Manual de instruções

1. Introdução

This manual provides essential information for the proper setup, operation, and maintenance of your new Generic Replacement Remote Control. This remote is designed to function with specific JVC Micro Compact Component Stereo Systems, including models CA-UXQ30, SP-UXQ10, and SP-UXQ10S.

Leia atentamente este manual antes de usar o controle remoto para garantir o melhor desempenho e maior durabilidade.

2. Produto acabadoview

The Generic Replacement Remote Control is a dedicated infrared (IR) remote designed to replace original remote controls for compatible JVC stereo systems. It features a compact design and is made from durable ABS material.

Principais características:

• Substituição direta: Functions as a replacement for original remote controls for specified JVC models.
• Nenhuma programação necessária: Ready to use after battery installation.
• Construção durável: Made of ABS material for comfortable handling and durability.
• Desempenho estável: Offers reliable operation with a long transmission distance.

Figura 2.1: Visão de cima para baixo view do controle remoto.

Figura 2.2: Angulado view of the remote control, showing button details.

3. Configuração

3.1 Instalação da bateria

The remote control requires batteries for operation. Batteries are não incluso with the remote control and must be purchased separately.

1. Localize o compartimento da bateria na parte traseira do controle remoto.
2. Abra a tampa do compartimento da bateria.
3. Insert new batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
4. Feche bem a tampa do compartimento da bateria.

Informações importantes sobre a bateria:

• Não misture pilhas novas com velhas.
• Do not mix different types of batteries (e.g., alkaline and rechargeable).
• Remova as pilhas se o controle remoto não for usado por um longo período para evitar vazamentos.

3.2 Configuração inicial

This replacement remote control requires no programming or setup. Once batteries are correctly installed, it is ready for use with compatible JVC stereo systems.

4. Instruções de operação

To operate your JVC stereo system using this remote control, point the remote directly at the infrared sensor on your stereo system. Ensure there are no obstructions between the remote and the stereo system.

4.1 Funções Básicas

The remote control provides access to various functions of your JVC stereo system. Common functions include:

• Ligar/desligar: Use the STANDBY O/I button to turn the system on or off.
• Controle de volume: Use the VOLUME + and - buttons to adjust the sound level.
• Seleção de fonte: Buttons like CD, TUNER, TAPE, AUX, etc., allow you to switch between different audio sources.
• Controles de reprodução: Buttons such as Play, Pause, Stop, Fast Forward, Rewind, and Skip are available for media playback.
• Teclado numérico: For direct track selection or radio station tuning.

Note: As a replacement remote, some advanced or specific functions of your original remote may not be supported or may operate differently. This is not indicative of a defect.

4.2 Desempenho Ótimo

• Maintain a clear line of sight between the remote control and the stereo system's IR receiver.
• Ensure the remote control is within the effective operating range (typically up to 20 feet or 6 meters).

5. Manutenção

5.1 Limpando o controle remoto

Para limpar o controle remoto, use um pano macio e seco. Para sujeira mais difícil de remover, umedeça levemente o controle.ampen the cloth with water or a mild, non-abrasive cleaner. Do not use harsh chemicals, solvents, or abrasive cleaning pads, as these can damage the remote's surface or internal components.

5.2 Substituição da bateria

Replace batteries when the remote control's response becomes sluggish or stops working. Refer to Section 3.1 for battery installation instructions. Always replace all batteries at the same time with new ones of the same type.

6. Solução De Problemas

6.1 O controle remoto não responde

• Verifique as baterias: Ensure batteries are inserted correctly with the correct polarity (+/-) and are not depleted. Replace with fresh batteries if necessary.
• Linha de visão: Verify there are no obstructions between the remote control and the stereo system's IR receiver.
• Distância: Certifique-se de estar dentro do alcance efetivo do controle remoto.
• Sensor IR: Confirm the IR sensor on your stereo system is clean and not blocked.

6.2 Some Functions Do Not Work

This remote is a replacement unit. It is designed to replicate the primary functions of the original remote. However, due to variations in original remote designs and specific model features, some advanced or less common functions may not be supported. This is normal for replacement remotes and does not indicate a defect in the product.

7. Especificações

Note: The color of the remote control may be sent randomly as per manufacturer's discretion.

8. Garantia e Suporte

Specific warranty information for this Generic Replacement Remote Control is not provided in the product details. For any warranty-related inquiries or technical support, please contact the seller or retailer from whom you purchased the product directly.

It is recommended to retain your purchase receipt as proof of purchase.