Controle remoto infravermelho de substituição

Generic Replacement IR Remote Control User Manual

For Zebronics 2X15L3 Monster Pro X15 & Ridgewa QS-82105BL, QS-82103BL, QS-3315BR, QS-J1203 Partybox Large Battery PA Speaker Systems

1. Introdução

This manual provides instructions for the Generic Replacement IR Remote Control, designed for specific Zebronics and Ridgewa Partybox PA Speaker Systems. This remote control is a direct replacement for the original remote and is not a universal remote.

Please ensure your original remote control matches the appearance of this replacement remote for full compatibility and functionality. Some functions may differ from the original remote.

2. Compatibilidade

This replacement remote control is compatible with the following speaker systems:

  • Zebronics 2X15L3 Monster Pro X15
  • Ridgewa QS-82105BL
  • Ridgewa QS-82103BL
  • Ridgewa QS-3315BR
  • Ridgewa QS-J1203 Partybox Large Battery PA Speaker System

Important: This is not a universal remote control. It is crucial to verify that your speaker system model is listed above and that your original remote control visually matches this replacement unit.

3. Configuração e Instalação da Bateria

The remote control requires two (2) AAA batteries (not included) for operation. No programming or pairing is required; simply insert the batteries, and the remote is ready for use with compatible devices.

  1. Localize o compartimento da bateria na parte traseira do controle remoto.
  2. Deslize a tampa do compartimento da bateria para baixo ou na direção indicada pela seta para abri-la.
  3. Insira duas (2) pilhas AAA, certificando-se de que os terminais positivo (+) e negativo (-) estejam alinhados corretamente com as marcações dentro do compartimento.
  4. Recoloque a tampa do compartimento da bateria deslizando-a de volta para a posição até ouvir um clique.
Careca view of the black replacement IR remote control, showing all buttons clearly.

Figura 1: Visão de cima para baixo view of the remote control. This image displays the layout of all buttons, including power, number pad, mode, volume, and track controls.

4. Instruções de operação

Point the remote control directly at the infrared (IR) receiver on your speaker system. Ensure there are no obstructions between the remote and the speaker system.

Funções dos botões:

  • PODER: Liga ou desliga o sistema de alto-falantes.
  • Teclado numérico (0-9): Used for direct track selection or inputting numerical values.
  • MODO: Cycles through input modes (e.g., Bluetooth, AUX, USB, FM).
  • USD: Selects USB or SD card input mode.
  • AUXILIAR: Selects Auxiliary input mode.
  • FM: Selects FM radio mode.
  • VOL+ / VOL-: Aumenta ou diminui o nível do volume.
  • EQ / TUN+: Adjusts equalizer settings or tunes up in FM mode.
  • TUN-: Tunes down in FM mode.
  • Previous Track / CH-: Skips to the previous track or changes to the previous FM channel.
  • Reproduzir/Pausar: Reproduz ou pausa a reprodução de áudio.
  • Next Track / CH+: Skips to the next track or changes to the next FM channel.
  • FOLDER SCAN: Scans and navigates through folders on USB/SD media.
Angulado view of the black replacement IR remote control, highlighting the button layout.

Figura 2: Angulado view of the remote control, showing the ergonomic design and button placement for easy access.

5. Manutenção

  • Limpeza: Limpe o controle remoto com um pano macio e seco. Não utilize produtos de limpeza líquidos ou materiais abrasivos.
  • Substituição da bateria: Replace batteries when the remote's range decreases or it stops responding. Always replace both batteries at the same time with new ones of the same type.
  • Armazenar: Se o controle remoto não for usado por um longo período, remova as pilhas para evitar vazamento e danos.
  • Evite danos: Do not drop the remote control or expose it to extreme temperatures, humidity, or direct sunlight.

6. Solução De Problemas

ProblemaPossível causaSolução
O controle remoto não está respondendo.Pilhas descarregadas ou inseridas incorretamente.Substitua as pilhas por pilhas AAA novas, certificando-se da polaridade correta.
Remote has limited range or intermittent response.Weak batteries; Obstruction between remote and speaker; Remote not pointed correctly.Replace batteries; Remove obstructions; Point remote directly at the speaker's IR receiver.
Algumas funções não funcionam.Remote is not fully compatible with all original functions; Speaker model not supported.Refer to the "Compatibility" section. This replacement remote may not support all functions of the original. Ensure your speaker model is listed as compatible.

7. Especificações

  • Tipo de produto: IR Replacement Remote Control
  • Marca: Genérico
  • Fabricante: Easytry
  • Cor: Preto
  • Fonte de energia: 2 x pilhas AAA (não incluídas)
  • Número máximo de dispositivos suportados: 1
  • Compatibilidade: Specific Zebronics and Ridgewa Partybox PA Speaker Systems (refer to Compatibility section)
Outro ângulo view of the black replacement IR remote control, showing the side profile and button depth.

Figure 3: Side-angled view of the remote control, illustrating its slim profile and button ergonomics.

8. Garantia e Suporte

This product is a replacement remote control. Specific warranty information is not provided. For any issues or support, please refer to the seller or the original manufacturer of your speaker system.

Ensure to retain your purchase receipt for any potential support inquiries.

Documentos relacionados - Controle remoto infravermelho de substituição

Préview Guia de compatibilidade da Qubicsystem para os gabinetes de energia QS-BT1, QS-H13, QS-210 e QS-220
Um guia de compatibilidade completo para os gabinetes de energia QS-BT1, QS-H13, QS-210 e QS-220 da Qubicsystem, detalhando os tipos de conexão (A, B, C) e os requisitos de adaptadores para uma integração perfeita e configuração do sistema.
Préview Prolink Master II Series (1P/1P)-Tower UPS Systems | 1-10KVA
Detailed specifications and features of the Prolink Master II Series (1P/1P)-Tower Uninterruptible Power Supply (UPS) systems, covering models from 1KVA to 10KVA. Learn about true online double-conversion technology, DSP control, and rear panel configurations.
Préview Componentes de reposição e acessórios para o sistema de desinfecção UV Sterilight Platinumamp Guia de instalação
Guia completo para substituição de lâmpadas UVampManual de instruções e componentes dos sistemas de desinfecção ultravioleta Sterilight Platinum (modelos SPV-1.5 a SPV-20). Inclui instruções detalhadas de instalação, notas de segurança e uma lista de peças de reposição, como lâmpadas UV.amps, mangas de quartzo, controladores e sensores UV.
Préview Guia de Especificações e Cálculo de PDUs do Sistema Lutron QS
Guia detalhado das Unidades de Distribuição de Energia (PDUs) do sistema Lutron QS, explicando o cálculo da PDU, os valores de consumo/fornecimento de energia dos dispositivos, a fiação e as especificações do sistema para controle de iluminação.
Préview Guia de Instalação da Placa de Aterragem de Fios Lutron QS
Provides comprehensive installation instructions for the Lutron QS Wire Landing Board (QS-WLB), detailing mounting procedures, wiring connections, environmental considerations, safety warnings, and technical support contact information. Includes textual descriptions of diagrams for drilling templates and link device wiring.
Préview Hub de gerenciamento de iluminação Lutron Quantum (QP3) - Especificações técnicas e guia de fiação
Detailed specifications, features, and wiring instructions for the Lutron Quantum Light Management Hub (QP3), a centralized control equipment for Quantum Select lighting systems. This document covers installation, connectivity, and technical performance.