1. Produto acabadoview
Principais características
- 6000A Jump Starter: Capable of reliably jump-starting 12V vehicles (all gasoline engines and up to 12.0L diesel engines) in seconds, even in temperatures ranging from -20°C to 60°C. Provides up to 70 jump starts on a single charge. Suitable for automobiles, trucks, motorcycles, boats, lawnmowers, yachts, pickups, and snowmobiles.
- 150PSI Portable Air Compressor: Designed for rapid inflation of all tires from 0 PSI to 150 PSI. Features dual-cylinder technology for a fast inflation rate of 50 LPM (1.76 CFM).
- Digital Pressure Gauge & Automatic Shut-off: Equipped with a real-time LED digital pressure gauge for accurate readings. Allows selection of preset modes (car, bicycle, motorcycle, ball) and automatically stops inflation once the desired PSI is reached.
- Bateria externa de 21800mAh: Functions as a power bank with Type-C input (5V/3A, 9V/2A) and dual USB outputs (5V/3A) to charge personal devices like cell phones and tablets. Recommended charging the jump starter with a 5V/2A adapter or higher.
- Design prático: Features a unique 3.4-inch large LCD screen displaying operational status, battery level, and potential errors. Includes a 600 lumens LED light with 3 modes (constant light, strobe, SOS) for outdoor activities or emergencies. An additional small light is integrated for illuminating the inflation operation area.
- Cabos de ligação inteligentes: Provides 8 types of protection, including protection against overheating, overcharge, over-discharge, over-voltage, short-circuit, reverse polarity, and anti-interference.
Conteúdo da embalagem
- 1 x ACEZUK M06 Jump Starter with Air Compressor
- 1 x Smart Jump Cable
- 1 x Mangueira da Bomba de Ar
- 4 x Gas Nozzles
- Cabo de carregamento USB-C 1 x
- 1 x Manual do Usuário
- 1 x Estojo de transporte portátil em EVA

2. Informações de segurança
Leia e compreenda todas as instruções de segurança antes de usar este produto. O não cumprimento destas instruções pode resultar em choque elétrico, incêndio e/ou ferimentos graves.
- Do not operate the air pump continuously for extended periods. If the tire compressor becomes hot, allow it to cool down for several minutes before resuming inflation.
- Avoid over-inflating tires, as this can cause damage. If a tire is over-inflated, gently press the tire valve to release excess air.
- Always ensure correct polarity when connecting the jump cables to the vehicle battery terminals. Incorrect connection can cause sparks, damage the device, or harm the user.
- Mantenha o dispositivo e seus acessórios fora do alcance de crianças.
- Do not attempt to disassemble, modify, or repair the device. This will void the warranty and may lead to hazards.
- Store the device in a cool, dry place, away from direct sunlight, moisture, and flammable materials.
- Use only the provided smart jump cables and accessories with this device.
3. Configuração
Carregando o dispositivo
Before initial use, fully charge the ACEZUK M06. It is recommended to charge the device every 3-4 months to maintain optimal battery health, especially if not in regular use.
- Connect the provided USB-C charging cable to the device's Type-C input port.
- Connect the other end of the USB-C cable to a 5V/2A or higher USB power adapter (not included).
- The LCD screen will display the charging status and battery level. Charge until the battery indicator shows 100%.
Inspeção Inicial
Upon receiving your ACEZUK M06, perform a quick inspection:
- Check the device and all accessories for any visible damage.
- Ensure all components listed in the 'Package Contents' section are present.
4. Instruções de operação
4.1 Partida de um Veículo
Siga estes passos para dar partida no seu veículo com segurança:
- Certifique-se de que a ignição do veículo esteja desligada e o freio de estacionamento acionado.
- Insert the smart jump cable plug completely into the jump starter's designated port. The red and green lights on the clamp will flash alternately, indicating it's ready.
- Conecte o cl vermelhoamp ao terminal positivo (+) da bateria do veículo.
- Conecte o cl pretoamp ao terminal negativo (-) da bateria do veículo.
- If the indicator light on the smart cable flashes red and green alternately, and the vehicle does not start, press and hold the forced start button on the smart cable for 3 seconds until the light turns solid green. This bypasses safety checks for severely discharged batteries.
- Start the vehicle's engine within 30 seconds of the indicator light turning solid green.
- Assim que o veículo ligar, remova imediatamente o clamps from the battery terminals within 30 seconds. First, remove the black clamp, então o cl vermelhoamp.


