Manual do Usuário da Mira Red Dot Osight K Micro

1. Introdução

The Osight K Micro Red Dot Sight is a compact, open reflex optic designed for quick target acquisition and enhanced visibility. Featuring a 6 MOA dot and RMSc/K footprint compatibility, it is suitable for various subcompact firearm setups. This manual provides instructions for proper installation, operation, and maintenance of your Osight K Red Dot Sight.

Image 1.1: Osight K Micro Red Dot Sight on a pistol.

2. Conteúdo da embalagem

Verify that all items are present in your Osight K package:

• Osight K Red Dot Sight x 1
• Adjustment Tool x 1
• Battery Compartment Screw x 2 (spare)
• Pano de limpeza x 1
• Manual do usuário x 1
• Safety Warnings x 1
• READ ME Card x 1
• Osight Stickers x 1
• Mounting Screws (various sizes and lengths for RMSc mounts)

Image 2.1: Included components of the Osight K package.

3. Características

• Ponto de 6 MOA: A 6-MOA dot provides quick target acquisition and enhanced visibility, particularly useful in dynamic situations. This larger dot size aids in consistent presentation and target alignment.

Image 3.1: The 6 MOA dot reticle for rapid target acquisition.
• Side-Loading Battery: The battery compartment is designed for effortless battery replacement without requiring the removal of the optic from its mount, preserving zero.
• RMSc Footprint: The Osight K is designed to fit directly onto RMSc cut slides, ensuring broad compatibility and seamless integration with many popular firearm platforms.
• Motion Activation Technology: A built-in motion sensor activates the optic upon the slightest movement. After 3 minutes of inactivity, the optic automatically powers down to conserve battery life.
• Indicação de baixa potência: Se o volume da bateriatage drops below 2.2V, the reticle will quickly triple-flash once per minute, signaling that an imminent battery replacement is recommended.
• Optical Quality: Engineered with premium optical glass and advanced multilayer coatings, the Osight K delivers maximum light transmission, reduced glare, and enhanced durability, while also improving power efficiency.
• Configurações de brilho: Offers 8 daylight and 2 night vision brightness settings for versatility in various lighting conditions.

4. Configuração

4.1 Instalação da bateria

1. Locate the side-loading battery compartment on the right side of the optic.
2. Using the included adjustment tool or a small flathead screwdriver, carefully unscrew the battery compartment cover.
3. If a battery is pre-installed, remove the plastic insulator film to activate it. If installing a new battery (CR1632, not explicitly stated but common for this type of optic), ensure the positive (+) side faces outwards.
4. Replace the battery compartment cover and tighten it securely to ensure a waterproof seal. Do not overtighten.

Image 4.1: Side-loading battery compartment for easy access.

4.2 Mounting the Optic

The Osight K is designed for direct mounting to RMSc/K footprint slides. Refer to the compatibility table in Section 7 for specific firearm models and recommended screws.

1. Certifique-se de que a arma de fogo esteja descarregada e em local seguro antes de prosseguir.
2. Align the Osight K with the RMSc/K cut on your slide.
3. Select the appropriate mounting screws from the included hardware kit. The screws are pre-threaded with thread locker.
4. Insert and hand-tighten the screws. Then, use a torque wrench (not included) to tighten the screws to the manufacturer's recommended specifications for your slide. Overtightening can damage the optic or slide.

Image 4.2: Mounting the Osight K using the RMSc footprint.

4.3 Zeroing the Optic

Zeroing is the process of aligning the red dot with the point of impact of your firearm. This should be done at a safe shooting range.

1. Mount the optic securely to your firearm.
2. Using the included adjustment tool, locate the windage (left/right) and elevation (up/down) adjustment screws, typically found on the side and top of the optic.
3. Fire a group of shots at a target from a known distance (e.g., 10-25 yards).
4. Observe o ponto de impacto em relação ao seu ponto de mira.
5. Adjust the windage and elevation screws as needed. Typically, turning the screw in the direction you want the point of impact to move will adjust the dot accordingly. Consult the 'READ ME' card for specific adjustment increments.
6. Repeat firing and adjusting until the point of impact matches your aim point.

5. Operação

5.1 Power On/Off and Motion Activation

The Osight K features motion activation. When the optic detects movement, it will automatically power on. If no motion is detected for approximately 3 minutes, the optic will enter a sleep mode to conserve battery. Any subsequent movement will instantly reactivate the dot.

Image 5.1: Motion Activation Technology for automatic power management.

5.2 Ajuste de brilho

The Osight K offers 10 brightness settings: 8 for daylight conditions and 2 for night vision compatibility.

• To increase brightness, press the '+' button located on the side of the optic.
• To decrease brightness, press the '-' button located on the side of the optic.

Image 5.2: Brightness adjustment buttons and available settings.

5.3 Indicação de Bateria Fraca

Quando a bateria voltage drops below 2.2V, the red dot reticle will flash three times rapidly, once per minute. This serves as a warning to replace the battery soon.

Image 5.3: Visual representation of the low power indication.

6. Manutenção

6.1 Limpeza

To maintain optimal performance and clarity, regularly clean the lenses and exterior of your Osight K Red Dot Sight.

• Use the provided cleaning cloth or a soft, lint-free cloth to gently wipe the lenses. Avoid using harsh chemicals or abrasive materials.
• Para manchas persistentes, aplique uma pequena quantidade de solução de limpeza de lentes própria para óptica no pano, e não diretamente na lente.
• Limpe a caixa externa com um adamp pano.

6.2 Substituição da bateria

Replace the battery when the low power indication appears. Refer to Section 4.1 for detailed battery installation instructions.

7. Solução De Problemas

8. Especificações

9. Compatibilidade

The Osight K is designed for direct mounting to slides with an RMSc/K footprint. The following table lists compatible brands and models, along with recommended screw types.

Image 7.1: Osight K Compatibility Table (Part 1).

Image 7.2: Osight K Compatibility Table (Part 2).

Image 7.3: Osight K Compatibility Table (Part 3).

9.1 RMR-Cut Slide Adapter

For firearms with an RMR-cut slide, a steel adapter plate (sold separately) can be used to enable compatibility with RMSc optics like the Osight K. This expands mounting options without requiring a new slide.

Image 7.4: RMR-cut slide adapter plate for RMSc optics.

10. Garantia e Suporte

10.1 Informações de garantia

The Osight K Micro Red Dot Sight comes with a Garantia vitalícia. Please refer to the official Osight website or contact customer service for full details regarding warranty coverage and claims.

10.2 Suporte ao cliente

For any questions, technical assistance, or warranty claims, please contact Osight customer support through their official channels. Keep your purchase receipt and product model information handy when contacting support.