Cosmic Byte Starforge Tri-Mode Controller User Manual

Introdução

This manual provides detailed instructions for the Cosmic Byte Starforge Tri-Mode Controller. It covers setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device. Please read this manual thoroughly before using the controller.

Imagem: Frente view of the Cosmic Byte Starforge Tri-Mode Controller, showcasingraças ao seu design ergonômico e à disposição dos botões.

Principais características

• Optical Triggers with Locks: Provides ultra-fast actuation with two-level trigger locks for customizable response in various game genres.
• Joysticks TMR: Tunable Magnetic Resistance joysticks offer drift-free accuracy, customizable tension, and swappable modules (60gf, 70gf, 120gf, 150gf).
• Impulse Triggers & HD Vibration: Dual voice coil HD vibration motors deliver immersive haptic feedback.
• Conectividade Tri-Mode: Supports 2.4GHz Wireless (USB dongle), Bluetooth 5.3, and USB-C wired connections.
• Back Macro Buttons: Four programmable M1-M4 rear macro buttons for advanced inputs, alongside 18 total programmable keys, turbo/auto-fire modes, and joystick/trigger calibration.
• Personalização completa: Allows switching ABXY layouts, adjusting vibration strength (5 levels), and fine-tuning RGB lighting effects.
• Design ergonômico: Lightweight (255g) with a textured grip for comfortable extended use.
• Bateria de longa duração: 1200mAh battery provides 10-12 hours of playtime, with 3-4 hours USB-C charging.
• Giroscópio de 6 eixos: Built-in motion sensing for enhanced control and precise movements.

Guia de configuração

1. Carregando o controlador

Before first use, fully charge the controller using the provided USB-C cable. Connect the cable to the controller's USB-C port and to a power source (e.g., PC USB port, USB wall adapter). The indicator light will show charging status and turn off when fully charged. A full charge typically takes 3-4 hours.

Image: Illustration of the controller's 1200mAh battery and USB-C charging port.

2. Conectando o Controlador

The Starforge controller supports three connection modes: 2.4GHz Wireless, Bluetooth 5.3, and USB-C Wired.

Imagem: Traseira view of the controller showing the connection mode toggle switch, and a front view illustrating compatibility with PC, iOS, and Android.

2.1. 2.4GHz Wireless Mode (PC/Desktop)

1. Locate the 2.4GHz USB dongle (usually stored in the controller or packaging).
2. Plug the USB dongle into an available USB port on your PC.
3. Set the connection mode toggle switch on the back of the controller to the 2.4GHz wireless icon.
4. Press and hold the Home button on the controller until the indicator light flashes, then becomes solid, indicating a successful connection.

2.2. Bluetooth 5.3 Mode (PC, Android, iOS)

1. Set the connection mode toggle switch on the back of the controller to the Bluetooth icon.
2. On your device (PC, Android, iOS), enable Bluetooth and search for new devices.
3. Select "Cosmic Byte Starforge" from the list of available devices.
4. The indicator light on the controller will become solid once paired.
5. For iOS devices, ensure MFi (Made For iPhone/iPad) support is enabled in your device settings if required by the game.

2.3. USB-C Wired Mode (PC)

1. Connect the USB-C cable to the controller and the other end to your PC's USB port.
2. The controller will automatically switch to wired mode. No additional pairing is required.

Instruções de operação

1. TMR Replaceable Joysticks

The Starforge controller features Tunable Magnetic Resistance (TMR) joysticks with swappable modules. This allows you to customize joystick tension for different gaming preferences.

Image: Diagram showing the replaceable TMR joysticks and the four swappable modules with different resistance levels (60gf, 70gf, 120gf, 150gf).

Swapping Joystick Modules:

1. Gently pull the joystick cap upwards to remove it.
2. Carefully remove the existing joystick module.
3. Insert the desired new joystick module (60gf, 70gf, 120gf, or 150gf) into the slot, ensuring it is seated correctly.
4. Replace the joystick cap.

2. Optical Triggers with Trigger Locks

The optical triggers provide precise and rapid actuation. The trigger locks allow you to adjust the travel distance of the triggers.

Imagem: Traseira view of the controller highlighting the trigger lock switches, allowing instant adjustment of trigger sensitivity.

Using Trigger Locks:

• Locate the trigger lock switches on the underside of the controller.
• Toggle the switch to reduce trigger travel for faster response in games like FPS.
• Toggle the switch back for full trigger travel, suitable for racing games or precise control.

3. Macro Back Buttons (M1-M4)

The four programmable back buttons (M1, M2, M3, M4) allow you to assign complex button combinations or single functions for quick access.

Imagem: Traseira view of the controller highlighting the M1, M2, M3, and M4 macro buttons.

Programming Macro Buttons:

Refer to the official Cosmic Byte software for detailed instructions on programming these buttons. The software allows for comprehensive customization of key assignments, turbo functions, and calibration.

4. ABXY Button Switching

The controller supports switching the layout of the ABXY buttons to match different gaming conventions (e.g., Nintendo vs. Xbox layouts).

Image: Illustration showing the ABXY buttons and how their functions can be switched.

How to Switch ABXY Layout:

Consult the controller's software or specific key combination instructions for this function.

5. 6-Axis Gyroscope

The integrated 6-axis gyroscope enables motion-sensing controls in compatible games, allowing for precise aiming, steering, and other movements through tilting and rotation.

Image: Controller with an overlay illustrating the 6-axis gyroscope's motion-sensing capabilities.

6. RGB Lighting and Vibration Adjustment

The controller features customizable RGB lighting and adjustable vibration intensity (5 levels). These settings can typically be managed through the dedicated software.

Imagem: Topo view of the controller highlighting the RGB lighting strips and indicator light.

Manutenção

• Limpeza: Use um pano macio e seco para limpar o controle. Evite usar produtos químicos agressivos ou materiais abrasivos.
• Armazenar: Guarde o controlador em local fresco e seco, longe da luz solar direta e de temperaturas extremas.
• Cuidados com a bateria: Para prolongar a vida útil da bateria, evite descarregar completamente o controlador com frequência. Recarregue-o regularmente, mesmo que não o utilize por longos períodos.
• Joystick Modules: When swapping joystick modules, handle them carefully to avoid damage to the internal components.

Solução de problemas

Especificações

Garantia e Suporte

The Cosmic Byte Starforge Tri-Mode Controller comes with a 1 Year Warranty against Manufacturing Defects.

For warranty claims, technical support, or any product-related inquiries, please contact Cosmic Byte customer service. Keep your purchase invoice handy for warranty validation.

Manufacturer/Importer Contact Information:

Cosmic Byte, Prakash Warehousing, S. No.163, Hissa No 1-2-3-4-5A-5B/2/1, Phursungi, Pune 412308, Maharashtra, India.