple, continuous operation.
- LED piscando: Once batteries are installed, the red LED light on the front of the camera will begin to flash, simulating active surveillance.
- Energia solar: The integrated solar panel charges the installed AA batteries during daylight hours, extending battery life and ensuring continuous operation.
- Bateria de reserva: When solar power is insufficient (e.g., at night or on cloudy days), the camera automatically draws power from the AA batteries.
- Projeto à prova de intempéries: The camera's IP65 water-resistant rating ensures reliable performance in various weather conditions, including rain and sun exposure.
Figure 5: Depicts the dual power operation (solar and battery).
Figure 6: Close-up of the flashing red LED light, enhancing realism.
5. Manutenção
To ensure optimal performance and longevity of your dummy camera, follow these simple maintenance guidelines:
- Painel solar limpo: Limpe periodicamente o painel solar com um pano macio e seco.amp Use um pano para remover poeira, sujeira ou detritos que possam obstruir a luz solar e reduzir a eficiência do carregamento.
- Verifique as baterias: Although solar-powered, it is recommended to check the AA batteries every 6-12 months, especially if the flashing LED appears dim or stops working. Replace with fresh batteries if needed.
- Inspecione a montagem: Occasionally check that the camera is securely mounted and that screws are tight.
- Exterior limpo: Wipe the camera's exterior with a soft, dry cloth to keep it clean. Avoid using harsh chemicals or abrasive cleaners.
6. Solução De Problemas
| Problema | Possível causa | Solução |
|---|---|---|
| LED não pisca |
|
|
| Camera appears loose after installation |
|
|
| O painel solar não carrega de forma eficaz |
|
|
7. Especificações
| Recurso | Detalhe |
|---|---|
| Marca | WALI |
| Nome do modelo | Dummy Camera (DOW-SOL) |
| Tecnologia de Conectividade | Wireless (Simulated) |
| Recurso especial | Built-in Flashing Red LED Light, Solar Powered |
| Uso interno/externo | Interior, Exterior |
| Tipo de montagem | Montagem na parede |
| Cor | Branco |
| Fator de forma | Cúpula |
| Nível de resistência à água | Resistente à água (IP65) |
| Fonte de energia | Solar Powered, 2x AA Batteries (not included) |
| Dimensões do item (C x L x A) | 7.36 x 5.21 x 4.9 polegadas |
| Peso do item | 0.34 quilos |
| UPC | 811278025721 |
8. Garantia e suporte
Garantia do fabricante: This WALI product comes with a 12-month warranty from the date of purchase, covering defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
Suporte ao cliente: For any questions, assistance with installation, or troubleshooting, please contact WALI customer support. Experienced and friendly US-based customer support is available to assist 7 days a week.
For more information, visit the official WALI webPara obter os detalhes de contato, consulte o site ou a documentação da sua compra.