Piegricdiat N370-F

Piegricdiat Replacement Filters for INSE K370/N370 Cordless Vacuum Cleaners

Model: N370-F

Introdução

This instruction manual provides essential information for the proper installation, maintenance, and care of your Piegricdiat replacement filters. These filters are designed to maintain the performance of your INSE K370 or N370 cordless vacuum cleaner.

Produto acimaview e compatibilidade

The Piegricdiat replacement filter kit includes high-quality HEPA filters designed for specific INSE cordless vacuum cleaner models. These filters are crucial for trapping fine dust and allergens, ensuring efficient cleaning and maintaining air quality.

Importante: These replacement accessories are specifically designed for and compatible with the following models:

  • INSE K370 Cordless Vacuum Cleaner
  • Aspirador de pó sem fio INSE N370

Please verify your vacuum cleaner model before installation to ensure proper fit and function. These filters are não universal.

Nine Piegricdiat replacement filters arranged in a 3x3 grid.

Image: A set of nine Piegricdiat replacement filters. Each filter is circular with a white filter medium and a black plastic frame, featuring a small red tab for easy handling.

Instruções de instalação

Follow these steps to replace the filter in your INSE K370 or N370 cordless vacuum cleaner. No special tools are required for this process.

  1. Desligar: Ensure your vacuum cleaner is turned off and unplugged from any charging source before beginning.
  2. Localize o compartimento do filtro: Identify the filter compartment on your INSE K370/N370 vacuum. Refer to your vacuum's original manual if you are unsure of its location.
  3. Remover filtro antigo: Carefully open the filter compartment. Grasp the old filter, typically by a tab or edge, and pull it out. Dispose of the old filter responsibly.
  4. Inserir novo filtro: Take a new Piegricdiat replacement filter. Ensure the filter is oriented correctly (usually, it will only fit one way). Gently push the new filter into the compartment until it is securely seated.
  5. Fechar Compartimento: Feche bem a tampa do compartimento do filtro.
  6. Teste: Turn on your vacuum cleaner to ensure it operates correctly with the new filter installed.
Diagram showing how to install a filter into an INSE K370/N370 vacuum cleaner.

Image: An illustrative diagram showing two Piegricdiat filters and an arrow pointing towards an INSE K370/N370 cordless vacuum cleaner, indicating the filters are compatible and for installation into the vacuum.

Manutenção e Cuidados

Regular maintenance of your vacuum filters is essential for optimal performance and longevity of your vacuum cleaner. These filters are designed to be washable and reusable.

  • Limpeza: Periodically remove the filter from the vacuum. Tap it gently over a waste bin to dislodge loose dust and debris. For a more thorough cleaning, rinse the filter under cool, running water until the water runs clear.
  • Secagem: Allow the filter to air dry completely for at least 24 hours before reinserting it into the vacuum. Do not use heat to dry the filter, as this can damage the filter material.
  • Frequência de Substituição: For best performance, it is recommended to replace the filters every 3 months, depending on usage frequency and the amount of debris collected. Consistent replacement helps maintain strong suction and efficient filtration.
Close-up of a Piegricdiat filter with text 'WASHABLE & REUSEABLE'.

Imagem: Um close-up view of a single Piegricdiat replacement filter, highlighting its washable and reusable nature. The filter has a white pleated surface and a black plastic rim with a red pull tab.

Solução de problemas

If you experience issues with your vacuum cleaner after installing new filters, consider the following common solutions:

  • Sucção reduzida:
    • Ensure the filter is clean and completely dry. A wet or heavily clogged filter can restrict airflow.
    • Verify the filter is correctly seated in its compartment.
    • Check for blockages in the vacuum's hose or brush roll.
  • Ruídos incomuns:
    • Confirm the filter compartment is securely closed.
    • Ensure the filter is properly installed and not loose.

If problems persist, consult your INSE K370/N370 vacuum cleaner's original user manual or contact the vacuum cleaner manufacturer for further assistance.

Especificações do produto

RecursoDetalhe
MarcaPiegricdiat
Número do modeloN370-F
Dispositivos compatíveisINSE K370, INSE N370 Cordless Vacuum Cleaners
MaterialPaper, Plastic (HEPA Filter)
Peso do item (por filtro)Aproximadamente 0.03 lb (15.4 g)
Product Dimensions (per filter)2.72" L x 0.47" W x 2.72" H (69mm x 12mm x 69mm)
ReutilizaçãoReutilizável (Lavável)
Substituição recomendadaA cada 3 meses
Detailed dimensions of a single Piegricdiat filter.

Imagem: Uma imagem detalhada view of a single Piegricdiat filter with measurements indicating its dimensions: 0.47 inches (12mm) in height and 2.72 inches (69mm) in diameter, with a weight of 0.03lb (15.4g).

Garantia e Suporte

For questions regarding the Piegricdiat replacement filters, please refer to the seller's contact information on the purchase platform. For issues related to your INSE K370/N370 vacuum cleaner, please consult the vacuum cleaner's manufacturer for warranty and support details.

© 2024 Piegricdiat. All rights reserved. This manual is for informational purposes only.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.