Fein Cordless Angle Grinder CCG 18-115-12 AS Instruction Manual

1. Introdução

This manual provides essential information for the safe and effective operation, setup, and maintenance of your Fein Cordless Angle Grinder CCG 18-115-12 AS. This powerful and dust-resistant tool is designed for cutting, grinding, and deburring work on various materials. It features an 18V brushless motor, a 115 mm grinding wheel diameter, and is compatible with AMPShare ProCORE batteries.

2. Instruções de segurança

Observe sempre as seguintes precauções de segurança para evitar ferimentos e danos à ferramenta:

• Use Equipamento de Proteção Individual (EPI): Always use safety glasses, hearing protection, gloves, and a dust mask.
• Fixar a peça de trabalho: Ensure the material being worked on is firmly clampfixado ou preso para evitar movimento durante a operação.
• Mantenha a pegada correta: Hold the angle grinder firmly with both hands, ensuring a stable stance.
• Verifique se há danos: Before each use, inspect the tool, battery, and accessories for any damage. Do not use damaged equipment.
• Utilize os acessórios corretos: Only use grinding and cutting discs that are rated for the tool's speed and diameter (115 mm).
• Ajustar a proteção: Ensure the protective guard is correctly positioned to deflect sparks and debris away from you.
• Evite exageros: Maintain balance and control at all times.
• Mantenha a área de trabalho livre: Remove flammable materials and ensure adequate ventilation.
• Desconecte a energia: Always remove the battery pack before making any adjustments, changing accessories, or performing maintenance.
• Proteção contra reinicialização: The tool features restart protection. If power is interrupted, the tool will not restart automatically when power is restored.
• Electronic Overload Protection: The tool will shut off if overloaded to prevent damage. Reduce pressure and allow the tool to cool.

3. Conteúdo da embalagem

Verifique se todos os itens estão presentes na embalagem:

• 1 x Fein Cordless Angle Grinder CCG 18-115-12 AS
• 1 x Separation Protection Cover
• 1 x Tool-free Quick Release Nut
• 1 x Anti-vibration Handle
• 1 x Key (for disc changes if not using quick release)
• 1 x Plastic Tool Box (L-BOXX 238)

4. Configuração

Before operating the angle grinder, ensure it is properly assembled and configured.

4.1 Instalação da bateria

1. Ensure the battery is fully charged. The Fein Cordless Angle Grinder is compatible with all 18V AMPShare ProCORE batteries.
2. Alinhe a bateria com o compartimento da bateria na ferramenta.
3. Deslize a bateria para dentro do compartimento até que ela se encaixe firmemente no lugar.
4. Para remover, pressione o botão de liberação na bateria e deslize-a para fora.

4.2 Ajuste da proteção

The separation protection cover must always be used. Adjust its position to provide maximum protection for the specific application.

• Loosen the guard's locking mechanism.
• Rotate the guard to the desired position, ensuring it deflects sparks and debris away from the operator.
• Tighten the locking mechanism securely.

4.3 Disc Installation (Grinding/Cutting)

Always ensure the battery is removed before changing discs.

1. Pressione e segure o botão de trava do eixo.
2. If using the tool-free quick release nut: Unscrew the quick release nut by hand. Remove the old disc and the lower flange.
3. Place the new 115 mm grinding or cutting disc onto the spindle, ensuring it sits correctly on the lower flange.
4. Screw the quick release nut back on and tighten it firmly by hand. Release the spindle lock.
5. If using a standard nut and key: Use the provided key to loosen and tighten the nut.

Image: A user demonstrating the installation of a grinding disc onto the angle grinder. The tool-free quick release nut is visible.

4.4 Anti-vibration Handle Attachment

Attach the anti-vibration handle to either side of the gear housing for improved comfort and control during operation.

• Screw the anti-vibration handle into one of the threaded holes on the side of the grinder head.
• Aperte bem com a mão.

5. Instruções de operação

Familiarize yourself with the tool's controls and proper operating techniques.

5.1 Powering On/Off and Speed Preselection

• Ligando: Slide the power switch forward. The tool features a soft start function for smooth power-up.
• Desligando: Slide the power switch backward to the OFF position.
• Electronic Speed Preselection: Use the speed dial to select the desired idle speed between 2,500 and 8,500 min⁻¹. Adjust the speed according to the material and application.

5.2 Técnicas de corte e retificação

Always maintain a firm grip and stable body position. Let the tool do the work; avoid excessive pressure.

Image: A worker grinding a metal bar with the Fein angle grinder, demonstrating proper technique and safety gear.

• Moagem: Apply light, even pressure. Move the grinder smoothly across the surface. The tool's vibration damper helps ensure smooth operation.
• Corte: For cutting, use a cutting disc and ensure the workpiece is securely clamped. Make straight cuts, allowing the disc to cut without forcing it.

Image: A worker cutting a metal pipe with the Fein angle grinder, showing the sparks generated during the process.

Image: A worker performing a cutting operation on a metal bar with the Fein angle grinder, highlighting the tool's performance.

5.3 Recursos avançados

• Blocking Monitoring: The tool is equipped with blocking monitoring, which helps prevent kickback if the disc jams.
• Monitoramento de temperatura: Innovative cooling fin technology and temperature monitoring protect the motor and battery from overheating during intensive use.

6. Manutenção

Regular maintenance ensures the longevity and optimal performance of your angle grinder.

• Limpeza: The robust motor housing is designed to be dust resistant. Regularly clean the tool's ventilation slots and exterior with a soft brush or compressed air to remove dust and debris. Ensure the battery is removed before cleaning.
• Inspeção do disco: Before each use, inspect grinding and cutting discs for cracks, chips, or excessive wear. Replace damaged or worn discs immediately.
• Cuidados com a bateria: Store batteries in a cool, dry place. The Coolpack 2.0 technology helps extend battery life; however, avoid fully discharging batteries and charge them regularly.
• Inspeção Geral: Periodically check all screws and fasteners for tightness. Ensure the guard operates smoothly and locks securely.

7. Solução De Problemas

Consulte esta seção para obter informações sobre problemas comuns e suas soluções.

8. Especificações

Technical data for the Fein Cordless Angle Grinder CCG 18-115-12 AS:

• Modelo: CCG 18-115-12 AS
• Bateria Voltage: 18 V
• Compatibilidade da bateria: Li-ion/ProCORE Li-ion (AMPShare compatible)
• Motor: Sem escova
• Velocidade de marcha lenta: 2,500 - 8,500 min⁻¹ (stepless electronic speed preselection)
• Grinding Wheel Diameter: 115 milímetros
• Elastic Sanding Disc Diameter: 115 milímetros
• Flanges: M 14
• Peso (sem bateria): 2.20 kg
• Dimensões do produto (C x L x A): 35.7 x 25.3 x 44.2 cm
• Material: Metal, aluminium, copper, plastic
• Funções: Soft start, Restart protection, Electronic overload protection, Electronic speed preselection, Blocking monitoring, Vibration damper (4 additional), Temperature monitoring (Coolpack 2.0 technology)

9. Garantia e Suporte

For warranty information, technical support, or service inquiries, please refer to the official Fein website or contact your authorized Fein dealer. Keep your purchase receipt as proof of purchase.

Fein Official Website: www.fein.com