AMPBANK H128 Handheld Thermal Camera User Manual

1. Introdução

This manual provides comprehensive instructions for the safe and effective use of the AMPBANK H128 Handheld Thermal Camera. The H128 is designed for precise temperature measurement and thermal imaging, suitable for various applications including electrical inspections, HVAC diagnostics, building energy audits, and automotive maintenance. Please read this manual thoroughly before operating the device and retain it for future reference.

Figura 1.1: A AMPBANK H128 Handheld Thermal Camera, showcasing its ergonomic design and integrated display.

2. Informações de segurança

Observe sempre as seguintes precauções de segurança para evitar ferimentos e danos ao dispositivo.

• Do not point the camera directly at extremely high-intensity energy sources, such as the sun or lasers, as this may damage the infrared detector.
• Avoid dropping the device or subjecting it to severe impact, despite its robust design.
• Do not immerse the device in water or other liquids. While it has an IP65 rating for dust and water jet protection, it is not designed for submersion.
• Use only the specified charging cable (USB-C) and power adapter to charge the device.
• Não tente desmontar ou modificar a câmera. Os reparos devem ser realizados somente por pessoal de serviço autorizado.
• Keep the lens clean and free from dust and debris. Use a soft, lint-free cloth for cleaning.
• Operate the device within the specified environmental conditions (temperature and humidity).

3. Produto acabadoview

3.1. Componentes

O AMPBANK H128 thermal camera includes the following main components:

• Lente infravermelha: Captures thermal radiation.
• Tela de exibição: Shows thermal images, temperature readings, and menu options.
• Botões de controle: For navigation and selection (OK, Up, Down, Return/Power).
• Botão de gatilho: To capture images.
• Porta USB-C: Para carregamento e transferência de dados.
• Montagem em tripé: Standard 1/4-inch thread for stable positioning.

3.2. Principais características

The H128 thermal camera offers a range of advanced features for efficient and accurate thermal inspections:

• Enhanced Clarity with TISR Resolution: The camera utilizes TISR (Thermal Image Super Resolution) technology to achieve an effective display resolution of 240x240 pixels from a 128x128 infrared sensor, providing clearer thermal images.

Figure 3.1: Comparison of thermal image clarity with and without TISR technology, demonstrating the enhanced 240x240 resolution.
• Vida útil prolongada da bateria em 24 horas: Equipped with a built-in 2900mAh rechargeable battery, the H128 provides up to 24 hours of continuous operation, minimizing downtime during extended inspections.


Figure 3.2: Illustration of the H128's long-lasting 24-hour battery life and Type-C charging port.

• Medição precisa de temperatura: The device offers high accuracy with a temperature resolution of 0.1°C and readings within ±3%, covering a wide temperature range from -4°F to 842°F (-20°C to 450°C). Users can adjust emissivity for various materials to improve accuracy.


Figure 3.3: The H128 in use, demonstrating its capability for accurate temperature measurement in an electrical panel.

• Temperature Alarm for Anomaly Detection: A built-in alarm system quickly identifies abnormal heat sources, automatically tracking and displaying maximum, minimum, and center temperatures on the screen.

Figure 3.4: The H128 display highlighting hot, center, and cold spots with an integrated high/low temperature alarm.
• Design durável e robusto: The H128 is built to withstand demanding environments, featuring a 6.56-foot (2-meter) drop protection and an IP65 ingress protection rating against dust and water jets.
• Alta taxa de quadros: A 25Hz frame rate ensures smooth, real-time thermal imagery, crucial for dynamic inspections.


Figure 3.5: Visual comparison of thermal image fluidity at 25Hz versus 9Hz frame rates.

• Multiple Thermal Palettes: Choose from 5 different color palettes (Iron Red, Black Hot, Rainbow, White Hot, Red Hot) to best visualize temperature differences for specific applications.


Figure 3.6: Display of the five available thermal color palettes for varied visualization of heat signatures.

