Manual de instruções da iluminação de armário com sensor de movimento recarregável de 10 polegadas da MCGOR

1. Introdução

Thank you for choosing the MCGOR 10-inch Rechargeable Motion Sensor Under Cabinet Lighting. This product is designed to provide convenient, energy-efficient illumination for various indoor spaces such as kitchens, closets, stairs, and hallways. Featuring a motion sensor, dimmable brightness, and easy magnetic installation, these lights enhance visibility and safety.

Image 1.1: MCGOR 10-inch Under Cabinet Lights (2-Pack)

2. Conteúdo da embalagem

Verifique se todos os itens listados abaixo estão incluídos no seu pacote:

• 2 x MCGOR 10-inch Cabinet Lights
• 2 x USB-C Charging Cords
• 6 x Adhesive Iron Plates
• 6 x Parafusos
• 1 x Manual de Instruções

3. Recursos do Produto

• Modo de sensor de movimento: Automatically activates when motion is detected within 120° and 10 feet in low-light conditions, turning off after approximately 20 seconds of no motion.
• Brilho regulável: Features 5 levels of brightness adjustment to suit various lighting needs, from task lighting to a subtle night light.
• Modo sempre ligado: Allows the light to remain continuously on for extended use, suitable for reading or as a flashlight.
• Bateria recarregável: Equipped with a built-in 1800mAh rechargeable battery, easily charged via USB-C. Eliminates the need for frequent battery replacement.
• Fácil instalação: Integrated strong magnets allow direct attachment to iron surfaces. For non-metallic surfaces, use the included adhesive metal plates or screws.

Image 3.1: Feature Comparison

4. Configuração e instalação

The MCGOR under cabinet lights offer two primary installation methods:

4.1 Magnetic Attachment (for Metal Surfaces)

1. Ensure the metal surface is clean and dry.
2. Simply place the light directly onto the ironwork surface. The built-in magnets will secure it in place.

4.2 Adhesive Metal Plates (for Non-Metallic Surfaces)

1. Clean and dry the desired installation surface thoroughly.
2. Peel the protective film from one side of an adhesive iron plate.
3. Stick the adhesive iron plate firmly onto the chosen surface. Apply pressure for 30 seconds to ensure strong adhesion.
4. Allow 24 hours for the adhesive to fully cure before attaching the light.
5. Once the plate is secure, the light can be magnetically attached to the plate.

4.3 Screw Installation (Optional)

For a more permanent installation or on surfaces where adhesive may not hold well (e.g., rough wood, humid environments), use the provided screws to attach the metal plates. The lights can then be magnetically attached to these screwed-in plates.

Image 4.1: Two Installation Methods

5. Instruções de operação

The light features a slide switch and a brightness adjustment button.

Image 5.1: Light Controls Overview

Seleção de 5.1 modos

Use the slide switch to select one of three modes:

• EM: A luz permanecerá acesa continuamente.
• OFF: A luz será desligada.
• CARRO: Activates motion sensor mode. The light will turn on automatically when motion is detected in a dark or low-light environment and turn off after approximately 20 seconds of no motion.

Image 5.2: Motion Sensor and Always-On Modes

5.2 Ajuste de brilho

In either ON or AUTO mode, press and hold the brightness adjustment button (located next to the PIR sensor) to cycle through 5 levels of brightness. Release the button when the desired brightness is reached.

Image 5.3: 5 Levels of Brightness

6. Carregamento

The MCGOR under cabinet light is equipped with a rechargeable 1800mAh battery.

• Porta de carregamento: Localize a porta de carregamento USB-C na lateral da luz.
• Conexão: Connect the provided USB-C charging cord to the light and plug the other end into a standard USB power adapter (not included) or a computer USB port.
• Indicador de carga: The PIR sensor/charging indicator light will illuminate red during charging and turn green when fully charged.
• Duração da bateria: A full charge can last approximately 7-45 days in Motion Sensor Mode (depending on usage frequency) or 8 hours in Always-On Mode at 100% brightness.

Image 6.1: USB-C Charging

7. Manutenção

To ensure optimal performance and longevity of your MCGOR under cabinet light:

• Limpeza: Wipe the light gently with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Exposição à água: This product is not water-resistant. Avoid exposure to water or high humidity.
• Cuidados com a bateria: Recarregue a bateria regularmente, mesmo que não a utilize com frequência, para manter sua saúde. Evite descarregar completamente a bateria por períodos prolongados.

8. Solução De Problemas

9. Especificações

10. Informações de segurança

• Não desmonte nem modifique o produto.
• Mantenha longe da água e de ambientes com alta umidade.
• Não exponha à luz solar direta ou a altas temperaturas.
• Mantenha fora do alcance de crianças.
• Utilize apenas o cabo USB-C fornecido para carregar.
• Avoid looking directly into the LED light source for extended periods.

11. Garantia e Suporte

For warranty information or technical support, please refer to the product packaging or contact MCGOR customer service directly. Contact details are typically available on the manufacturer's official website ou através da sua plataforma de compra.