Video 1: Demonstration of how to force start a car using a jump starter.
Video 2: Step-by-step guide on how to jump start a car.
4.2 Utilizando o compressor de ar
To inflate tires or other inflatables:
- Pressione o botão ON/OFF para ligar o dispositivo.
- Briefly press the air pump button (usually indicated by a tire icon) to enter inflation mode. The screen will display the current pressure.
- Press the 'M' (Mode) button to cycle through and select the appropriate inflation mode (e.g., car, bicycle, motorcycle, ball).
- Use the '+' and '-' buttons to adjust the desired target air pressure. You can also change the unit of measurement (PSI, BAR, KPA) if available.
- Connect the air pump hose securely to the tire valve or the appropriate gas nozzle for other inflatables.
- Press and hold the air pump button for 3 seconds to begin inflation.
- O compressor irá parar automaticamente assim que a pressão predefinida for atingida.
- Briefly press the air pump button again to exit inflation mode.


Video 3: Instructions on how to inflate a tire using the device.
4.3 Utilizando como um Power Bank
The ACEZUK M06 can charge your electronic devices:
- Connect your mobile phone, tablet, or other USB-powered device to one of the dual USB output ports (5V/3A) on the jump starter.
- The device will automatically begin charging your connected device.

4.4 Usando a luz LED
A luz LED integrada fornece iluminação para diversas situações:
- Press the light button (usually indicated by a light bulb icon) to turn on the LED light.
- Press the button repeatedly to cycle through the 3 modes: constant light, strobe, and SOS signal.
- An additional small light is located on the bottom of the product to specifically illuminate the area around the tire valve during inflation.

5. Manutenção
Proper maintenance ensures the longevity and optimal performance of your ACEZUK M06:
- Armazenar: Store the device in its portable EVA carrying case in a cool, dry place, away from direct sunlight, moisture, and extreme temperatures.
- Recarregando: If the device is not used regularly, recharge it every 3-4 months to prevent deep discharge and maintain battery health.
- Limpeza: Clean the exterior of the device with a soft, dry cloth. Do not use harsh chemicals, solvents, or abrasive cleaners. Ensure all ports are free from dust and debris.
- Cuidados com os cabos: Inspect the smart jump cables and air pump hose regularly for any signs of wear or damage. Replace if necessary.
6. Solução De Problemas
If you encounter issues with your ACEZUK M06, refer to the table below for common problems and their solutions:
| Problema | Possível causa | Solução |
|---|---|---|
| Dispositivo não liga. | Bateria fraca ou sem carga. | Charge the device fully using the provided USB-C cable and a suitable adapter. |
| Vehicle not starting. | Incorrect cable connection, severely discharged battery, or vehicle issue. | Garantir clamps are connected correctly (red to +, black to -). Check if the smart cable indicator light is solid green. If not, use the forced start function. If the issue persists, the vehicle battery might be beyond jump-starting or there's another vehicle problem. |
| O compressor de ar não está inflando. | Hose not securely connected, incorrect pressure setting, or low device battery. | Verify the air pump hose is tightly connected to the tire valve. Ensure a target pressure is set. Check the device's battery level and recharge if necessary. |
| Air compressor overheats. | Continuous operation without cooling. | Stop the inflation process and allow the compressor to cool down for several minutes before resuming. Avoid prolonged continuous use. |
| Leitura de pressão imprecisa. | Incorrect unit of measurement selected. | Press the 'U' (Unit) button to cycle through and select the correct pressure unit (PSI, BAR, KPA). |
7. Especificações
- Marca: ÁCEZUK
- Modelo: M06
- Peak atual: 6000 Amperes
- Capacidade da bateria: 21800 mAh (íon de lítio)
- Tipo de serviço do veículo: Automotive (All Gas, up to 12.0L Diesel)
- Volumetage: 12 Volts
- Pressão do compressor de ar: 0 150-PSI
- Taxa de fluxo de ar: 50 LPM (1.76 CFM)
- Entrada Tipo C: 5 V/3 A, 9 V/2 A
- Saídas USB: Duplo 5V/3A
- Luz LED: 600 Lumens (3 modes: Light/Strobe/SOS)
- Temperatura de operação: -20°C a 60°C
- Peso do produto: 1.57 kg
- Dimensões da embalagem: 21.1 x 17.3 x 14.4 cm
8. Garantia e Suporte
ACEZUK is committed to providing high-quality products and excellent customer service.
- Garantia: This product comes with a 2-year FREE warranty from the date of purchase.
- Suporte técnico: Lifetime technical support is available for all ACEZUK M06 users.
- Atendimento ao Cliente: Our customer service team is available 24/7 to assist you with any questions or concerns.
For warranty claims, technical assistance, or general inquiries, please refer to the contact information provided with your purchase or visit the official ACEZUK website para recursos de suporte.