RunCam Spotter V2 FPV Camera and Transmitter Kit User Manual

1. Introdução

The RunCam Spotter V2 Micro FPV AIO Camera is an integrated camera and video transmitter (VTX) system designed for First Person View (FPV) applications in various remote-controlled vehicles such as RC cars, planes, boats, and drones. This compact unit provides a 700TVL camera with a 170-degree field of view, a 5.8GHz 40-channel adjustable power VTX (20mW-200mW), an integrated microphone, and an On-Screen Display (OSD) for real-time data.

This manual provides essential information for the proper setup, operation, and maintenance of your Spotter V2 FPV Camera and Transmitter Kit.

2. Conteúdo da embalagem

Verifique se todos os itens listados abaixo estão incluídos no seu pacote:

• 1x Spotter V2 Micro FPV AIO Camera (with Cloverleaf antenna)
• 1x XT-60 Power Cable
• 1x Double Sided Tape (one side is Velcro)
• 1x Spare Whip Antenna
• 1x Manual do Usuário (este documento)

3. Especificações

Image: Dimensions of the RunCam Spotter V2 FPV Camera, showing length, width, and height measurements in millimeters.

Image: Illustration of the 170-degree wide-angle lens of the Spotter V2 camera, demonstrating its expansive field of view over a landscape.

4. Configuração

4.1 Montagem da câmera

The Spotter V2 camera is designed to be compact and lightweight, making it suitable for various RC vehicles. Use the provided double-sided tape (Velcro on one side) to securely mount the camera to your RC car, plane, boat, or drone. Ensure the camera has a clear line of sight for optimal FPV experience.

Image: A hand holding the compact RunCam Spotter V2 FPV camera, demonstrating its small size relative to a US quarter coin.

Image: The Spotter V2 FPV camera mounted on top of an RC car, demonstrating a typical installation scenario.

4.2 Conexão de Energia

Connect the provided XT-60 power cable to the camera's power input. The camera supports a 2S-4S LiPo battery (7.4V-14.8V). Ensure correct polarity when connecting the power source to avoid damage to the unit.

The camera's wiring typically consists of:

• Fio vermelho: Positive (+) power input
• Fio preto: Negative (-) power input (Ground)
• Fio Amarelo: Video Out (if applicable, though this is AIO, so video is transmitted wirelessly)

For direct power, connect the red and black wires to your vehicle's battery or a suitable power distribution board within the specified voltage gama.

4.3 Instalação da antena

The Spotter V2 comes with a pre-installed Cloverleaf antenna. A spare Whip antenna is also included. If the Cloverleaf antenna becomes damaged, you can solder the Whip antenna in its place. Ensure the antenna is securely attached and positioned to minimize obstruction for best signal transmission.

5. Instruções de operação

5.1 Ligar e verificação inicial

Once the camera is mounted and powered correctly, connect your FPV goggles or monitor. The camera will power on automatically with your vehicle's power system. You should see the FPV feed on your display device.

Image: The Spotter V2 FPV camera positioned next to an FPV monitor, illustrating the live video feed capability.

Image: The Spotter V2 FPV camera shown with an FPV monitor and goggles, highlighting its broad compatibility with analog FPV receiving equipment.

5.2 Channel and Power Adjustment

The Spotter V2 features a button for frequency adjustment. Refer to the markings on the camera unit for the exact location of the "PRESS" button. Short presses typically cycle through channels, while long presses may cycle through bands or power levels. Consult the on-screen display (OSD) for current channel, band, and power settings.

• Pressão curta: Change channel within the current band.
• Pressão longa: Change band or adjust VTX power (20mW, 200mW).

Ensure your FPV receiver (goggles/monitor) is set to the same band and channel as the Spotter V2 for a clear video feed.

Image: The Spotter V2 FPV camera with its antenna, depicted with signal waves, representing its multi-mode capabilities including adjustable power and multiple channels.

5.3 Exibição na tela (OSD)

The integrated OSD provides real-time information directly on your FPV feed. This may include battery voltage, current channel/band, and other critical flight data. This feature helps in monitoring the system status during operation.

5.4 Microfone integrado

The Spotter V2 includes an integrated microphone, allowing you to hear ambient sounds from your RC vehicle. This enhances the immersive FPV experience. Ensure your FPV receiver supports audio reception.

6. Manutenção

• Limpeza: Keep the camera lens clean using a soft, dry cloth. Avoid abrasive materials or harsh chemicals.
• Cuidados com a antena: Ensure the antenna is not bent or damaged. A damaged antenna can significantly reduce transmission range and video quality. Use the spare whip antenna if the primary antenna is compromised.
• Armazenar: Guarde a câmera em local seco e fresco, longe da luz solar direta e de temperaturas extremas.
• Poder: Always disconnect power when not in use to prevent battery drain and potential damage.

7. Solução De Problemas

8. Garantia e Suporte

The RunCam Spotter V2 FPV Camera and Transmitter Kit comes with a standard manufacturer's warranty. For specific warranty details and duration, please refer to the documentation provided at the time of purchase or contact RunCam customer support directly.

For technical support, troubleshooting assistance beyond this manual, or warranty claims, please visit the official RunCam webou entre em contato com o departamento de atendimento ao cliente. Guarde o comprovante de compra como prova de aquisição.

Fabricante: RunCam

Website: www.runcam.com (This is a placeholder link, please verify the official website para suporte.)