1. Introdução
Thank you for choosing the FLITI AMS193 Motion Sensor Solar Security Lights. This product is designed to provide efficient and reliable outdoor lighting using solar power, featuring adjustable heads, a sensitive motion sensor, and a durable waterproof design. Please read this manual carefully before installation and use to ensure optimal performance and safety.
2. Informações de segurança
- Ensure the product is installed in a location that receives direct sunlight for at least 6-8 hours daily to ensure proper charging.
- Não desmonte nem modifique o produto. Modificações não autorizadas podem causar danos e anular a garantia.
- Mantenha o produto longe do fogo ou de altas temperaturas.
- Avoid direct eye exposure to the bright LED light.
- Descarte as baterias e os componentes eletrônicos de acordo com as normas locais.
- This product is IP65 waterproof, suitable for outdoor use in various weather conditions, but avoid submerging it in water.
3. Conteúdo da embalagem
Por favor, verifique a embalagem para garantir que todos os itens estejam presentes:
- FLITI AMS193 Solar Security Light Unit (x2)
- Suporte de montagem (x2)
- Screws and Wall Plugs (x4 sets)
- Manual do usuário (x1)
4. Recursos do Produto
- Iluminação super brilhante: Equipped with 229 high-quality LED beads, providing up to 2500 lumens of 6500K bright white light.
- Wider Lighting Area: Features 3 independently adjustable lamp heads and a rotatable solar panel, allowing for omnidirectional and multi-angle lighting coverage up to 120 degrees.
- Ultra-Sensitive Motion Sensor: An upgraded infrared digital motion sensor detects movement up to 12 meters (39 feet) within a 120-degree angle, activating the light quickly at night.
- IP65 à prova d'água: Durable construction ensures reliable operation in various outdoor weather conditions, including rain and snow.
- Solar Powered & Wireless: Environmentally friendly and easy to install without the need for electrical wiring.
Image: Key features of the FLITI AMS193 solar light, including sensing distance, operating modes, and waterproof rating.
Image: High-quality LED beads and brightness comparison.
Image: IP65 Waterproof feature in action during rain.
5. Configuração e instalação
The FLITI AMS193 solar security light is designed for quick and simple wireless installation.
5.1 Escolha de um local de instalação
- Select a location that receives direct sunlight for at least 6-8 hours per day to ensure the solar panel can fully charge the battery.
- Avoid areas under eaves, trees, or other obstructions that might block sunlight or motion sensor detection.
- Mount the light at a height of approximately 2-3 meters (6.5-10 feet) for optimal motion detection and light coverage.
5.2 Etapas de montagem
- Mark the desired installation position on the wall.
- Faça dois furos nas posições marcadas.
- Insira as buchas nos orifícios perfurados.
- Fixe o suporte de montagem na parede utilizando os parafusos fornecidos.
- Slide the solar light unit onto the mounting bracket until it clicks securely into place.
Image: Installation steps for mounting the solar light.
5.3 Adjusting Light Heads and Solar Panel
The solar panel and the three lamp heads can be rotated independently to customize lighting direction and solar charging angle.
- Adjust the solar panel to face direct sunlight for maximum charging efficiency.
- Angle the three lamp heads to cover your desired lighting areas, such as pathways, doorways, or garden sections.
Image: Flexible rotation design of the solar panel and light heads.
6. Instruções de operação
The FLITI AMS193 features three distinct operating modes, selectable via a button on the back of the unit.
6.1 Carregamento Inicial
Before first use, allow the solar light to charge in direct sunlight for at least 8-10 hours to ensure the battery is fully charged.
Image: Solar light charging during the day and activating at night.
Seleção de 6.2 modos
Press the power button on the back of the unit to cycle through the following modes:
- Mode 1 (Motion Sensor Mode): The light remains off until motion is detected. When motion is sensed, the light turns on at full 2500LM brightness for approximately 20 seconds, then turns off after motion ceases.
- Mode 2 (Dim to Sensor Mode): The light automatically turns on at dusk at a low brightness (approx. 200LM). When motion is detected, it switches to full 2500LM brightness for approximately 20 seconds, then returns to dim brightness after motion ceases. After 6 hours of operation, it automatically switches to Mode 1.
- Modo 3 (Modo Sempre Ligado): The light automatically turns on at dusk at a medium brightness (approx. 500LM) and stays on continuously. After 4 hours of operation, it automatically switches to Mode 1.
Image: Visual representation of the three operating modes.
7. Manutenção
Regular maintenance ensures the longevity and optimal performance of your solar lights.
- Painel solar limpo: Limpe periodicamente o painel solar com um pano macio e seco.amp Use um pano para remover poeira, sujeira ou detritos. Um painel limpo garante a máxima absorção da luz solar e eficiência de carregamento.
- Substituição da bateria: The unit uses rechargeable batteries. If the light's performance significantly decreases over time, the batteries may need replacement. Access the battery compartment by removing the plate cover. Ensure to replace with compatible rechargeable batteries.
- Inspecione quanto a danos: Regularly check the light for any physical damage, loose connections, or signs of wear.
8. Solução De Problemas
If you encounter issues with your FLITI AMS193 solar lights, refer to the following common problems and solutions:
| Problema | Possível causa | Solução |
|---|---|---|
| A luz não acende à noite. | Luz solar insuficiente para carregar. Switch is off or in incorrect mode. Bateria descarregada ou com defeito. | Certifique-se de que o painel solar receba de 6 a 8 horas de luz solar direta por dia. Check the operating mode and ensure it's set correctly (Mode 1, 2, or 3). Allow several days of charging. If issue persists, consider replacing the rechargeable battery. |
| A luz é fraca ou permanece acesa apenas por um curto período de tempo. | Carga insuficiente. Painel solar sujo. Bateria envelhecida. | Relocate the light to an area with more direct sunlight. Limpe o painel solar regularmente. Replace the rechargeable battery if it's old. |
| Motion sensor is not working or too sensitive. | Sensor obstruído. Altura/ângulo de montagem incorretos. Environmental factors (e.g., strong winds, heat sources). | Certifique-se de que a lente do sensor esteja limpa e desobstruída. Adjust the mounting height and angle for optimal detection. Consider relocating if false triggers are frequent due to environmental factors. |
Se essas soluções não resolverem o problema, entre em contato com o suporte ao cliente.
9. Especificações
| Recurso | Especificação |
|---|---|
| Número do modelo | AMS193 |
| Marca | FLITI |
| Fonte de luz | 229 contas de LED |
| Brilho | Até 2500 Lumens |
| Temperatura de cor | 6500 Kelvin (branco frio) |
| Alcance do Sensor de Movimento | Até 12 metros (39 pés) |
| Ângulo do sensor de movimento | 120 graus |
| Resistência à água | IP65 à prova d'água |
| Fonte de energia | Alimentado por energia solar |
| Material | Plástico |
| Tipo de montagem | Montagem na parede |
| Number of Light Heads | 3 (ajustável) |
10. Garantia e Suporte
Garantia do fabricante: This product comes with a 2-year manufacturer warranty from the date of purchase, covering defects in materials and workmanship under normal use.
O que está coberto: Defeitos de materiais e de fabricação.
O que não está coberto: Damage caused by improper installation, misuse, abuse, accidents, unauthorized repairs or modifications, or normal wear and tear.
Suporte ao cliente: For warranty claims, technical assistance, or any questions regarding your FLITI AMS193 solar lights, please contact your retailer or the manufacturer's customer service through the contact information provided at the point of purchase.