ROIDMI EVE CC Robot Vacuum and Mop User Manual

Introdução

The ROIDMI EVE CC Robot Vacuum and Mop is an advanced cleaning device designed to automate floor maintenance. It combines powerful vacuuming with efficient mopping capabilities, featuring intelligent navigation and a self-emptying dustbin for enhanced convenience.

Guia de configuração

1. Desembalagem e verificação de componentes

Retire cuidadosamente todos os componentes da embalagem. Certifique-se de que os seguintes itens estejam presentes:

• ROIDMI EVE CC Robot Vacuum and Mop
• Auto-Emptying Station
• Cabo de energia
• Side Brush (if not pre-installed)
• Mop Pad and Water Tank
• Manual do usuário (este documento)

2. Posicionamento da estação de carregamento

Place the auto-emptying station against a wall in an open area, ensuring at least 0.5 meters of clear space on both sides and 1.5 meters in front. Avoid placing it near stairs or heat sources. Connect the power cable to the station and plug it into a wall outlet.

3. Carregamento inicial

Place the robot onto the charging station. Ensure the charging contacts align. The robot will begin charging automatically. For first use, fully charge the robot, which may take several hours.

Image: The ROIDMI EVE CC robot vacuum docked with its auto-emptying station, alongside a smartphone displaying the control app interface.

4. Instalação e pareamento do aplicativo

Download the ROIDMI or Mijia app from your device's app store. Follow the in-app instructions to create an account and pair your ROIDMI EVE CC robot. This will enable smart control features, including mapping, scheduling, and cleaning mode selection.

Instruções de operação

1. Modos de limpeza

The ROIDMI EVE CC offers versatile cleaning modes:

• Aspiração: Utilizes 4000 Pa suction power to effectively pick up dust, debris, pet hair, and fine particles from various floor types.
• Esfregar: The integrated 250ml water tank and mop pad allow for simultaneous sweeping and mopping, providing a deeper clean for hard floors.
• Sweep & Mop 2-in-1: This combined mode allows the robot to vacuum and mop concurrently, optimizing cleaning efficiency.

Image: The robot vacuum demonstrating its powerful 4000 Pa suction, capable of collecting various types of debris including dust, hair, crumbs, cat litter, and pet food.

2. LDS Laser Navigation

Equipped with a new generation LDS laser navigation system, the robot precisely scans your home environment to create accurate maps. This technology enables efficient route planning, obstacle avoidance, and prevents entanglement or pinching.

Image: The robot vacuum utilizing its LDS laser navigation system to intelligently map and navigate a living room environment, ensuring comprehensive coverage.

3. Automatic Dust Collection

The 2.5-liter auto-emptying station automatically transfers collected dirt from the robot's dustbin into a sealed dust bag, providing up to 60 days of hands-free operation. This system includes an antibacterial and deodorizing ozone technology to minimize odors.

Image: The auto-emptying station of the ROIDMI EVE CC, highlighting its 2.5L large capacity dust bag for extended hands-free operation.

4. Controle por aplicativo inteligente

Control your robot remotely via the ROIDMI or Mijia app. Features include:

• Quick and accurate map creation (within 5 minutes).
• Customized cleaning plans and scheduled cleaning.
• Setting virtual walls and restricted zones to prevent the robot from entering specific areas.
• Monitoring cleaning progress and history.

Image: The ROIDMI EVE CC robot vacuum alongside a smartphone displaying the app interface, which allows for quick mapping and intelligent control of cleaning parameters.

Image: Demonstration of the virtual wall feature, allowing users to define restricted areas that the robot will avoid during cleaning.

5. Obstacle Avoidance and Fall Prevention

The robot is designed to accurately identify obstacle shapes and make decisions to avoid them, reducing the risk of entanglement. It also features fall prevention sensors to detect stairs and prevent falls.

Image: The robot vacuum performing edge cleaning along a wall and demonstrating its fall prevention capabilities near a step, along with its ability to climb obstacles up to 17mm.

Manutenção

Regular maintenance ensures optimal performance and extends the lifespan of your ROIDMI EVE CC. Always turn off the robot and disconnect the charging station from power before performing any maintenance.

1. Substituição do saco de pó

The 2.5L dust bag in the auto-emptying station should be replaced approximately every 60 days, or when the app indicates it is full. Open the station's lid, remove the full bag, and insert a new one, ensuring it is properly sealed.

2. Water Tank and Mop Pad Cleaning

After each mopping session, remove the mop pad and wash it thoroughly. Empty any remaining water from the 250ml water tank and allow it to air dry to prevent mold or odors.

3. Limpeza da escova principal e da escova lateral

Regularly check the main brush and side brush for tangled hair or debris. Use the cleaning tool provided to cut and remove any tangled hair. Ensure the brushes spin freely.

4. HEPA Filter Cleaning

Tap the HEPA filter gently to remove accumulated dust. Do not wash the HEPA filter with water, as this can damage it. Replace the filter every 3-6 months depending on usage.

5. Limpeza do sensor

Wipe all sensors (cliff sensors, wall sensors, charging contacts) on the robot and charging station with a clean, dry cloth to ensure proper functionality and navigation.

Solução de problemas

If you encounter issues with your ROIDMI EVE CC, refer to the following common solutions:

• Robô não está carregando: Ensure the charging contacts on both the robot and station are clean and aligned. Check if the power cable is securely plugged in.
• Robô preso ou perdido: Clear any obstacles around the robot. If it's lost, manually place it back on the charging station or restart it from the app.
• Má sucção: Check if the dustbin is full or the dust bag needs replacement. Clean the main brush and HEPA filter.
• A limpeza com esfregão não é eficaz: Certifique-se de que o reservatório de água esteja cheio e que o pano do esfregão esteja limpo e bem encaixado.
• Problemas de conectividade do aplicativo: Ensure your Wi-Fi network is stable and the robot is within range. Restart the app and the robot.

For more detailed troubleshooting or persistent issues, consult the ROIDMI app's help section or visit the official ROIDMI support website.

Especificações

Garantia e Suporte

For warranty information, please refer to the warranty card included with your product or visit the official ROIDMI website. Information regarding spare parts availability may vary by region.

For technical support, product inquiries, or service requests, please contact ROIDMI customer service through their official website ou as informações de contato fornecidas na embalagem do produto.