pewag 4086065

pewag RSC 850 SERVOSTAR Snow Chain System

Manual de instruções

Introdução

The pewag RSC 850 SERVOSTAR is a premium clip-on snow chain system designed for vehicles with limited clearance. This manual provides essential information for the safe and effective installation, operation, and maintenance of your snow chains.

Os principais recursos incluem:

  • 0 mm clearance required inside the wheel.
  • Easy attachment to the original wheel nut or bolt.
  • All mounting handles are accessible from the outside, eliminating the need to reach behind the wheel.
  • One chain size accommodates various tire dimensions through adaptable components.
  • Innovative chain system provides rim protection by avoiding direct contact with the rim.
  • Starwave® grooved profile on chain links increases surface area by 7% for enhanced traction and extended product life.
  • 3.2 mm chain certified Önorm V 5117 and EN 16662-1.
  • Essential mounting parts are marked in red for easy identification.

Informações de segurança

Always read and understand all instructions before installing or using the snow chains. Failure to follow instructions can result in property damage, injury, or death. Observe all local traffic laws and regulations regarding snow chain use.

  • Do not exceed the maximum speed recommended by the chain manufacturer (typically 50 km/h or 30 mph) or your vehicle manufacturer, whichever is lower.
  • Avoid sudden acceleration, braking, or sharp turns when chains are installed.
  • Remove chains immediately when driving on clear, non-snowy, or non-icy roads to prevent damage to the chains, tires, and road surface.
  • Ensure chains are properly tensioned after installation and re-tensioned after driving a short distance (approx. 100 meters).
  • Check tire pressure before installing chains.
  • Do not use chains on damaged tires.

Configuração e instalação

The pewag RSC 850 SERVOSTAR is designed for quick and easy installation from the outside of the wheel.

Step 1: Prepare the Vehicle and Chains

Park your vehicle on a level surface, engage the parking brake, and turn off the engine. Lay out the snow chain, ensuring it is untangled and free of twists. Identify the red-marked components, which are crucial for mounting.

pewag RSC 850 SERVOSTAR snow chain laid out, front view

Imagem: Frente view of the pewag RSC 850 SERVOSTAR snow chain system installed on a tire, showing the central attachment mechanism and the chain pattern.

Step 2: Attach the Central Mechanism

Position the central attachment mechanism onto the original wheel nut or bolt. The system is designed to securely fasten without requiring access to the inner side of the wheel. Ensure the mechanism is firmly seated.

Close-up of pewag RSC 850 SERVOSTAR central attachment to wheel nut

Imagem: Fechar-se view of the central attachment mechanism of the pewag RSC 850 SERVOSTAR, showing how it connects to the wheel's lug nut or bolt.

Step 3: Connect the Chain Segments

Once the central mechanism is secured, connect the chain segments around the tire. The system's design allows for easy connection of the chain links from the outside. Follow the instructions provided with your specific model for connecting the various points around the tire.

Lado view of pewag RSC 850 SERVOSTAR snow chain on tire

Imagem: Lado view of the pewag RSC 850 SERVOSTAR snow chain installed on a tire, illustrating the chain's coverage and the external attachment system.

Step 4: Tension the Chains

The patented pewag servo ratchet technology automatically tensions the chains. After initial installation, drive a short distance (approximately 100 meters or 300 feet) at a low speed. Stop and check the chains for proper tension and fit. If necessary, make any minor adjustments. The system is designed to maintain optimal tension during use.

Traseira view of pewag RSC 850 SERVOSTAR snow chain on tire

Imagem: Traseira view of the pewag RSC 850 SERVOSTAR snow chain system on a tire, showing the chain links and how they wrap around the tire's circumference.

Instruções de operação

The pewag RSC 850 SERVOSTAR snow chains are recommended for use on paved roads covered with snow or ice.

  • Velocidade de condução: Do not exceed 50 km/h (30 mph) when snow chains are installed.
  • Estilo de condução: Drive smoothly. Avoid sudden acceleration, hard braking, and abrupt steering maneuvers.
  • Condições da estrada: Use chains only on snow-covered or icy roads. Driving on bare pavement will rapidly wear down the chains and can damage your tires and the road.
  • Remoção: Remove chains as soon as you reach clear road conditions.

Manutenção

Proper maintenance extends the life of your pewag RSC 850 SERVOSTAR snow chains.

  • Limpeza: After each use, rinse the chains thoroughly with warm water to remove salt, dirt, and debris.
  • Secagem: Allow the chains to dry completely before storing them to prevent rust.
  • Inspeção: Before and after each use, inspect the chains for any signs of wear, damage, or broken links. Replace damaged chains immediately.
  • Armazenar: Store the chains in their original carrying bag in a dry place, away from direct sunlight and extreme temperatures.
pewag RSC 850 SERVOSTAR carrying bag

Imagem: The blue and red carrying bag for the pewag RSC 850 SERVOSTAR snow chain system, designed for convenient storage and transport.

Solução de problemas

If you encounter issues with your pewag RSC 850 SERVOSTAR snow chains, consider the following:

  • Chains feel loose after driving: Re-check tension after driving a short distance. Ensure the central mechanism is securely attached and all chain segments are properly connected.
  • Ruídos ou vibrações incomuns: Stop immediately and inspect the chains. This could indicate improper installation, a damaged chain, or contact with vehicle components.
  • Difficulty installing: Ensure the chain is untangled. Verify that the central mechanism is correctly aligned with the wheel nut/bolt. Refer to the detailed installation steps.
  • Chains breaking: This can be caused by driving too fast, driving on bare pavement, or improper installation. Inspect for damage and replace if necessary.

Especificações

Recurso Detalhe
Marca pewag
Número do modelo 4086065
Nome do tipo de produto RSC 850 SERVOSTAR
Material Liga de aço
Espessura da corrente 3.2 milímetros
Certificações Önorm V 5117, EN 16662-1
Peso do item 8.96 quilos
Dimensões da embalagem 61 x 26 x 25.5 cm
Tipo de serviço do veículo Carro
Tipo de ajuste automotivo Ajuste específico do veículo
Componentes incluídos Adaptador
País de origem República Checa

Compatible Tire Sizes:

The pewag RSC 850 SERVOSTAR is compatible with a wide range of tire sizes, including but not limited to:

275/30-19, 285/30-19, 235/30-20, 245/30-20, 275/35-18, 285/35-18, 235/35-19, 245/35-19, 275/40-17, 235/40-18, 245/40-18, 245/45-17, 215/45-18, 265/50-15, 275/50-15, 245/50-16, 215/50-17, 225/50-17, 225/55-16, 205/55-17, 245/60-14, 225/60-15, 205/60-16, 185/60-17, 205/65-15, 185/65-16, 215/70-14, 195/70-15, 175/70-16, 195/75-14, 185/75-15, 205/80-13, 185/80-14.

Informações de garantia

For detailed warranty information regarding your pewag RSC 850 SERVOSTAR snow chain system, please refer to the documentation included with your purchase or contact pewag customer support directly. Warranty terms typically cover manufacturing defects under normal use conditions.

Suporte ao cliente

Should you require further assistance, have questions about installation, or need to report an issue, please contact pewag customer support. Contact details can usually be found on the manufacturer's official website ou na embalagem do produto.

For more information, you may visit the official pewag website.

© 2024 pewag. All rights reserved. This manual is for informational purposes only.