DURATECH 20V 18GA Cordless Brad Nailer and Staple Gun Instruction Manual

1. Informações de segurança

WARNING: Always read and understand all safety warnings and instructions before operating this tool. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

• Use sempre óculos de segurança ou óculos de proteção com proteções laterais e, se necessário, uma proteção facial completa ao operar este produto.
• To avoid accidental firing, keep fingers AWAY from triggers when not driving fasteners.
• Do not alter or remove triggers.
• NEVER point the tool at yourself or others in the work area when connecting the battery and when using or handling the tool. Failure to follow warnings could result in DEATH or SERIOUS INJURY.
• To avoid battery over-discharge and potential damage, recharge the device at least once every three months.

2. Produto acabadoview

Conteúdo da embalagem

• Brad Nailer sem fio
• 1000pcs 1-1/4" Staples
• 1000pcs 1-9/16" Nails
• Bateria de íon de lítio de 2.0 Ah
• Carregador rápido de 1 hora
• Estojo de transporte
• Manual de instruções

Componentes da ferramenta

Figure 1: Labeled components of the DURATECH 20V 18GA Cordless Brad Nailer.

Dimensões e Peso

Figure 2: Physical dimensions and weight of the nailer (without battery).

• Comprimento: 10.83 polegadas (27.5 cm)
• Largura: 9.45 polegadas (24 cm)
• Weight: 6.19 lbs (without battery)

3. Configuração

Instalação da bateria

1. Ensure the battery is fully charged using the provided 1-hour quick charger.
2. Alinhe a bateria com o compartimento da bateria na ferramenta.
3. Deslize a bateria para dentro do compartimento até ouvir um clique, indicando que ela está firmemente encaixada.

Loading Fasteners (Nails/Staples)

Figure 3: Steps for inserting staples or nails into the magazine.

1. Pressione o botão de liberação e retire a capa da revista.
2. Tilt the tool and place nails/staples into the track of the magazine channel. Ensure the fastener points are placed against the bottom of the magazine.
3. Feche a tampa do compartimento até encaixar no botão de desbloqueio.

Unha Viewer Janela

O prego viewer window allows you to quickly check the fastener level. When the window shows vermelho, it indicates the magazine is without nails. When it shows preto, it indicates the magazine contains nails.

4. Instruções de operação

Modos de disparo

The nail gun features two firing modes: Single Firing Mode and Contact Firing Mode. Select the desired mode using the switch located near the LED indicator.

Figure 4: Firing mode selection switch.

Modo de disparo único

• Shift the mode switch to the lado esquerdo (single firing icon).
• Depress the contact pin against the workpiece.
• Squeeze the trigger to fire a single fastener.

Modo de disparo de contato

• Shift the mode switch to the lado direito (contact firing icon).
• Aperte o gatilho.
• Depress the contact pin against the workpiece to fire fasteners continuously as the tool is moved along the surface.

Observação: If the contact pin is not depressed against the workpiece before squeezing the trigger (in single firing mode) or if the trigger is not squeezed before depressing the contact pin (in contact firing mode), the nail gun will not shoot fasteners due to the safety protection device.

Ajuste de profundidade

Adjust the fastener driving depth using the depth adjustment wheel located near the contact pin. Turning the wheel allows you to set the desired depth for various materials and applications.

Figure 5: Depth adjustment wheel.

Iluminação LED

The tool is equipped with LED lights on both sides to illuminate the work area, which is particularly useful in low-light conditions. The LED lighting can be activated via the LED Lighting & Indicator Switch.

Figure 6: LED lighting for the work area.

Indicador LED

The LED indicator provides visual feedback on the tool's status:

Figure 7: LED indicator and its meanings.

• Vermelho ligado: Bateria fraca.
• Vermelho piscando: Nails/staples are jammed.
• Verde Ligado: No nails/staples in the magazine.
• Verde piscando: Superaquecimento.
• Luz apagada: Estado operacional normal.

Vídeo oficial do produto

Video 1: This official video demonstrates the product's features, including loading fasteners, LED indicators, firing modes, and depth adjustment.

5. Manutenção

Clearing Jammed Fasteners

If the LED indicator turns red and flashes, it signifies that nails/staples are jammed. Follow these steps to clear the jam:

Figure 8: Quick Release Mechanism.

1. Remove the battery from the tool to prevent accidental firing.
2. Open the magazine using the quick release mechanism.
3. Carefully remove any jammed nails or staples from the magazine channel. A small tool like a screwdriver may be used to assist, but ensure it does not damage the tool.
4. Close the magazine and reinsert the battery.

Cuidados com a bateria

• Always use the provided DURATECH 20V Li-ion battery and charger.
• Recharge the battery at least once every three months to prevent over-discharge and potential damage, even if not in use.
• Guarde a bateria em local fresco e seco, longe da luz solar direta e de temperaturas extremas.

6. Solução De Problemas

Refer to the LED Indicator section (Section 4) for common issues and their corresponding indicator lights. If the issue persists after following the recommended steps (e.g., clearing jams, recharging battery), please contact customer support.

7. Especificações

Fixadores compatíveis

Figure 9: Compatible nail and staple types.

8. Garantia e Suporte

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official DURATECH website. Certifique-se de ter em mãos o número do modelo (024009) e os detalhes da compra ao entrar em contato com o suporte.