4. Configuração

4.1. Desembalagem

Retire cuidadosamente todos os itens da embalagem. A caixa deve conter:

• AMPBANK H128 Thermal Imaging Camera
• Cabo USB-C

Inspect the camera for any signs of damage. If any components are missing or damaged, contact customer support immediately.

4.2. Carregando a bateria

Before first use, fully charge the camera's built-in battery.

1. Connect the supplied USB-C cable to the USB-C port on the top of the camera.
2. Conecte a outra extremidade do cabo USB-C a um adaptador de energia USB compatível (não incluído) ou a uma porta USB do computador.
3. The charging indicator on the screen will show the charging status. A full charge typically takes several hours.
4. Depois de totalmente carregado, desconecte o cabo.

4.3. Inicialização e configurações básicas

1. Ligar: Press and hold the power button (often integrated with the Return button) for approximately 8 seconds until the screen illuminates.
2. Seleção de idioma: Upon first power-on, you may be prompted to select your preferred language. Use the Up/Down buttons to navigate and the OK button to confirm.
3. Data e hora: Defina a data e a hora corretas para obter horários precisosamping of captured images. Navigate to the settings menu using the OK button, then find the Date/Time option.

5. Operação

5.1. Operação básica

• Ligar/desligar: Press and hold the power button for 8 seconds to turn on. Press and release the power button to turn off or enter sleep mode.
• Menus de navegação: Use o OK button to enter the menu. Use the Up e Abaixo arrow buttons to scroll through options. Press OK to select an option. Press the Retornar button to exit a menu or go back.
• Capturando imagens: Aim the camera at the target. Press the trigger button (located on the handle) to capture a thermal image. Images are saved internally.

5.2. Measurement Modes and Settings

• Temperature Spot Measurement: The H128 automatically displays the maximum, minimum, and center temperatures on the screen.
• Ajuste de emissividade: For accurate temperature readings, adjust the emissivity setting based on the material being inspected. Access this setting through the menu. Common emissivity values can be found in reference tables.
• Configuração de distância: Inputting the approximate distance to the target can further refine temperature accuracy.
• Paletas térmicas: Change the color scheme of the thermal image to highlight temperature differences more effectively. Navigate to the palette settings in the menu and choose from Iron Red, Black Hot, Rainbow, White Hot, or Red Hot.

5.3. Gestão de Dados

The H128 can store over 8000 images internally. To transfer images to a computer:

1. Connect the camera to your computer using the supplied USB-C cable.
2. The camera will appear as a removable storage device.
3. Browse to the image folder and copy the desired files para o seu computador.

Figure 5.1: Connecting the H128 thermal camera to a laptop via USB-C for image transfer.

6. Manutenção

6.1. Limpeza

• Corpo da câmera: Limpe o corpo da câmera com um pano macio e seco.amp pano. Não use produtos de limpeza abrasivos ou solventes.
• Lente infravermelha: The infrared lens is a delicate optical component. Use a lens cleaning cloth or a soft, lint-free cloth specifically designed for optics. Gently wipe the lens to remove dust or smudges. Do not apply excessive pressure or use harsh chemicals.

6.2. Armazenamento

When not in use, store the H128 in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the battery is partially charged (around 50%) before long-term storage to preserve battery health.

6.3. Cuidados com a bateria

Para maximizar a vida útil da bateria:

• Evite descarregar completamente a bateria com frequência.
• Evite deixar a bateria totalmente carregada por longos períodos.
• Carregue a bateria em temperatura ambiente.

7. Solução De Problemas

Se o problema persistir após tentar essas soluções, entre em contato com AMPBANK customer support.

8. Especificações

9. Garantia e suporte

For detailed warranty information, please refer to the warranty card included with your product or visit the official AMPBANCO webOs termos e condições da garantia podem variar conforme a região e o produto.

If you require technical assistance, have questions about your product, or need to initiate a warranty claim, please contact AMPBANK customer support through their official channels:

• Fabricante: AMPBANCO
• Loja online: Visite o AMPBANK Store on Amazon
• Consulte o oficial AMPBANCO website or product packaging for the most current contact information (email, phone, service centers).